周国强, 郭金玉. 基于弹塑性全过程的在役井架承载性能仿真[J]. 计算机仿真, 2013, 30(10): 143―148.[15] Liu Jinmei, Zhou Guoqiang, Guo Jinyu. Simulation for bearing capacity based on the full range elastic-plastic analysis of oil-derrick in-service [J]. Computer Simulation, 2013, 30(10): 143―148. (in Chinese)
时培明. 基于频率和当量损伤系数的井架钢结构损伤识别[J]. 工程力学, 2011, 25(9): 109―114. Han Dongying, Shi Peiming. Damage identification of derrick steel structures based on frequency and equivalent damage coefficient [J]. Engineering Mechanics, 2011, 25(9): 109―114. (in Chinese)
[4]
袁英战, 周国强. 含损伤缺陷采油井架钢结构双重非线性承载性能分析[J]. 建筑结构学报, 2000, 21(6): 62―67.[2] Wang Yuanqing, Yuan Yingzhan, Zhou Guoqiang. Double nonlinear analysis of the loading capacity of drilling derrick steel structures with defects and defacements [J]. Journal of Building Structures, 2000, 21(6): 62―67. (in Chinese)
[5]
李子丰, 周国强. 基于模型局部修正的井架钢结构极限承载力分析[J]. 工程力学, 2007, 24(10): 175―179, 185.[3] Han Dongying, Li Zifeng, Zhou Guoqiang. Ultimate bearing capacity analysis of derrick steel structures based on partial model updating theory [J]. Engineering Mechanics, 2007, 24(10): 175―179, 185. (in Chinese)
[6]
李子丰, 周国强. 在役石油钻机井架极限承载仿真模型研究[J]. 石油学报, 2007, 28(2): 120―123, 128. Han Dongying, Li Zifeng, Zhou Guoqiang. Study on simulation model for ultimate bearing capacity of in-service oil drilling derrick [J]. ACTA Petroleisinica, 2007, 28(2): 120―123, 128. (in Chinese)
[7]
周国强, 韩国有. 基于有限元动力模型的在役钻机井架仿真模型[J]. 石油学报, 2009, 30(5): 788―792. Liu Jinmei, Zhou Guoqiang, Han Guoyou. Simulation model for in-service rig derrick based on finite dynamic model [J]. ACTA Petroleisinica, 2009, 30(5): 788―792. (in Chinese)
[8]
彭涛, 陈政清. 佛山东平大桥静动力分层次有限元模型修正研究[J]. 振动与冲击, 2007, 26(6): 162―165. Tian Zhongchu, Peng Tao, Chen Zhengqing. Study on dynamic and static stratified finite element model updating for Foshan Dongping bridge [J]. Journal of Vibration and Shock, 2007, 26(6): 162―165. (in Chinese)
[9]
袁万城, 张启伟. 悬索桥结构基于敏感性分析的动力有限元模型修正[J]. 土木工程学报, 2000, 33(1): 9―14.[7] Fan Lichu, Yuan Wancheng, Zhang Qiwei. Sensitivity-based FE model updating of a suspension bridge [J]. China Civil Engineering Journal, 2000, 33(1): 9―14. (in Chinese)
[10]
周国强. 基于ANSYS优化设计的井架模型修正[J]. 石油矿场机械, 2007, 36(11): 39―42. Yu Biao, Zhou Guoqiang. Model updating of the derrick for optimization design based upon ANSYS [J]. Oil Field Equipment, 2007, 36(11): 39―42. (in Chinese)
[11]
周传荣. 一个基于优化的有限元模型修正方法[J]. 振动与冲击, 2003, 22(2): 33―35.[9] Liu Jicheng, Zhou Chuanrong. FE model updating method based on optimization [J]. Journal of Vibration and Shock, 2003, 22(2): 33―35. (in Chinese)
[12]
刘金梅, 周国强, 等. 基于海洋波浪脉动的海洋钻机井架结构试验模态识别[J]. 大庆石油学院学报, 2009, 33(1): 60―64.[10] Han Guoyou, Liu Jinmei, Zhou Guoqiang, et al. Experimental modal identification of offshore drilling rig derrick structure based on the ocean waves ripple [J]. Journal of Daqing Petroleum Institute, 2009, 33(1): 60―64. (in Chinese)
[13]
周国强, 韩国有, 等. 波浪作用下海洋石油井架的模态参数识别与承载力评价[J]. 海洋工程, 2009, 27(1): 22―27.[11] Liu Jinmei, Zhou Guoqiang, Han Guoyou, et al. Modal parameters identification and bearing capacity evaluation for ocean oil-derrick under wave excitation [J]. The Ocean Engineering, 2009, 27(1): 22―27.
[14]
潘宏侠, 郝刚. 基于ANSYS的钢塔架结构地震响应分析[J]. 机械管理开发, 2012(1): 194―195, 197[12] Zhang Zhijie, Pan Hongxia, Hao Gang. Seismic analysis of steel tower structure based on ANSYS [J]. Mechanical Management and Development, 2012(1): 194―195, 197. (in Chinese)
[15]
王元清, 周国强. 采油井架钢结构非线性力学行为分析[J]. 工程力学, 2000, 17(6): 104―109.[13] Yuan Yingzhan, Wang Yuanqing, Zhou Guoqiang. Nonlinear analysis of the mechanical behaviour of oil derrick steel structures [J]. Engineering Mechanics, 2000, 17(6): 104―109. (in Chinese)
[16]
周国强. 基于ANSYS6.0钻机井架几何非线性分析[J]. 石油矿场机械, 2004, 33(1): 12―14.[14] Han Dongying, Zhou Guoqiang. Geometric nonlinearity analysis of A-shaped drilling derrick with ANSYS6.0 [J]. Oil Field Equipment, 2004, 33(1): 12―14. (in Chinese)
