R. Determination of concrete fracture parameters based on two-parameter and size effect models using split-tension cubes [J]. Engineering Fracture Mechanics, 2010, 77(12): 2233―2250.
[2]
R. Determination of concrete fracture parameters based on peak-load method with diagonal split-tension cubes [J]. Engineering Fracture Mechanics, 2012, 82: 100―104.
[3]
Qingbin, Deng Zongcai, Fu Hua. Effect of aggregate type on mechanical behavior of dam concrete [J]. ACI Materials Journal, 2004, 101(6): 483―492.
[4]
A, Modeer M, Petersson P E. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements [J]. Cement and Concrete Research, 1976, 6(6): 773―782.
[5]
Z P, Oh B H. Crack band theory for fracture concrete [J]. RILEM, Materials and Structures, 1983, 16(3): 155―157.
[6]
Y S, Shah S P. Two-parameter fracture model for concrete [J]. ASCE, Journal of Engineering Mechanics, 1985, 111(10): 1227―1241.
[7]
B L, Nallathambi P. Effective crack model for the determination of fracture toughness () of concrete [J]. Engineering Fracture Mechanics, 1990, 35(4/5): 637―645.
[8]
Z P, Kazemi M T. Determination of fracture energy, process zone length, and brittleness number from size effect with application to rock and concrete [J]. International Journal of Fracture, 1990, 44(2): 111―131.
[9]
Shilang, Reinhardt H W. Determination of double-K criterion for crack propagation in quasi-brittle fracture, Part III: Compact tension specimens and wedge splitting specimens [J]. International Journal of Fracture, 1999, 98(2): 179―193.
[10]
Y S, Shah S P. A fracture toughness criterion for concrete [J]. Engineering Fracture Mechanics, 1985, 21(5): 1055―1069.
[11]
T, Ouyang C, Shah S H. A simple method for determining fracture parameters from peak loads [J]. ACI Materials Journal, 1996, 93(2): 147―157.
[12]
S, Tang T, Zollinger D G, et al. Splitting tension tests to determine concrete fracture parameters by peak-load method [J]. Advanced Cement Based Materials, 1997, 5(1): 18―28.
[13]
Zongcai, Li Qingbin, Fu Hua. Comparison between mechanical properties of dam concrete and sieved concrete [J]. Journal of Materials in Civil Engineering, ASCE, 2008, 20(4): 321―326.
[14]
E, Wittmann F H. The wedge splitting test, a new method of performing stable fracture mechanics tests [J]. Engineering Fracture Mechanics, 1990, 35(1/2/3): 117―125.
[15]
赵艳华, 吴智敏, 等. 楔入劈拉法研究混凝土断裂能[J]. 水力发电学报, 2003, 22(4): 15―22. Xu Shilang, Zhao Yanhua, Wu Zhimin, et al. The experimental study on the fracture energy of concrete using wedge splitting specimens [J]. Journal of Hydroelectric Engineering, 2003, 22(4): 15―22. (in Chinese)
[16]
S, Veselý V, Řoutil L. Two-parameter fracture mechanical analysis of a near-crack-tip stress field in wedge splitting test specimens [J]. Computers and Structures, 2011, 89(21/22): 1852―1858.
[17]
H, Paris P C, Irwin G R. The stress analysis of cracks handbook [M]. New York: ASME Press, 2000: 58―71.
[18]
5332-2005, 水工混凝土断裂试验规程[S]. 北京: 中华人民共和国国家发展改革委员会, 2005. DL/T 5332-2005, Norm for fracture test of hydraulic concrete [S]. Beijing: National Development and Reform Commission, 2005. (in Chinese)
[19]
G V, Elices M, Planas J. Stress intensity factors for wedge-splitting geometry [J]. International Journal of Fracture, 1996, 81(2): 113―24.
[20]
陈晋, 董伟. 混凝土非标准楔入劈拉试件断裂参数的确定[J]. 水利与建筑工程学报, 2010, 8(1): 1―4, 18. Zhao Yanhua, Chen Jin, Dong Wei. Determination for fracture parameters of non-standard wedge splitting specimen of concrete [J]. Journal of Water Resources and Architectural Engineering, 2010, 8(1): 1―4, 18. (in Chinese)
[21]
林鹏, 胡昱, 管俊峰. 金沙江溪洛渡水电站特高拱坝全级配混凝土断裂韧度试验研究[R]. 北京: 清华大学, 2011. Li Qingbin, Lin Peng, Hu Yu, Guan Junfeng. Fracture behavior of fully-graded concrete of the Xiluodu dam [R]. Beijing: Tsinghua University, 2011. (in Chinese)
