全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用：99美元
投递稿件

查看量下载量

相关文章

更多...
工程力学  2015 

薄宽带钢任意位置局部浪形屈曲变形行为分析

DOI: 10.6052/j.issn.1000-4750.2014.05.S028, PP. 33-38

Keywords: 薄宽带钢,任意位置,局部浪形,弹性约束,屈曲,解析法,有限元法

Full-Text   Cite this paper   Add to My Lib

Abstract:

针对薄宽带钢生产过程中出现的任意位置局部型瓢曲浪形缺陷,考虑平直段边界弹性约束作用及其所储存的应变能,应用能量变分法建立了任意位置局部非均匀载荷作用下屈曲变形的解析计算模型,获得了屈曲临界载荷的表达式,并基于驻值势能原理对屈曲变形区域进行搜索求解,得到了临界条件。应用ABAQUS有限元对任意位置局部浪形进行仿真计算,获得了屈曲模态及临界条件,验证了屈曲解析计算模型的准确性。在此基础上,分析了屈曲临界条件与弹性约束系数、屈曲区域中心距带钢自由边垂直距离、非均匀载荷半宽以及平均张应力之间的关系,并指出带钢不产生屈曲区域超出带钢板宽的任意位置局部浪形时,相同初始条件下任意位置的局部浪形屈曲临界条件计算结果都相同。

 References

[1]  张清东, 刘赟赟, 周晓敏, 等. 高温带钢的局部宽度内压屈曲及后屈曲分析[J]. 机械工程学报, 2005, 41(3): 102―106.
[2]  Zhang Qingdong, Liu Yunyun, Zhou Xiaomin, et al. Part width compressive buckling and post buckling analysis of steel strip under high temperature [J]. Chinese Journal of Mechanical Engineering, 2005, 41(3): 102―106. (in Chinese)
[3]  卿伟杰, 杨荃. 冷轧带钢整体和局部屈曲及后屈曲的有限元分析[J]. 北京科技大学学报, 2000, 22(4): 377―380.
[4]  Qing Weijie, Yang Quan. Study on cold rolled strip global and local buckling, post-buckling using the finite elment method [J]. Journal of University of Science and Technology Beijing, 2000, 22(4): 377―380. (in Chinese)
[5]  戴杰涛, 张清东, 秦剑. 薄宽冷轧带钢局部板形屈曲行为解析研究[J]. 工程力学, 2011, 28(10): 236―242.
[6]  Dai Jietao, Zhang Qingdong, Qin Jian. Analysis of local buckling for thin cold-rolled strip [J]. Engineering Mechanics, 2011, 28(10): 236―242. (in Chinese)
[7]  张清东, 卢兴福, 张晓峰, 等. 冷轧薄宽带钢局部型中浪瓢曲变形行为研究[J]. 工程力学, 2013, 30(11): 298―304.
[8]  Zhang Qingdong, Lu Xingfu, Zhang Xiaofeng, et al. Research on local central buckling deformation behavior of thin cold-rolled strip [J]. Engineering Mechanics, 2013, 30(11): 298―304. (in Chinese)
[9]  Qiao P, Zou G. Local buckling of elastically restrained fiber-reinforced plastic plates and its application to box section [J]. Journal of Engineering Mechanics, 2002, 128(12): 1324―1330.
[10]  Qiao P, Huo X. Explicit local buckling analysis of rotationally restrained orthotropic plates under uniform shear [J]. Composite Structures, 2011, 93(11): 2785―2794.
[11]  聂建国, 唐亮. 基于弹性扭转约束边界的波形钢板整体剪切屈曲分析[J]. 工程力学, 2008, 25(3): 1―7.
[12]  Nie Jianguo, Tang Liang. Global shear buckling of corrugated steel plates with edges elastically restrained against rotation [J]. Engineering Mechanics, 2008, 25(3): 1―7. (in Chinese)
[13]  毛佳, 江振宇, 陈广南, 等. 弹性支承上边界转动约束矩形板屈曲分析[J]. 工程力学, 2010, 27(12): 59―63, 76.
[14]  Mao Jia, Jiang Zhenyu, Chen Guangnan, et al. Elastic buckling analysis of rectangle plate with rotation restraint on elastic support [J]. Engineering Mechanics, 2010, 27(12): 59―63, 76. (in Chinese)
[15]  刘沐宇, 陈齐风, 张强. 弹性转动边界约束的组合梁腹板剪切屈曲分析[J]. 华中科技大学学报(自然科学版), 2014, 42(1): 84―88.
[16]  Liu Muyu, Chen Qifeng, Zhang Qiang. Wed plate buckling analysis in steel-concrete composite girder considering elastic rotational restraint boundary under shear [J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2014, 42(1): 84―88. (in Chinese)
[17]  Fisher F D, Rammerstorfer F G, Friedl N, Wieser W. Buckling phenomena related to rolling and leveling of sheet metal [J]. International Journal of Mechanical Sciences, 1999, 42(10): 1887―1910.
[18]  Tarnopolskaya T, Gates D J. Analysis of the effect of strip buckling on stability of strip lateral motion with application to cold rolling of steel [J]. Journal of Dynamic Systems Measurement and Control, 2008, 130(1): 1―7.
[19]  边宇虹, 刘宏民. 求解带材轧后大挠度屈曲变形的一个通用方法[J]. 机械工程学报, 1994, 30(增刊): 21―27．
[20]  Bian Yuhong, Liu Hongmin. Universal method analysing the large deflection buckling deformation of rolled strip [J]. Chinese Journal of Mechanical Engineering, 1994, 30(Suppl): 21―27. (in Chinese)
[21]  杨荃, 陈先霖. 轧制带材的瓢曲生成路径[J]. 北京科技大学学报, 1994, 16(1): 53―57．
[22]  Yang Quan, Chen Xianlin. The deforming route of buckled waves of rolled strip [J]. Journal of University of Science and Technology Beijing, 1994, 16(1): 53―57. (in Chinese)
[23]  Komori K. Analysis of herring-bone mechanism in sheet rolling [J]. Journal of Materials Processing Technology, 1996, 60(1/2/3/4): 377―380.
[24]  白振华, 李东兴, 连家创, 等. 局部浪形对冷轧钢卷起筋的影响[J]. 机械工程学报, 2006, 42(9): 229―232.
[25]  Bai Zhenhua, Li Dongxing, Lian Jiachuang, et al. Influence of local shape wave on ribbing of cold-rolled coil [J]. Chinese Journal of Mechanical Engineering, 2006, 42(9): 229―232. (in Chinese)
[26]  梁靖波, 韦爱凤, 胡新丽. 刚性介质接触条件下钢板的局部屈曲分析[J]. 科学技术与工程, 2009, 9(7): 1778―1781．
[27]  Liang Jingbo, Wei Aifeng, Hu Xinli. Analysis of local buckling of steel plate in contact with rigid medium [J]. Science Technology and Engineering, 2009, 9(7): 1778―1781. (in Chinese)

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133