马骁飞, 于九皋. 甲酰胺塑化热塑性淀粉的性能研究[J].高分子学报, 2004(2): 240-244. Ma Xiaofei, Yu Jiuhao. Studies on the properties of formamide plasticized-thermoplastic starch[J]. Acta Polymerica Sinica, 2004(2):240-244.
[2]
姜闻博, 乔秀颖, 唐忠柱, 孙 康. 乙酰化淀粉的塑化和性能研究[J].高分子学报, 2006(1): 97-100. Jiang Wenbo, Qiao Xiuying, Tang Zhongzhu, Sun Kang. Preparation and properties of thermoplastic acetylated starch[J]. Acta Polymerica Sinica, 2006(1): 97-100.
[3]
于九皋, 郑华武, 张 捷, 高建平, 林 通. 淀粉与多元醇共混物性能的研究[J]. 天津大学学报: 自然科学与工程技术版, 1999, 32(2): 141-144. Yu Jiugao, Zheng Huawu, Zhang Jie, Gao Jianping, Lin Tong. Study on the properties of the blends of starch and polylols [J]. Journal of Tianjin University, 1999, 32(2): 141-144.
[4]
马骁飞, 于九皋. 纤维增强尿素和甲酰胺混合塑化热塑性淀粉[J]. 精细化工, 2004(5): 366-369. Ma Xiaofei, Yu Jiuhao. Microfibrils as reinforcement for thermoplastic starch plasticized with the mixture of formamide and glycerol [J].Fine Chemicals, 2004(5): 366-369.
[5]
李海东, 孙 朋, 程凤梅. 热塑性乙酰化淀粉/聚乳酸的性能及形态[J]. 复合材料学报, 2012, 29(6): 55-59. Li Haidong, Sun Peng, Cheng Fengmei. Performance and morphology of thermoplastic acetylated starch/poly (lactic acid)[J]. Acta Materiae Compositae Sinica, 2012, 29(6): 55-59.
[6]
曾广胜, 林瑞珍, 郑良杰,等.废纸浆增强玉米淀粉基复合材料的制备及其力学性能研究[J].功能材料学报, 2012, 16(43): 2218-2221. Zeng Guangsheng, Lin Ruizhen, Zheng Liangjie, et al. Preparation and performance of waste paper pulp reinforced cornstarch-based composites[J].Journal of Functional Materials, 2012, 16(43): 2218-2221.
[7]
林 路, 古 菊, 谢 东, 等. 改性淀粉/丁苯橡胶复合材料的制备及性能研究[J]. 复合材料学报, 2010, 27(2): 16-23. Lin Lu, Gu Ju, Xie Dong, et al. Preparation and performance of modified starch/styrene butadiene rubber composite[J]. Acta Materiae Compositae Sinica, 2010, 27(2): 16-23.
[8]
陈金周, 刘宏治, 李新法, 等. 全淀粉塑料流变性能的研究[J]. 包装工程, 2002(2): 1-4. Chen Jinzhou, Liu Hongzhi, Li Xinfa, et al. A study of rheological properties of full starch thermoplastics[J]. Packaging Engineering, 2002(2): 1-4.
[9]
Soest Van J J G, Borger D B. Structure and properties of compreddion-moulded thermoplastic starch materials from normal and high-amylose maize starches[J]. J Appl Polym Sci, 1997, 64: 631-644.
[10]
Soest Van J J G, Kortleve P M. The influence of maltodextrins on the structure and properties of compression-moulded starch plastic sheets[J]. J Appl Polym Sci, 1999, 74: 2207-2219.
[11]
Willett J L, Jasberg B K, Swanson C L. Rheology of thermoplastic starch: Effects of temperature, moisture content, and additives on melt viscosity [J]. Polym Eng Sci, 1995, 35(2): 202-210.
[12]
刘现峰, 王 苓, 于 磊. 工艺参数对淀粉挤出发泡的影响[J]. 现代塑料加工应用, 2007, 19(5): 35-38. Liu Xianfeng, Wang Ling, Yu Lei. Influence of process parameters on extruded starch foams[J]. Modern Plastics Prcessing and Application, 2007, 19(5): 35-38.
[13]
曾广胜, 林瑞珍, 郑良杰,等. AC/ZnO发泡剂系对植物纤维增强淀粉复合发泡材料性能的影响[J].功能材料学报, 2012, 16(43): 708-711. Zeng Guangsheng, Lin Ruizhen, Zheng Liangjie, et al. The effect of the mixed foming agent of azodicarbonamide and zinc oxide on ithe properties of foamed starch-based composite strengthened by plant-fiber[J]. Journal of Functional Materials, 2012, 16(43): 708-711.
