(沈海涛),(郑水英),(李志海).基于弹簧支承的柴油机曲轴强度有限元分析[J].(机械强度),2007,29(1):161―164.Shen Haitao,Zheng Shuiying,Li Zhihai.Finite element analysis of strength of diesel engine crankshaft based on spring support [J].Journal of Mechanical Strength,2007,29(1):161―164.(in Chinese)
[2]
(徐中明),(牟笑静),(彭旭阳).基于有限元法的发动机曲轴静强度分析[J].(重庆大学学报),2008,31(9):977―981.Xu Zhongming,Mu Xiaojing,Peng Xuyang.Engine crankshaft static strength analysis based on the finite element method [J].Journal of Chongqing University,2008,31(9):977―981.(in Chinese)
[3]
(丁培杰),(吴昌华).柴油机曲轴计算方法发展的回顾、现状与展望[J].(内燃机工程),2003,24(3):74―79.Ding Peijie,Wu Changhua.The review & prospect of the development of computational methods of diesel engine crankshafts [J].Chinese Internal Combustion Engine Engineering,2003,24(3):74―79.(in Chinese)
[4]
(Drab C,Engl H,Haslinger J,et al.Dynamic simulation of crankshaft multibody systems [J].Multibody System Dynamics,2009,22(2):133―144.
[5]
(Yilmaz Y,Anlas G.An investigation of the effect of counterweight configuration on main bearing load and crankshaft bending stress [J].Advances in Engineering Software,2009,40(2):95―104.
[6]
(Montazersadgh F H,Fatemi A.Dynamic load and stress analysis of a crankshaft [R].Warrendale,PA:SAE International,2007.
[7]
(段树林),(王洪伟),(武占华).基于非线性多体动力学和有限元法的柴油机曲轴动态强度分析[J].(大连海事大学学报),2009,35(1):103―106.Duan Shulin,Wang Hongwei,Wu Zhanhua.A dynamic strength analysis of diesel crankshaft based on nonlinear multi-body dynamics and finite element method [J].Journal of Dalian Maritime University,2009,35(1):103―106.(in Chinese)
[8]
(郭磊),(郝志勇),(刘波),等.曲轴强度多体动力学与有限元子模型法仿真[J].(浙江大学学报(工学版),2009,43(9):1638―1643.Guo Lei,Hao Zhiyong,Liu Bo,et al.Multi-body dynamics and finite element method co-simulation for crankshaft dynamical strength analysis [J].Journal of Zhejiang University (Engineering Science),2009,43(9):1638―1643.(in Chinese)
[9]
(朱永梅),(刘艳梨).发动机曲轴轴系多柔体动力学仿真及应力应变分析[J].(江苏科技大学学报(自然科学版),2009,23(4):325―330.Zhu Yongmei,Liu Yanli.Dynamics and stress & strain analysis of engine flexible crankshaft [J].Journal of Jiangsu University of Science and Technology (Natural Science Edition),2009,23(4):325―330.(in Chinese)
[10]
(周昌令),(方晓庆),(苏先樾).Ht120点焊机器人柔性臂动力学和强度分析[J].(工程力学),2004,21(5):11―15.Zhou Changling,Fang Xiaoqing,Sun Xianyue.Dynamic analysis and strength of a flexible robot manipulator [J].Engineering Mechanics,2004,21(5):11―15.(in Chinese)
[11]
(Shabana A A.Definition of the slopes and the finite element absolute nodal coordinate formulation [J].Multibody System Dynamics,1997,1(3):339―348.
[12]
(田强),(张云清),(陈立平),等.柔性多体系统动力学绝对节点坐标方法研究进展[J].(力学进展),2010,40(2):189―202.Tian Qiang,Zhang Yunqing,Chen Liping,et al.Advances in the absolute nodal coordinate method for the flexible multibody dynamics [J].Advances in Mechanics,2010,40(2):189―202.(in Chinese)
[13]
(Yu L,Zhao Z,Tang J,et al.Integration of absolute nodal elements into multibody system [J].Nonlinear Dynamics,2010,62(4):931―943.
[14]
(Kübler L,Eberhard P,Geisler J.Flexible multibody systems with large deformations and nonlinear structural damping using absolute nodal coordinates [J].Nonlinear Dynamics,2003,34(1):31―52.
[15]
(Schenk O,G？rtner K,Fichtner W,et al.Pardiso:A high-performance serial and parallel sparse linear solver in semiconductor device simulation [J].Future Generation Computer Systems,2001,18(1):69―78.
[16]
(González F,Luaces A,Lugris U,et al.Non-intrusive parallelization of multibody system dynamic simulations [J].Computational Mechanics,2009,44(4):493―504.
[17]
(Bathe K J.Finite element procedures [M].Englewood Cliffs,NJ:Prentice Hall,1996.
