European Convention for Constructional Steelworks. Manual on Stability of Steel Structures: Part 2.2 Mechanical Properties and Residual Stresses [M]. Second Edition, Bruxelles: ECCS Publ, 1976: 31―46.
[2]
Nishino F, Ueda Y, Tall L. Experimental investigation of the buckling of plates with residual stresses [C]// Test methods for compression members. Philadelphia, PA: American Society for Testing and Materials, 1967, 419: 12―30.
[3]
International association for bridge and structural engineering. use and application of high-performance steels for steel structures [M]. Zurich: IABSE, 2005: 136―143.
[4]
Pocock G. High strength steel use in Australia, Japan and the US [J]. The Structural Engineer, 2006, 84(21): 27―30.
[5]
施刚, 石永久, 王元清. 超高强度钢材钢结构的工程应用[J]. 建筑钢结构进展, 2008, 10(4): 32―38.[3] Shi Gang, Shi Yongjiu, Wang Yuanqing. Engineering application of ultra-high strength steel structures [J]. Progress in Steel Building Structures, 2008, 10(4): 32―38. (in Chinese)
[6]
范重, 刘先明, 范学伟, 等. 国家体育场大跨度钢结构设计与研究[J]. 建筑结构学报, 2007, 28(2): 1―16.[4] Fan Zhong, Liu Xianming, Fan Xuewei, et al. Design and research of large-span steel structure of the National Stadium [J]. Journal of Building Structures, 2007, 28(2): 1―16. (in Chinese)
[7]
陈振明, 张耀林, 彭明祥, 等. 国产高强钢及厚板在央视新台址主楼建筑中的应用[J]. 钢结构, 2009, 24(2): 34―38.[5] Chen Zhenming, Zhang Yaolin, Peng Mingxiang, et al. Application of high-strength steel and thick steel plates to CCTV new site building [J]. Steel Construction, 2009, 24(2): 34―38. (in Chinese)
[8]
田黎敏, 郝际平, 戴立先, 等. 深圳湾体育中心结构施工过程模拟分析[J]. 建筑结构, 2011, 41(12): 118―121.[6] Tian Limin, Hao Jiping, Dai Lixian, et al. Simulation analysis on erection procedure of Shenzhen bay sports center [J]. Building Structure, 2011, 41(12): 118―121. (in Chinese)
[9]
周思红, 朱忠义, 齐五辉, 等. 凤凰国际传媒中心结构设计[J]. 建筑结构, 2011, 41(9): 56―62.[7] Zhou Sihong, Zhu Zhongyi, Qi Wuhui, et al. Structural design on the project of phoenix international media center [J]. Building Structure, 2011, 41(9): 56―62. (in Chinese)
[10]
班慧勇, 施刚, 石永久, 王元清. 建筑结构用高强度钢材力学性能研究进展[J]. 建筑结构, 2013, 43(2): 88―94.[8] Ban Huiyong, Shi Gang, Shi Yongjiu, Wang Yuanqing. Research advances on mechanical properties of high strength structural steels [J]. Building Structure, 2013, 43(2): 88―94. (in Chinese)
[11]
GB50017-2003, 钢结构设计规范[S]. 北京: 中国计划出版社, 2003.[9] GB50017-2003, Code for design of steel structures [S]. Beijing: China Planning Press, 2003. (in Chinese)
[12]
施刚, 班慧勇, 石永久, 王元清. 高强度钢材钢结构研究进展综述[J]. 工程力学, 2013, 30(1): 1―13.[10] Shi Gang, Ban Huiyong, Shi Yongjiu, Wang Yuanqing. Overview of Research Progress for High Strength Steel Structures [J]. Engineering Mechanics, 2013, 30(1): 1―13. (in Chinese)
[13]
Rasmussen K J R, Hancock G J. Plate slenderness limits for high strength steel sections [J]. Journal of Constructional Steel Research, 1992, 23(1): 73―96.
[14]
Rasmussen K J R, Hancock G J. Tests of high strength steel columns [J]. Journal of Constructional Steel Research, 1995, 34(1): 27―52.
[15]
Beg D. Hladnik L. Slenderness limit of class 3 I cross-sections made of high strength steel [J]. Journal of Constructional Steel Research, 1996, 38(8): 201―207.
[16]
班慧勇, 施刚, 石永久, 王元清. 超高强度钢材焊接截面残余应力分布研究[J]. 工程力学, 2008, 25(增刊II): 57―61.[14] Ban Huiyong, Shi Gang, Shi Yongjiu, Wang Yuanqing. Study on the residual stress distribution of ultra-high-strength-steel welded sections [J]. Engineering Mechanics, 2008, 25(Suppl II): 57―61. (in Chinese)
[17]
Ban H Y, Shi G, Bai Y, Shi Y J, Wang Y Q. Residual stress of 460MPa high strength steel welded I section: Experimental investigation and modeling [J]. International Journal of Steel Structures, 2013, 13(4): 691―705.
[18]
童乐为, 赵俊, 周锋, 等. Q460 高强度焊接H型钢残余应力试验研究[J]. 工业建筑, 2012, 42(1): 51―55.[16] Tong Lewei, Zhao Jun, Zhou Feng, et al. Experimental investigation on longitudinal residual stress of Q460 high-strength steel welded h-section members [J]. Industrial Construction, 2012, 42(1): 51―55. (in Chinese)
[19]
Tebedge N, Alpsten G, Tall L. Residual-stress measurement by the sectioning method [J]. Experimental Mechanics, 1973, 13(2): 88―96.
[20]
王国周, 赵文蔚. 焊接与热轧工字钢残余应力的测定[J]. 工业建筑, 1986, 16(7): 32―37.[18] Wang Guozhou, Zhao Wenwei. Residual stress measurement for welded and hot-rolled I section steels [J]. Industrial Construction, 1986, 16(7): 32―37. (in Chinese)
[21]
班慧勇, 施刚, 邢海军, 等. Q420等边角钢轴压杆稳定性能研究(I)—残余应力的试验研究[J]. 土木工程学报, 2010, 43(7): 14―21.[19] Ban Huiyong, Shi Gang, Xing Haijun, et al. Stability of Q420 high strength steel equal-leg angle members under axial compression (I): Experimental study on the residual stress [J]. China Civil Engineering Journal, 2010, 43(7): 14―21. (in Chinese)
[22]
钢结构规范管理组. 关于受压构件科研专题采用残余应力统一模式的通知[R]. 北京: 钢结构规范管理组, 1983: 1―5.[20] Code for design of steel structures committee. Notice about adopting the unified residual stress distribution for compression members research [R]. Beijing: CDSSC, 1983: 1―5. (in Chinese)
[23]
Iwatsubo K, Yamao T. An experimental study on the ultimate strength and behavior of members made of high strength steel with low-yield ratio [J]. Memoirs-Faculty of Engineering Kumamoto University, 2000, 45(1): 1―13.
[24]
Estuar F R, Tall L. Experimental investigation of welded built-up columns [J]. Welding Journal, 1963, 42(4): 164―176.
[25]
Mcfalls R K, Tall L. A study of welded columns manufactured from flame-cut plates [J]. Welding Journal, 1969, 48(4): 141―153.
[26]
Hasham A S, Rasmussen K J R. Section capacity of thin-walled I-section beam-columns [J]. Journal of Structural Engineering, 1998, 124(4): 351―359.
[27]
Ikeda K, Kihara H. Brittle fracture strength of welded joints [J]. Welding Journal, 1970, 49(3): S106―S114.
[28]
《钢结构设计规范》编制组. 《钢结构设计规范》应用讲解[M]. 北京: 中国计划出版社, 2003: 37―40.[26] Code for design of steel structures committee. Application construal of code for design of steel structures in China [M]. Beijing: China Planning Press, 2003: 37―40. (in Chinese)
[29]
李开禧, 肖允徽, 铙晓峰, 等. 钢压杆的柱子曲线[J]. 重庆建筑工程学院学报, 1985(1): 24―33.[27] Li Kaixi, Xiao Yunhui, Nao Xiaofeng, et al. Column curves for steel compression member [J]. Journal of Chongqing Institute of Architecture and Engineering, 1985(1): 24―33. (in Chinese)
