全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
工程力学  2014 

焊钉连接件抗剪刚度计算方法研究

, PP. 85-90

Keywords: 组合结构桥梁,焊钉连接件,模型试验,抗剪刚度,计算式

Full-Text   Cite this paper   Add to My Lib

Abstract:

为建立组合结构桥梁常用的焊钉连接件抗剪刚度计算方法,通过共计40个焊钉抗剪承载性能模型试验,分析了焊钉在混凝土中的变形特点和受力机理,建立了焊钉连接件抗剪刚度计算式。研究结果表明:以剪力-滑移曲线对应滑移量为0.2mm处的割线模量作为抗剪刚度,所对应的剪力约为最大剪力的45%,并近似位于剪力-滑移曲线线性与非线性分界处;抗剪刚度计算式反映了焊钉直径、弹性模量及混凝土弹性模量的影响,物理意义明确,与试验数据具有较高的吻合度。

References

[1]  刘玉擎. 组合结构桥梁[M]. 北京: 人民交通出版社, 2005: 21―35.
[2]  Liu Yuqing. Steel-concrete hybrid bridge [M]. Beijing: China Communication Press, 2005: 21―35. (in Chinese)
[3]  曾兴贵, 周东华, 李龙起, 等. 组合梁界面滑移的计算分析[J]. 工程力学, 2013, 30(6): 162―174.
[4]  Zeng Xinggui, Zhou Donghua, Li Longqi, et al. Calculation and analysis of interface slip of composite beams [J]. Engineering Mechanics, 2013, 30(6): 162―174. (in Chinese)
[5]  Ollgaard J G, Slutter R G, Fisher J W. Shear strength of stud connectors in lightweight and normal-weight concrete [J]. AISC Engineering Journal, 1971, 8(2): 55―64.
[6]  Xue Dongyan, Liu Yuqing, Yu Zhen, et al. Static behavior of multi-stud shear connectors for steel-concrete composite bridge [J]. Journal of Constructional Steel Research, 2012, 74: 1―7.
[7]  Oehlers D J, Coughlan C G. The shear stiffness of stud shear connections in composite beams [J]. Journal of Constructional Steel Research, 1986, 6(4): 273―284.
[8]  BS EN 1994-2. Eurocode 4: Design of composite steel and concrete structures, Part 1-1: General rules and rules for buildings [S]. Brussels: European Committee for Standardization, 2004.
[9]  日本鋼構造協会. 頭付きスタッドの押拔き試験方法(案)とスタッドに関する研究の現状[S]. 日本鋼構造協会, 1996.
[10]  Japanese Society of Steel Construction. Standard on push-out test for headed stud (draft) [S]. Japanese Society of Steel Construction, 1996. (in Japanese)
[11]  Wang Y C. Deflection of steel-concrete composite beams with partial shear interaction [J]. Journal of Structural Engineering, 1998, 124(10): 1159―1165.
[12]  Johnson R P and May I M. Partial-interaction design of composite beams [J]. Structure Engineer, 1975, 8(53): 305―311.
[13]  GB/T 10433-2002, 电弧螺柱焊用圆柱头焊钉[S]. 北京: 中国质检出版社, 2002.
[14]  GB/T 10433-2002, Cheese head studs for arc stud welding [S]. Beijing: China Zhijian Publishing House, 2002. (in Chinese)
[15]  Wu Hengli. Comprehensive stiffness principal with biparameter method used in calculating lateral loaded pile [M]. Beijing: China Communication Press, 1990. (in Chinese)
[16]  Shim C S, Lee P G, Yoon T Y. Static behavior of large stud shear connectors [J]. Engineering Structures, 2004, 26(12): 1853―1860.
[17]  周安, 戴航, 刘其伟. 栓钉连接件极限承载力及剪切刚度的试验[J]. 工业建筑, 2007, 37(10): 84―87. Zhou An, Dai Hang, Liu Qiwei. Experimental research on ultimate strength and shear stiffness of headed studs [J]. Industrial Construction, 2007, 37(10): 84―87. (in Chinese)
[18]  Hawkins N M. The strength of stud shear connectors [J]. Institution of Engineers (Australia) Civil Engineering Transactions, 1973, CE15(1): 46―52.
[19]  Davies C. Small-scale push-out tests on welded stud shear connectors [J]. Concrete, 1967, 1(3): 311―316.
[20]  Valente I B, Cruz P J S. Experimental analysis of shear connection between steel and lightweight concrete [J]. Journal of Constructional Steel Research, 2009, 65(10): 1954―1963.
[21]  Thurlimann B. Fatigue and static strength of shear stud connectors [C]// ACI Journal Proceedings. ACI, 1959, 55(6): 1287―1302.
[22]  吴恒立. 计算推力桩的综合刚度原理和双参数法[M]. 北京: 人民交通出版社, 1990.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133