带脱层的复合材料层板的屈曲分析
, PP. 149-158
Keywords: 复合材料层板,脱层,屈曲分析,接触分析
Abstract:
用基于Mindlin板理论的有限元方法进行了带脱层损伤的复合材料层板的屈曲载荷分析。为了获得物理上可能的屈曲模态,即避免上下脱层的相互贯穿,在接触区域引入一些假想弹簧,并给出了这些假想弹簧刚度系数的计算公式和接触计算的迭代格式,通过这些弹簧对原始刚度矩阵进行修正可以有效地求解屈曲载荷特征值分析中的接触问题。数值计算结果表明了本算法的有效性和引入接触分析对这类屈曲分析的重要性。同时,还对脱层的大小、形状、位置和脱层的纤维铺层方向对屈曲载荷的影响进行了研究。
| [1] | Chai H.Babcock C D.Knauss W G One dimensional modelling of failure int laminated plates by delamination buckling 1981
|
| [2] | Simites G J.Sallam S.Yin W L Effect of delamination of axially loaded homogeneous laminated plates 1985
|
| [3] | Kardomateas G A.Schmueser D W Buckling and postbuckling of delaminated composites under compressive loads including transverse shear effects 1988
|
| [4] | Marshall R D.Sandirff P E.Lauraitis K N Buckling of a damaged sublaminate in an impacted laminate 1988
|
| [5] | Chen H P Shear deformation theory for compressive delamination buckling and growth 1991
|
| [6] | Lee J.Grdal Z.Griffin Jr O H Layer-wise approach for the bifurcation problem in laminated composites with delaminations 1993
|
| [7] | Chattopadhyay A.Gu H New higher order plate theory in modeling delamination buckling of composite laminates 1994
|
| [8] | Chai H.Babcock C Two-dimensional modelling of compressive failure in delaminated laminates 1985
|
| [9] | Chai H Buckling and post-buckling behavior of elliptical plates: Part I-Analysis 1990
|
| [10] | Chai H Buckling and post-buckling behavior of elliptical plates: Part II-Results 1990
|
| [11] | Peck S O.Springer G S The behavior of delaminations in composite plates analytical and experimental results 1991
|
| [12] | Yeh M K.Tan C M Buckling of elliptically delaminated composite plates 1994
|
| [13] | Suemasu H.Gozu K.Hayashi K Compressive buckling of rectangular composite plates with a free-edge delamination 1995
|
| [14] | Whitcomb J D Analysis of a laminate with a postbuckled embedded delamination including contact effects 1992
|
| [15] | Corr R B.Jennings A A simultaneous iteration algorithm for symmetric eigenvalue problems 1976
|
Full-Text
