Xie Q. State of the art of buckling-restrained braces in Asia [J]. Journal of Constructional Steel Research, 2005, 61(6): 727―748.
[2]
马宁, 吴斌, 赵俊贤, 等. 十字形内芯全钢防屈曲支撑构件及子系统足尺试验[J]. 土木工程学报, 2010, 43(4): 1―7. Ma Ning, Wu Bin, Zhao Junxian, et al. Full scale uniaxial and subassemblage tests on the seismic behavior of all-steel buckling-resistant brace [J]. China Civil Engineering Journal, 2010, 43(4): 1―7. (in Chinese)
[3]
郭彦林, 江磊鑫. 双矩管带肋约束型装配式防屈曲支撑的设计方法[J]. 建筑科学与工程学报, 2010, 27(2): 67―74. Guo Yanlin, Jiang Leixin. Design method of buckling- restrained braces assembled with dual ribbed rectangular hollow [J]. Journal of Architecture and Civil Engineering, 2010, 27(2): 67―74. (in Chinese)
[4]
赵俊贤, 吴斌. 防屈曲支撑的工作机理及稳定性设计方法[J]. 地震工程与工程振动, 2009, 29(3): 131―139. Zhao Junxian, Wu Bin. Working mechanism and stability design methods of buckling-restrained braces [J]. Journal of Earthquake Engineering and Engineering Vibration, 2009, 29(3): 131―139. (in Chinese)
[5]
郭英涛, 任文敏. 关于限制失稳的研究进展[J]. 力学进展, 2004, 34(1): 41―52. Guo Yingtao, Ren Wenmin. Some advances in confined buckling [J]. Advances in Mechanics, 2004, 34(1): 41―52. (in Chinese)
[6]
Sridhara B N. Sleeved compression member [P]. USA: 5175972, 1993.
[7]
Prasad B K. Experimental investigation of sleeved column [C]. Proceedings of the 33rd AIAA/ASCE Structures, Structural Dynamics and materials Conference, Dallas, USA: AIAA/ASCE, 1992: 991―999.
[8]
Domokos G, Holmes P, Royce B. Constrained Euler buckling [J]. Journal of Nonlinear Science, 1997, 7(3): 281―314.
[9]
哈敏强. 无粘结钢支撑性能研究及其应用[D]. 上海: 同济大学, 2004. Ha Minqiang. Study on the mechanical performances and applications of conventional and innovative buckling restrained braces [D]. Shanghai: Tongji University, 2004. (in Chinese)
[10]
Chai H. The post-bucking response of a bi-laterally constrained column [J]. Journal of the Mechanics and Physics of Solids, 1998, 46(7): 1151―1181.
[11]
申波, 邓长根. 双钢管构件由点接触到线接触的连续过渡[J]. 工程力学, 2007, 24(2): 154―160. Shen Bo, Deng Changgen. Continuous transition from point contact to line contact between the axially compressed inner core and the flexible sleeve in a sleeved column [J]. Engineering Mechanics, 2007, 24(2): 154―160. (in Chinese)
[12]
申波, 邓长根. 柔性套管约束下轴心受压杆件的屈曲分析[J]. 力学与实践, 2006, 28(5): 43―46. Shen Bo, Deng Changgen. Buckling analysis of an axially compressed strut constrained by a flexible sleeve [J]. Mechanics in Engineering, 2006, 28(5): 43―46. (in Chinese)
