郭彦林, 张博浩, 王小安, 等. 装配式防屈曲支撑设计理论研究进展[J]. 建筑科学与工程学报, 2013, 30(1): 1―12. Guo Yanlin, Zhang Bohao, Wang Xiao’an, et al. Research progress on design theory of assembled buckling- restrained brace [J]. Journal of Architecture and Civil Engineering, 2013, 30(1): 1―12. (in Chinese)
[2]
Kimura K, Yoshioka K, Takeda T, et al. Tests on braces encased by mortar in-filled steel tubes [C]// Summaries of Technical Papers of Annual Meeting, Japan: Architectural Institute of Japan, 1976: 1―42.
[3]
Takahashi S, Mochizuki N. Experimental study on buckling of unbonded braces under axial compressive force: part 1 [C]// Summaries of Technical Papers of Annual Meeting, Japan: Architectural Institute of Japan: 1979: 1623―1626.
[4]
Ju Y K, Kim M H, Kim J, et al. Component tests of buckling-restrained braces with unconstrained length [J]. Engineering Structures, 2009, 31(2): 507―516.
[5]
Wang Xiao’an, Guo Yanlin, Tian Guangyu, et al. A design method for a new type of assembled steel buckling-restrained braces [C]// Proceeding of Seventh International Conference on Advances in Steel Structures, Nanjing, Southeast University Press, 2012: 1042―1051.
[6]
郭彦林, 王小安. 一种四角钢组合约束型防屈曲支撑的外围约束比取值研究 [J]. 工程力学, 2013, 30(10): 35―45. Guo Yanlin, Wang Xiao’an. Study on the restrain ratio of a four-angle assembled steel buckling-restrained brace [J]. Engineering Mechanics, 2013, 30(10): 35―45. (in Chinese)
[7]
Genna F, Gelfi P. Analysis of the lateral thrust in bolted steel buckling-restrained braces. I: Experimental and numerical results [J]. Journal of Structural Engineering, 2011, 138(10): 1231―1243.
[8]
Fujimoto M, Wada A, Saeki E. A study on the unbonded brace encased in buckling-restraining concrete and steel tube [J]. Journal of Structural and Construction Engineering, AIJ, 1988, 34: 249―258.
[9]
郭彦林, 江磊鑫. 型钢组合装配式防屈曲支撑性能及设计方法研究[J]. 建筑结构, 2010, 40(1): 30―37. Guo Yanlin, Jiang Leixin. Behavior and application of buckling-restrained braces assembled with section steels [J]. Building Structure, 2010, 40(1): 30―37. (in Chinese)
[10]
AIJ 1997, Recommendations for design and construction of concrete filled steel tubular structures [S]. Architectural Institute of Japan, Tokyo, 1997.
[11]
ENV 1994 1-1:2004, Eurocode 4. Design of composite steel and concrete structures, Part 1.1, General rules and rules for buildings [S]. European Committee for Standardization, Brussels, 2004.
DBJ 13-51-2003, Technical specification for concrete- filled steel tubular structures [S]. Fuzhou: Fujian Province Engineering Construction Standardization Association of Science and Technology, 2003. (in Chinese)
[14]
郭彦林, 江磊鑫. 双矩管带肋约束型装配式防屈曲支撑的设计方法[J].建筑科学与工程学报, 2010, 27(2): 67―74. Guo Yanlin, Jiang Leixin. Design method of buckling-restrained braces assembled with dual ribbed rectangular hollow [J]. Journal of Architect ure and Civil Engineering, 2010, 27(2): 67―74. (in Chinese)
[15]
方鄂华, 钱稼茹, 叶列平. 高层建筑结构设计[M]. 北京: 中国建筑工业出版社, 2003: 15―17. Fang E’hua, Qian Jiaru, Ye Lieping. Design of high rise building structure [M]. Beijing: China Architecture & Building Press, 2003: 15―17. (in Chinese)
[16]
陈骥. 钢结构稳定理论与设计[M]. 北京: 科学出版社, 2001: 546―551. Chen Ji. Stability of steel structures theory and design [M]. Beijing: Science Press, 2001: 546―551. (in Chinese)
[17]
Lu L W. Stability of frames under primary bending moments [J]. Journal of Structural Division, ASCE, 1963, 89(3): 35―62.
