施刚, 石永久, 王元清. 超高强度钢材钢结构的工程应用[J]. 建筑钢结构进展, 2008, 10(4): 32―38. Shi Gang, Shi Yongjiu, Wang Yuanqing. Engineering application of ultra-high strength steel structures[J]. Progress in Steel Building Structures, 2008, 10(4): 32―38. (in Chinese)
[2]
范重, 刘先明, 范学伟, 等. 国家体育场大跨度钢结构设计与研究[J]. 建筑结构学报, 2007, 28(2): 1―16. Fan Zhong, Liu Xianming, Fan Xuewei, et al. Design and research of large-span steel structure of the National Stadium[J]. Journal of Building Structures, 2007, 28(2): 1―16. (in Chinese)
[3]
陈振明, 张耀林, 彭明祥, 等. 国产高强钢及厚板在央视新台址主楼建筑中的应用[J]. 钢结构, 2009, 24(2): 34―38. Chen Zhenming, Zhang Yaolin, Peng Mingxiang, et al. Application of high-strength steel and thick steel plates to CCTV New Site Building[J]. Steel Construction, 2009, 24(2): 34―38. (in Chinese)
[4]
王国周, 赵文蔚. 焊接与热轧工字钢残余应力的测定[J]. 工业建筑, 1986, 16(7): 32―37. Wang Guozhou, Zhao Wenwei. Residual stress measurement for welded and hot-rolled I section steels[J]. Industrial Construction, 1986, 16(7): 32―37. (in Chinese)
[5]
GB 50017-2003, 钢结构设计规范[S]. 北京: 中国计划出版社, 2003. GB 50017-2003, Code for design of steel structures[S]. Beijing: China Planning Press, 2003. (in Chinese)
[6]
《钢结构设计规范》编制组. 《钢结构设计规范》应用讲解[M]. 北京: 中国计划出版社, 2003: 37―40. Code for design of steel structures committee. Application construal of code for design of steel structures in China[M]. Beijing: China Planning Press, 2003: 37―40. (in Chinese)
[7]
陈骥. 综合考虑残余应力、初偏心和初弯曲时轴心压杆的稳定系数[R]// 钢结构研究论文报告选集(第一册). 北京: 全国钢结构标准技术委员会, 1982: 1―14. Chen Ji. The stability coefficient of axially loaded compression members for summarizing the effect of residual stress, eccentricity and initial out-of-straightness[R]// Selections from Research Papers and Reports on Steel Structures (Volume 1). Beijing: China Technical Committee for Standards of Steel Structures, 1982: 1―14. (in Chinese)
[8]
BS EN 1993-1-1, Eurocode 3: Design of steel structures: Part 1-1: General rules and rules for buildings[S]. London: BSI, 2005.
[9]
European Convention for Constructional Steelworks. Manual on stability of steel structures: Part 2.2 mechanical properties and residual stresses[M]. Second Edition, Bruxelles: ECCS Publ., 1976: 31―46.
[10]
ANSI/AISC 360-10, Specification for structural steel buildings[S]. Chicago: AISC, 2010.
[11]
Galambos T V. Guide to stability design criteria for metal structures[M]. 5th ed. New York: John Wiley & Sons Inc., 1998: 30―42.
[12]
Rasmussen K J R, Hancock G J. Plate slenderness limits for high strength steel sections[J]. Journal of Constructional Steel Research, 1992, 23(1): 73―96.
[13]
Rasmussen K J R, Hancock G J. Tests of high strength steel columns[J]. Journal of Constructional Steel Research, 1995, 34(1): 27―52.
[14]
李开禧, 肖允徽, 铙晓峰, 等. 钢压杆的柱子曲线[J]. 重庆建筑工程学院学报, 1985(1): 24―33. Li Kaixi, Xiao Yunhui, Nao Xiaofeng, et al. Column curves for steel compression member[J]. Journal of Chongqing Institute of Architecture and Engineering, 1985(1): 24―33. (in Chinese)
[15]
International Association for Bridge and Structural Engineering. Use and application of high-performance steels for steel structures[M]. Zurich: IABSE, 2005: 136―143.
[16]
Pocock G. High strength steel use in Australia, Japan and the US[J]. The Structural Engineer, 2006, 84(21): 27―30.
[17]
Beg D. Hladnik L. Slenderness limit of class 3 I cross-sections made of high strength steel[J]. Journal of Constructional Steel Research, 1996, 38(8): 201―207.
[18]
班慧勇, 施刚, 石永久, 等. 超高强度钢材焊接截面残余应力分布研究[J]. 工程力学, 2008, 25(增刊II): 57―61. Ban Huiyong, Shi Gang, Shi Yongjiu, et al. Study on the residual stress distribution of ultra-high-strength-steel welded sections[J]. Engineering Mechanics, 2008, 25(Suppl II): 57―61. (in Chinese)
[19]
班慧勇, 施刚, 邢海军, 等. Q420等边角钢轴压杆稳定性能研究(I)——残余应力的试验研究[J]. 土木工程学报, 2010, 43(7): 14―21. Ban Huiyong, Shi Gang, Xing Haijun, et al. Stability of Q420 high strength steel equal-leg angle members under axial compression (I): Experimental study on the residual stress[J]. China Civil Engineering Journal, 2010, 43(7): 14―21. (in Chinese)
[20]
童乐为, 赵俊, 周锋, 等. Q460 高强度焊接H型钢残余应力试验研究[J]. 工业建筑, 2012, 42(1): 51―55. Tong Lewei, Zhao Jun, Zhou Feng, et al. Experimental investigation on longitudinal residual stress of Q460 high-strength steel welded h-section members[J]. Industrial Construction, 2012, 42(1): 51―55. (in Chinese)
[21]
GB/T 1591-2008, 低合金高强度结构钢[S]. 北京: 中国标准出版社, 2009. GB/T 1591-2008, High strength low alloy structural steels[S]. Beijing: Standards Press of China, 2009. (in Chinese)
[22]
GB 50011-2010, 建筑抗震设计规范[S]. 北京: 中国建筑工业出版社, 2010. GB 50011-2010, Code for seismic design of buildings[S]. Beijing: China Architecture & Building Press, 2010. (in Chinese)
[23]
JGJ81-2002, 建筑钢结构焊接技术规程[S]. 北京: 中国建筑工业出版社, 2002. JGJ81-2002, Technical specification for welding of steel structure of building[S]. Beijing: China Architecture & Building Press, 2002. (in Chinese)
[24]
GB/T 8110-2008, 气体保护电弧焊用碳钢、低合金钢焊丝[S]. 北京: 中国标准出版社, 2008. GB/T8110-2008, Welding electrodes and rods for gas shielding arc welding of carbon and low alloy steel[S]. Beijing: Standards Press of China, 2008. (in Chinese)
[25]
Tebedge N, Alpsten G, Tall L. Residual-stress measurement by the sectioning method[J]. Experimental Mechanics, 1973, 13(2): 88―96.
