金属硫化物及石墨填充PTFE复合材料的摩擦磨损性能研究
, PP. 58-63
Keywords: PTFE,复合材料,金属硫化物及石墨,摩擦磨损,摩擦表面
Abstract:
利用MHK-500型环-块磨损试验机,对MoS2、CuS、PbS及石墨(添加量均为30vol%)填充的聚四氟乙烯(PTFE)复合材料在干摩擦条件下与GCr15轴承钢对摩时的摩擦磨损性能进行了较为系统的研究,并利用扫描电子显微镜(SEM)和光学显微镜对PTFE复合材料的磨屑和摩擦磨损表面进行了观察。结果表明,添加石墨降低了PTFE的摩擦系数,而添加MoS2、CuS及PbS则增大了PTFE的摩擦系数;同时,添加MoS2、CuS、PbS及石墨均可将PTFE的磨损量降低2个数量级,其中以PbS的减磨效果为最好,而MoS2的减磨效果则最差。
| [1] | Bahadur S.Gong D The action of fillers in the modification of the tribological behavior of polymers 1992
|
| [2] | Gong D.Xue Q.Wang H Study of the wear of filled PTFE 1989
|
| [3] | Gong D.Zhang B.Xue Q.Wang H Investigation of adhesion wear of filled PTFE by ESCA 1990
|
| [4] | Lancaster J K Composites for increased wear resistance: current achievements and future prospects 1985
|
| [5] | Tanaka K.Kawakami S Effects of various fillers on the friction and wear of PTFE-based composites 1982
|
| [6] | Tanaka K Transfer of semicrystalline polymers sliding against a smooth steel surface 1982
|
| [7] | Bahadur S.Tabor D The wear of filled PTFE 1984
|
| [8] | Briscoe B J.Tabor D The sliding wear of polymers 1980
|
Full-Text
