Ding Xingeng, Ge Manzhen, Yang Hui. Preparation and properties of laminated Al2O3/ZTA [J]. Bulletin of the Chinese Ceramic Society, 2000, 19(1): 50-52.
Zhao Zhe, Gong Jianghong, Miao Hezhuo, et al. Crack-resistance curve behavior of TiC particle dispersed Al2O3 composites [J]. Journal of the Chinese Ceramic Society, 2000, 28(4): 371-375.
[7]
Yang X F, Ze X B, Wang H Y. Wear properties and microstructures of alumina matrix composite ceramics used for drawing dies [J]. Ceramics International, 2009, 34(12): 3495-3502.
Yang Xuefeng, Wang Hui, Ze Xiangbo, et al. Research on tribological properties of internal surface on Al2O3/TiC/Mo/Ni composite ceramic wire drawing die [J]. Rare Metal Materials and Engineering, 2009, 38(2): 164-167.
Cao Tongkun, Deng Jianxin, Sun Junlong. Study on self-lubricating Al2O3/TiC/CaF2 ceramic composite [J]. Journal of Materials Engineering, 2005(3): 37-42.
[14]
Deng J X, Cao T K, Ding Z L, et al. Tribological behaviors of hot-pressed Al2O3/TiC ceramic composites with the additions of CaF2 solid lubricants [J]. Journal of the European Ceramic Society, 2006, 8(26): 1317-1323.
Cao Tongkun, Gao Wei, Wang Xiaona. Study on cutting performance and wearing mechanism of Al2O3/TiC/CaF2 self-lubricating ceramic tool [J]. Journal of Qingdao University of Science and Technology: Natural Science Edition, 2008(2): 150-153.
[17]
Wang G F, Lu Z, Wang C W, et al. Fabrication and mechanical properties of Al2O3-Si3N4/ZrO2-Al2O3 laminated composites [J]. Powder Technology, 2011, 214(2): 188-193.
Qian Xiaoqian, Ge Manzhen, Wu Yibing, et al. Reinforcement mechanisms and optimum design of laminated ceramic composites [J]. Journal of Inorganic Material, 1999, 14(4): 520-526.
[20]
Tarlazzi A, Roncari E, Pinasco P, et al. Tribological behavior of Al2O3/ZrO2-ZrO3 laminated composites [J]. Wear, 2000, 244(1/2): 29-40.
[21]
de Portu G, Micele L, Prandstraller D, et al. Abrasive wear in ceramic laminated composites [J]. Wear, 2006, 260(9/10): 1104-1111.
[22]
Zeng Y P, Jiang D L. Fabrication and properties of laminated Al2O3/TiC composites [J]. Ceramics International, 2001, 27(5): 597-602.
Xiao Guangchun, Xu Chonghai, Fang Bin, et al. Research on the engineering performance of ceramic die materials [J]. Rare Metal Materials and Engineering, 2007, 36(1): 770-773.
Wen Shizhu, Huang Ping. Principles of tribology [M]. 3rd edition. Beijing: Tsinghua University Press, 2009: 259-260.
[27]
Suh M S, Chae Y H, Kim S S. Friction and wear behavior of structural ceramics sliding against zirconia [J].Wear, 2008, 264(9/10): 800-806.
[28]
Shi G D, Wua Z J, Wang Z, et al. The mechanical properties and microstructure of the bionic alloy-ceramic laminated composite [J]. Materials and Design, 2012, 33: 300-305.
[29]
Liu N, Shi M, Xu Y D, et al. Effect of starting powders size on the Al2O3-TiC composites [J]. International Journal of Refractory Metals & Hard Materials, 2004, 22(6): 265-269.
[30]
Tai Q, Mocellin A. Review: High temperature deformation of Al2O3 based ceramic particle or whisker composites [J].Ceramics International, 1999, 25(5): 395-408.
Zhao Xingzhong, Luo Hong, Liu Jiajun, et al. A study on the tribological characteristics of Ti (CN)-Al2O3/metal pairs under dry condition [J]. Journal of the Chinese Ceramic Society, 1996, 24(5): 139-140.
[33]
Sullivan J L, Shi B G, Saied S O. Microtribological studies of two-phase Al2O3-TiC ceramic at low contact pressure [J].Tribology International, 2005, 38(11/12): 987-994.
Qi Ya’e, Zhang Yongsheng, Hu Litian. Microstructure and bending strength of Al2O3/Al2O3-ZrO2(3Y) laminated nanocomposites [J]. Journal of the Chinese Ceramic Society, 2011, 39(2): 228-232.
Chen Bei, Ding Peidao, Cheng Chuan. Relationship between processing and mechanical property of Al2O3/ZrO2 laminated ceramics [J]. Bulletin of the Chinese Ceramic Society, 2004(6): 27-29.
