Shahinpoor M, Kim K J.Novel ionic polymer-metal composites equipped with physically loaded particulate electrodes as biomimetic sensors, actuators and artificial muscles [J].Sensors and Actuators A, 2002, 96(2/3): 125-132.
[2]
Jung K, Nam J, Choi H.Investigations on actuation characteristics of IPMC artificial muscle actuator [J].Sensors and Actuators A, 2003, 107(2): 183-192.
[3]
Oguro K, Kawami Y, Takenaka H.Bending of an ion-conducting polymer film-electrode composites by an electric stimulus at low voltage [J].Journal of Micromachine Society, 1992, 5: 27-32.
[4]
Shahinpoor M, Kim K J.The effect of surface-electrode resistance on the performance of ionic polymer-metal composite (IPMC) artificial muscles [J].Smart Materials and Structures, 2000, 9(4): 543-551.
[5]
Nemat-Nasser S, Li J Y.Electromechanical response of ionic polymer-metal composites [J].Journal of Applied Physics, 2000, 87(7): 61-68.
[6]
Shahinpoor M, Kim K J.Ionic polymer-metal composites Ⅰ : Fundamentals [J].Smart Materials and Structures, 2001, 10(4): 819-833.
[7]
Kim K J, Shahinpoor M.Ionic polymer-metal composites Ⅱ : Manufacturing techniques [J].Smart Materials and Structures, 2003, 12(1): 65-79.
[8]
Bonomo C, Fortuna L, Giannone P, Graziani S.A method to characterize the deformation of an IPMC sensing membrane [J].Sensors and Actuators A, 2005, 123-124(23): 146-154.
[9]
Shahinpoor M, Kim K J.Design, development and testing of a multi-fingered heart compression/assist device equipped with IPMC artificial muscles [C]//Bar-Cohen Y.Smart Structures and Materials 2001: Electroactive Polymer Actuators and Devices. Newport Beach, CA, USA: Proceedings of SPIE, 2001, 4329: 411-420.
[10]
Shahinpoor M, Kim K J.Ionic polymer-metal composites Ⅳ :Industrial and medical applications [J].Smart Materials and Structures, 2005, 14: 197-214.
[11]
Kim K J, Shahinpoor M.Ionic polymer-metal composites Ⅲ: Modeling and simulation as biomimetic sensors, actuators, transducers and artificial muscles [J].Smart Materials and Structures, 2004, 13(6): 1362-1388.
[12]
Tamagawa H, Nogata F, Watanabe T, Abe A, Yagasaki K, Jin J Y.Influence of metal plating treatment on the electric response of Nafion [J].Journal of Materials Science, 2003, 38(5): 1039-1044.
[13]
Tamagawa H, Goto S, T Sugiyama.Bending influence of metal plating treatment on the electric response of Nafion direction of Ag-plated IPMC containing immobile anions and/or cations [J].Composites Science and Technology, 2008, 68(15/16): 3412-3417.
[14]
卞 侃, 熊 克, 陈 琪, 刘 刚, 王帮峰.银基离子聚合物金属复合材料的制备和驱动特性 [J].材料研究学报, 2010, 24(5): 520-524. Bian Kan, Xiong Ke, Chen Qi, Liu Gang, Wang Bangfeng.Manufacture and actuating characteristic of ionic polymer metal composites with silver electrode [J].Chinese Journal of Materials Research, 2010, 24(5): 520-524.
[15]
卞 侃, 熊 克, 刘 刚, 陈 琪, 王帮峰.铂型离子聚合物金属复合材料的制备及驱动位移测试 [J].复合材料学报, 2011, 28(3): 115-120. Bian Kan, Xiong Ke, Liu Gang, Chen Qi, Wang Bangfeng.Preparation and dynamic displacement testing of ionic polymer metal composites [J].Acta Materiae Compositae Sinica, 2011, 28(3): 115-120.
[16]
中华人民共和国国家质量监督检验检疫总局.GB/T 6673-2001 塑料薄膜和薄片长度和宽度的测定[S].北京: 中国标准出版社, 2001. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China.GB/T 6673-2001 Determination of length and width of plastics film and sheeting[S].Beijing: China Standards Press, 2001.
[17]
American Society for Testing and Materials. ASTM D 882-2001 Standard test method for tensile properties of thin plastic sheeting [S].American: ASTM International, 2001.
