Chishti M, Wang C H, Thomson R S, et al. Experimental investigation of damage progression and strength of countersunk composite joints[J]. Composite Structures, 2012, 94: 865-873.
[2]
Chishti M, Wang C H, Thomson R S, et al. Numerical analysis of damage progression and strength of countersunk composite joints[J]. Composite Structures, 2012, 94: 643-653.
[3]
Sen F, Pakdil M, Saymen O, et al. Experimental failure analysis of mechanically fastened joints with clearance in composite laminates under preload[J].Mater Des, 2008, 29: 1159-1169.
[4]
张岐良, 曹增强. 复合材料螺接性能的影响因素研究[J].航空学报, 2012, 33(4): 755-762. Zhang Qiliang, Cao Zengqiang. Study on factors influencing the performance of composite bolted connections[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(4): 755-762.
[5]
Sayman O, Siyahkoc R, Sen F K, et al. Experiment determination of bearing strength in fiber reinforced laminated composite bolted joints under preload[J]. Compos, 2007, 26(10): 1051-1063.
[6]
Kelly G. Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints[J]. Compos Struct, 2006, 72(1): 119-29.
[7]
张 爽, 王 栋, 郦正能, 等. 复合材料层合板多钉连接结构累积损伤过程可视化仿真模拟[J].复合材料学报, 2006, 23(3): 135-140. Zhang Shuang, Wang Dong, Li Zhengneng, et al. Visual simulation of damage accumulation for composite multiple bolted joints[J]. Acta Materiae Compositae Sinica, 2006, 23(3): 135-140.
[8]
张纪奎, 马志阳, 程小全. 复合材料三钉单搭连接有限元模拟与钉载分布[J]. 复合材料学报, 2012, 29(3): 179-183. Zhang Jikui, Ma Zhiyang, Cheng Xiaoquan. Finite element model and load distribution analysis for three-bolted single-lap composite joints[J]. Acta Materiae Compositae Sinica, 2012, 29 (3): 179-183.
[9]
McCarthy C T, McCarthy M A, Lawlor V P. Progressive damage analysis of multi-bolt composite joints with variable bolt-hole clearances[J].Composites: Part B, 2005, 36: 290-305.
[10]
Hashin Z. Failure criteria for unidirectional fibre composites[J]. Appl Mech, 1980, 47: 329-334.
[11]
Tan S C. A progressive failure model for composite laminates containing openings[J]. Compos Mater, 1991, 25: 556-577.
[12]
王艳料, 王富生, 朱振涛, 等. 复合材料机械连接件的三维累积损伤研究素[J].机械强度, 2010, 32(5): 814-818. Wang Yanliao, Wang Fusheng, Zhu Zhentao, et al. 3D numerical calculation of damage accumulation for composite single bolted joint[J]. Jouranl of Mechanical Strength, 2010, 32(5): 814-818.
[13]
lvaro O, Carlos S. On the prediction of bolted single-lap composite joints[J]. Composite Structures, 2012, 94: 2110-2117.
[14]
Guo S, Morishima R. Numerical analysis and experiment of composite sandwich T-joints subjected to pulling load[J]. Composite Structures, 2011, 94(1): 229-238.
