新一代高技术薄带冷轧机的发展趋势[J]. 上海金属, 1995, 17(4): 1―8.[1] Chen Xianlin. Development trend of the new generation of high-tech thin strip cold rolling mills [J]. Shanghai Metals, 1995, 17(4): 1―8. (in Chinese)
[2]
板形理论的进步与应用[J]. 冶金设备, 2001(1): 1―11.[2] Zhang Jinzhi. Development and application of shape theory [J]. Metallurgical Equipment, 2001(1): 1―11. (in Chinese)
[3]
G, Karhausen K F, Pütz P D. Methods of describing and assessing shape deviation in strips [J]. MPT International, 2002, 25(3): 58―65.
[4]
J G. Control of strip shape during cold rolling [J]. Journal of the Iron and Steel Institute, 1968, 206(12): 1203―1206.
[5]
J V, Seccombe D A. Bethlehem's Contribution to the Mathematical Modeling of Cold Rolling in Tandem Mills [J]. Iron Steel Engineer, 1980, 57(9): 47―58.
[6]
W L. Cold rolling of steel [M]. New York: CRC Press, 1978: 20―35.
[7]
F D, Rammerstorfer F G, Friedl N, et al. Buckling phenomena related to rolling and leveling of sheet metal [J]. International Journal of Mechanical Science, 2000, 42(10): 1887―1910.
[8]
F G, Fischer F D, Friedl N. Buckling of free infinite strips under residual stresses and global tension [J]. Journal of Applied Mechanics, 2001, 68(3): 399―404.
[9]
F D, Rammerstorfer F G, Friedl N. Residual stress-induced center wave buckling of rolled strip metal [J]. Journal of Applied Mechanics, 2003, 70(1): 84―90.
[10]
T, Gates D J. Analysis of the effect of strip buckling on stability of strip lateral motion with application to cold rolling of steel [J]. Journal of Dynamic Systems, 2008, 130(1): 1―7.
[11]
陈先霖. 轧制带材的瓢曲生成路径[J]. 北京科技大学学报, 1994, 16(1): 53―57.[11] Yang Quan, Chen Xianlin. The deforming route of buckled waves of rolled strip [J]. Journal of University of Science and Technology Beijing, 1994, 16(1): 53―57. (in Chinese)
[12]
Fujwara, Tetsu Matoba, Yasuhiro Itazuri, et al. Improvement of high-strength steel sheet mechanical properties by rolling with small-diameter rolls [J]. Journal of the JSTP, 1997, 38(440): 819―823.
[13]
宝钢镀锡板翘曲原因分析与对策[J]. 宝钢技术, 2004(1): 36―39.[17] He Jianfeng. Cause analysis of tinplate warp and our countermeasures [J]. Bao Steel Technology, 2004(1): 36―39. (in Chinese)
[14]
柳谋渊, 张杏耀, 等. 平整轧制中轧件L弯成因分析与及对策[J]. 轧钢, 2003, 20(2): 20―22.[18] Wei Liqun, Liu Mouyuan, Zhang Xingyao, et al. Analysis of the causes of L camber of strip in skin passing and its countermeasures [J]. Steel Rolling, 2003, 20(2): 20―22. (in Chinese)
[15]
薄带钢板形翘曲与纵向瓢曲变形行为研究 [D]. 北京: 北京科技大学, 2011.[19] Dai Jietao. Deformation of warping and longitudinal buckling for thin and wide strip [D]. Beijing: University of Science and Technology Beijing, 2011. (in Chinese)
[16]
张清东. 冷轧薄板中浪板形缺陷的屈曲及后屈曲理论与轧制试验研究[J]. 机械工程学报, 2011, 47(2): 44―50.[20] Dai Jietao, Zhang Qingdong. Analysis and experiment on central buckling and post buckling of thin cold-rolled sheet [J]. Chinese Journal of Mechanical Engineering, 2011, 47(2): 44―50. (in Chinese)
[17]
张清东, 秦剑. 薄宽冷轧带钢局部板形屈曲行为解析研究[J]. 工程力学, 2011, 28(10): 236―242.[21] Dai Jietao, Zhang Qingdong, Qin Jian. Analysis of local buckling for thin cold-rolled strip [J]. Engineering Mechanics, 2011, 28(10): 236―242. (in Chinese)
[18]
戴杰涛. 带钢板形翘曲变形行为的仿真[J]. 北京科技大学学报, 2011, 33(8): 1006―1012.[22] Zhang Qingdong, Dai Jietao. Simulation of warping deformation in thin steel strips [J]. Journal of University of Science and Technology Beijing, 2011, 33(8): 1006―1012. (in Chinese)
[19]
板壳稳定性理论[M]. 武汉: 华中理工大学出版社, 1996: 24―27.[23] Wu Lianyuan. Plate stability theory [M]. Wuhan: Press of Huazhong University of Science and Technology, 1996: 24―27. (in Chinese)
[20]
冷带轧机板形判别模型的有限条分析[D]. 秦皇岛: 东北重型机械学院, 1993.[12] Lin Zhenbo. Finite strip method research on shape discrimination model in cold strip rolling mill [D]. Qinhuangdao: Northeast Heavy Machinery Institute, 1993. (in Chinese)
[21]
连家创. 冷轧带材临界屈曲问题的有限条法研究[J]. 东北重型机械学院学报, 1995, 19(4): 288―293.[13] Lin Zhenbo, Lian Jiachuang. Finite strip method research on critical buckling problem of cold rolled strip [J]. Journal of Northeast Heavy Machinery Institute, 1995, 19(4): 288―293. (in Chinese)
[22]
刘宏民. 求解带材轧后大挠度屈曲变形的一个通用方法[J]. 机械工程学报, 1994, 30(增刊): 21―27.[14] Bian Yuhong, Liu Hongmin. Universal method analyzing the large deflection buckling deformation of rolled strip [J]. Chinese Journal of Mechanical Engineering, 1994, 30(Suppl): 21―27. (in Chinese)
[23]
杨荃. 冷轧带钢整体和局部屈曲及后屈曲的有限元分析[J]. 北京科技大学学报, 2000, 22(4): 377―380.[15] Qing Weijie, Yang Quan. Study on the cold rolled strip global and local buckling, post-buckling using the finite element method [J]. Journal of University of Science and Technology Beijing, 2000, 22(4): 377―380. (in Chinese)
