徐乐江. 板带冷连轧机板形控制与机型选择[M]. 北京: 冶金工业出版社, 2007: 100―113Xu Lejiang. Flatness control in cold strip rolling and mill type selection [M]. Beijing: Metallurgical Industry Press, 2007: 100―113(in Chinese)
[2]
Carlstedt A G, Keijser O. Modern approach to flatness measurement and control in cold rolling [J]. Iron and Steel Engineer, 1991, 68(4): 34―37.
[3]
张清东, 陈先霖, 何安瑞, 等. 冷轧宽带钢板形检测与自动控制[J]. 钢铁, 1999, 34(10): 69―72.Zhang Qingdong, Chen Xianlin, He Anrui,et al. Automatic measurement and control of flatness of wide cold rolled steel strip [J]. Iron and Steel, 1999, 34(10): 69―72. (in Chinese)
[4]
周莲莲, 郑志刚, 白振华. 板带轧机板形检测设备系统误差综合补偿技术的开发[J]. (燕山大学学报), 2009, 33(3): 220―223.Zhou Lianlian, Zheng Zhigang, Bai Zhenhua. Development of general compensation technology about system error for strip mill shape detection equipment [J]. Journal of Yanshan University, 2009, 33(3): 220―223. (in Chinese)
[5]
王向丽, 李谋谓, 张少军. 测张式板形仪分段辊区域宽度对板形检测精度的影响[J]. (冶金自动化), 2010, 34(2): 50―54.Wang Xiangli, Li Mouwei, Zhang Shaojun. Analysis on effect of segmented roll width to shape detection precision in tension measuring type shapemeter [J]. Metallurgical Industry Automation, 2010, 34(2): 50―54. (in Chinese)
[6]
王鹏飞, 张殿华, 刘佳伟, 王军生. 变包角板形测量值计算模型[J]. (钢铁研究学报), 2010, 21(1): 57―60.Wang Pengfei, Zhang Dianhua, Liu Jiawei, Wang Junsheng. A varying wrap angle calculation model for flatness measurement [J]. Journal of Iron and Steel Research, 2010, 21(1): 57―60. (in Chinese)
[7]
Wolfgang B, Reinhard S, Willi W, Hermann Josef K. Flatness control of cold rolled strip by stress and temperature measurements [J]. Stahl Eisen, 1977, 97(4): 151―154.
[8]
Liu Jiawei, Zhang Dianhua, Wang Junsheng, Wang Pengfei. Defection compensation model for flatness measuring roll [J]. Journal of Iron and Steel Research, 2010, 17(12): 35―37.
[9]
王向丽, 李谋谓, 张少军. 分段辊测张式板形仪性能及发展趋势研究[J]. (冶金自动化), 2008, 32(3): 39―42.Wang Xiangli, Li Mouwei, Zhang Shaojun. Research on performance and perspective of tension measuring type shape meter with segmented rolls [J]. Metallurgical Industry Automation, 2008, 32(3): 39―42. (in Chinese)
[10]
赵小燕, 张朝晖, 迟健男, 孙一康. 基于张力测量的板形检测技术[J]. (制造业自动化), 2007, 29(3): 90―92.Zhao Xiaoyan, Zhang Zhaohui, Chi Jiannan, Sun Yikang. Application of tension meter device in the strip shape measurement [J]. Manufacturing Automation, 2007, 29(3): 90―92. (in Chinese)
[11]
庞玉华, 钟春生, 王经涛, 罗子健. 轧钢板形检测仪研究动向[J]. (上海金属), 2001, 23(2): 10―13.Pang Yuhua, Zhong Chunsheng, Wang Jingtao, Luo Zijian. The research tendency of strip flatness measuring apparatus used in steel rolling [J]. Shanghai Metals, 2001, 23(2): 10―13. (in Chinese)
[12]
杨荃, 陈先霖, 欧阳金明. 冷轧机板形在线连续检测问题研究[J]. (钢铁研究), 1993, 23(2): 20―22.Yang Quan, Chen Xianlin, Ouyang Jinming. On-line continuous measurement on profile of cold rolled strip [J]. Research on Iron and Steel, 1993, 23(2): 20―22. (in Chinese)
[13]
杨景明, 王洪瑞, 方一鸣. 分段式板形检测仪[J]. (电子测量与仪器学报), 1996, 10(3): 60―63.Yang Jingming, Wang Hongrui, Fang Yiming. The shape measuring meter of sectional type [J]. Journal of Electronic Measurement and Instrument, 1996, 10(3): 60―63. (in Chinese)
[14]
周晓敏, 张清东, 王长松. 西门子平坦度检测系统在冷轧中的应用[J]. (上海金属), 2003, 25(2): 37―40.Zhou Xiaomin, Zhang Qingdong, Wang Changsong. Application of SIMENS flatness measurement system to cold rolling mill [J]. Shanghai Metals, 2003, 25(2): 37―40. (in Chinese)
[15]
刘浩. ABB板形测量系统在宝钢1800mm冷连轧机组的应用[J]. (冶金自动化), 2006, 30(1): 61―62.Liu Hao. Application of ABB shape measurement system in Baosteel 1800mm cold rolling train [J]. Metallurgical Industry Automation, 2006, 30(1): 61―62. (in Chinese)
[16]
杨荃, 张清东, 陈先霖. 冷轧带钢翘曲形状分析与浪形函数[J]. 钢铁, 1993, 28(6): 41―45.Yang Quan, Zhang Qingdong, Chen Xianlin. Study on the buckled shape of cold rolled strip and the wave function [J]. Iron and Steel, 1993, 28(6): 41―45. (in Chinese)
[17]
张清东, 陈先霖, 王长松, 杨荃. 冷轧宽带钢横向内应力分布的实测与计算[J]. (北京科技大学学报), 1994, 16(增刊2): 81―85.Zhang Qingdong, Chen Xianlin, Wang Changsong, Yang Quan. Measurement and calculation of transversal internal stress distribution in the off-line cold rolled strip [J]. Journal of University of Science and Technology Beijing, 1994, 16(Suppl 2): 81―85. (in Chinese)
[18]
张清东, 陈先霖, 徐金梧. 板形缺陷模式识别方法的研究[J]. 钢铁, 1996, 31(增刊1): 57―60.Zhang Qingdong, Chen Xianlin, Xu Jinwu. Method of flatness defect pattern recognition [J]. Iron and Steel, 1996, 31(Suppl 1): 57―60. (in Chinese)
[19]
张清东, 陈先霖, 徐金梧. 板形模式识别的模糊分类方法[J]. (北京科技大学学报), 1995, 17(1): 68―71.Zhang Qingdong, Chen Xianlin, Xu Jinwu. Pattern recognition of flatness defect by fuzzy method [J]. Journal of University of Science and Technology Beijing, 1995, 17(1): 68―71. (in Chinese)
[20]
戴杰涛, 张清东. 冷轧薄板中浪板形缺陷的屈曲及后屈曲理论与轧制试验研究[J]. (机械工程学报), 2011, 47(2): 44―50.Dai Jietao, Zhang Qingdong. Analysis and experiment on central buckling and post buckling of thin cold-rolled sheet [J]. Journal of Mechanical Engineering, 2011, 47(2): 44―50. (in Chinese)
