余同希, 卢国兴. 材料与结构的能量吸收[M]. 北京: 化学工业出版社, 2006: 231-233. Yu Tongxi, Lu Guoxing. Energy asorption of structures and materials [M]. Beijing: Chemical Industry Press, 2006: 231-233. (in Chinese)
[2]
Timoshenko S P, Gere G M. Theory of elastic stability [D]. New York: McGraw-Hill, 1961.
[3]
Warren W E, Kraynik A M. Foam mechanics: The linear elastic response of two-dimensional spatially periodic cellular materials [J]. Mechanics of Materials, 1987, 6(1): 27-37.
[4]
Papka S D, Kyriakides S. In-plane compressive responseand crushing of honeycomb [J]. Journal of the Mechanics and Physics of Solids, 1994, 42(10): 1499- 1532.
[5]
Papka S D, Kyriakides S. In-plane crushing of a polycarbonate honeycomb [J]. International Journal of Solids and Structures, 1998, 35(3/4): 239-267.
[6]
Zhang J, Ashby M F. Buckling of honeycombs under in-plane biaxial stresses [J]. International Journal of Mechanical Sciences, 1992, 34(6): 491-509.
[7]
Gibson L J, Ashby M F. Cellular solids: Structure and properties [M]. 2nd ed. Cambridge: Cambridge University Press, 1997: 96-99.
[8]
Wang A J, McDowell D L. In-plane stiffness and yield strength of periodic metal honeycombs [J]. Journal of Engineering Materials and Technology, 2004, 126(2): 137-156.
[9]
Liu Ying, Zhang Xinchun. The influence of cell micro-topology on the in-plane dynamic crushing of honeycombs [J]. International Journal of Impact Engineering, 2009, 36(1): 98-109.
[10]
王博, 张雄, 徐胜利. 2D 周期蜂窝结构面内静动态压 缩力学行为研究[J]. 力学学报, 2009, 41(2): 274-281. Wang Bo, Zhang Xiong, Xu Shengli. Echanical beahavior of 2D periodic honeycombs under in-plane uniaxial compression [J]. Chinese Journal of Theoretical and Applied Mechanics, 2009, 41(2): 274-281. (in Chinese)
[11]
张新春, 刘颖, 章梓茂. 组合蜂窝材料面内冲击性能 的研究[J]. 工程力学, 2009, 26(6): 220-225. Zhang Xinchun, Liu Ying, Zhang Zimao. Research on dynamic properties of supercell honeycomb stuctures under in-plane impact loading [J]. Engineering Mechanics, 2009, 26(6): 220-225. (in Chinese) 浏览
[12]
Lu Lixin, Sun Yaping, Wang Zhiwei. Critical buckling load of paper honeycomb under out-of-plane pressure [J]. Packaging Technology and Science, 2005, 18(3): 141- 150.
[13]
王冬梅. 纸蜂窝压缩临界应力经验评估[J]. 包装工程, 2007, 28(7): 14-15. Wang Dongmei. Critical compression stress evaluation for paper honeycombs [J]. Packaging Engineering, 2007, 28(7): 14-15. (in Chinese)
[14]
Wang Dongmei. Out-of-plane compressive properties of hexagonal paper honeycombs [J]. Chinese Journal of Mechanical Engineering, 2007, 20(2): 115-119.
[15]
王冬梅, 王志伟. 纸蜂窝压缩密实化应变评估[J]. 机 械工程学报, 2009, 45(5): 285-289. Wang Dongmei, Wang Zhiwei. Evaluation of compressive densification strain of paper honeycombs [J]. Chinese Journal of Mechanical Engineering, 2009, 45(5): 285-289. (in Chinese)
[16]
E Yuping, Wang Zhiwei. Plateau stress of paper honeycomb as response to various relative humidities [J]. Packaging Technology and Science, 2010, 23(4): 203- 216.
[17]
计宏伟, 徐革玲, 李俊超, 邵文泉, 王怀文. 蜂窝纸板 侧压强度实验研究[J]. 包装工程, 2006, 27(6): 90-92. Ji Hongwei, Xu Geling, Li Junchao, Shao Wenquan, Wang Huaiwen. Experimental research on the edgewise compressive strength of honeycomb paperboard [J]. Packaging Engineering, 2006, 27(6): 90 - 92. (in Chinese)
[18]
邵文全, 李砚明, 孟宪文, 计宏伟. 脱胶缺陷对蜂窝纸 板侧压强度的影响[J]. 包装工程, 2008, 29(12): 59-61. Shao Wenquan, Li Yanming, Meng Xianwen, Ji Hongwei. Influence of the unglued defect on edgewise compressive strength of honeycomb paperboard [J]. Packaging Engineering, 2008, 29(12): 59-61. (in Chinese)
[19]
McFarland R K. Hexagonal cell structures under post-buckling axial load [J]. AIAA Journal, 1963, 1(6): 1380-1385.
[20]
Wierzbicki T. Crushing analysis of metal honeycombs [J]. International Journal of Impact Engineering, 1983, 1(2): 157-174.
[21]
Wierzbicki T, Abramowitz W. On the crushing mechanism of thin-walled structures [J]. Journal of Applied Mechanics, 1983, 50(4a): 727-734.
[22]
中华人民共和国机械行业标准. JB/T6544-93 塑料拉伸 和弯曲弹性模量试验方法[S]. 北京: 机械工业出版社, 1993. Mechanical industry standard of the People’s Republic of China. JB/T6544-93 Test method of elastic modulus of drawing and buckling for plastics [S]. Beijing: Mechanical Industry Press, 1993. (in Chinese)
[23]
中华人民共和国国家标准. GB 1454-2005 夹层结构侧 压性能试验方法[S]. 北京: 中国标准出版社, 2005. National Standard of the People’s Republic of China. GB 1454-2005 Test method for edgewise compressive properties of sandwich constructions [S]. Beijing: China Standard Press, 2005. (in Chinese)
