Wang Rui, Wan Yizao, He Fang, et al. Nickel-plated carbon fiber continuous production process and its shielding composites [J]. Acta Materiae Compositae Sinica, 2010, 27(5): 19-23.
[3]
Hadjieva M, Stoykov R, Filipova T, et al. Composite salt-hydrate concrete system for building energy storage [J]. Renewable Energy, 2000, 19(1): 111-115.
[4]
Liu J, Tian Y L, Chen Y J, et al. A surface treatment technique of electrochemical oxidation to simultaneously improve the interfacial bonding strength and the tensile strength of PAN-based carbon fibers [J]. Materials Chemistry and Physics, 2010, 122(2): 548-555.
[5]
Dai Z S, Zhang B Y, Shi F H, et al. Effect of heat treatment on carbon fiber surface properties and fibers/epoxy interfacial adhesion [J]. Applied Surface Science, 2011, 257(20): 8457-8461.
[6]
Li J, Cai C L. The carbon fiber surface treatment and addition of PA6 on tensile properties of ABS composites [J]. Current Applied Physics, 2011, 11(1): 50-54.
[7]
Montes-Moran M A, van Hattum F W J, Nunes J P, et al. A study of the effect of plasma treatment on the interfacial properties of carbon fibre-thermoplastic composites [J]. Carbon, 2005, 43(8): 1795-1799.
[8]
Smith N A, Antoun G G, Ellis A B, et al. Improved adhesion between nickel-titanium shape memory alloy and a polymer matrix via silane coupling agents [J]. Composites: Part A, 2004, 35(11): 1307-1312.
[9]
Choi M H, Jeon B H, Chung I J. The effect of coupling agent on electrical and mechanical properties of carbon fiber/phenolic resin composites [J]. Polymer, 2000, 41(9): 3243-3252.
[10]
Zhang L Y, Ma J. Effect of coupling agent on mechanical properties of hollow carbon microsphere/phenolic resin syntactic foam [J]. Composites Science and Technology, 2010, 70(8): 1265-1271.
Zhang Shihua, Chen Guang, Cui Cong, et al. Effect of silicon coupling agent treatment of glass fiber on mechanical properties of GFRMCN [J]. Acta Materiae Compositae Sinica, 2006, 23(3): 31-36.
[13]
Varga C, Miskolczi N, Szakacs H, et al. Effects of industrial scale production on the chemical composition of novel coupling agents and its relationship to the mechanical properties of chopped glass fibre mat reinforced thermoset composites [J]. Materials and Design, 2011, 32(1): 12-20.
[14]
Myriam L,Khashayar S,Pierre G.Functionalisation of porous silica powders in a fluidised-bed reactor with glycidoxypropy-ltrimethoxysilane (GPTMS) and aminopropyltriethoxysilane (APTES) [J]. Chemical Engineering Research and Design, 2010, 88: 686-692.
[15]
Yang L X, Feng J, Zhang W G, et al. Experimental and computational study on hydrolysis and condensation kinetics of γ-glycidoxypropyltrimethoxy-silane (γ-GPS) [J]. Applied Surface Science, 2010, 257(3): 990-996.
[16]
Zhou W Y, Yu D M. Effect of coupling agents on the dielectric properties of aluminum particles reinforced epoxy resin composites [J]. Journal of Composite Materials, 2011, 45(19): 1981-1989.
[17]
汪爱明. 中间相沥青基碳纤维镀镍及吸波复合材料研究[D]. 北京: 北京化工大学, 2010.
[18]
Wang Aiming. Nickle plating of mesophase pitch-based carbon fibers and microwave-absorbing composite materials[D]. Beijing: Beijing University of Chemical Technology, 2010.
[19]
Minor-Perez E, Mendoza-Serna R, Mendez-Vivar J, et al. Preparation and characterization of multicomponent porous materials prepared by the sol-gel process [J]. Journal of Porous Materials, 2006, 13(1): 13-19.
[20]
Yang L X, Feng J, Zhang W G, et al. Film forming kinetics and reaction mechanism of γ-glycidoxypropyltrimethoxy-silane on low carbon steel surfaces[J]. Applied Surface Science, 2010, 256(22): 6787-6794.
[21]
Manfredo G. Drop shape visualization and contact angle measurement on curved surfaces [J]. Journal of Colloid and Interfaces Science, 2011, 364(1): 230-236.
[22]
Kelly A, Tyson W J. Tensile properties of fiber-reinforced metal: Copper/tungsten and copper/molybdenum [J]. J Mech Phys Solids, 1965, 13(6): 329-350.
Wu Haisheng, Sun Zhijie, Jia Jingjing, et al. Experimental study on the interfacial bonding properties of high-performance organic fibers in single fiber fragmentation test[J]. Acta Materiae Compositae Sinica, 2010, 27(4): 59-63.
