程小全, 赵 龙, 张怡宁. 缝合复合材料可用性——简单层合板的基本性能[J]. 北京航空航天大学学报, 2003, 29(11):1001-1005. Cheng Xiaoquan, Zhao Long, Zhang Yining. Properties of stitched composite laminates-the principal properties of simple laminates [J].Journal of Beijing University of Aeronautics and Astronautics, 2003, 29(11): 1001-1005.
[2]
Aymerich F, Pani C, Priolo P. Effect of stitching on the low-velocity impact response of
[3]
s graphite/epoxy laminates [J]. Composites Part A: Applied Science and Manufacturing, 2007, 38(4): 1174-1182.
[4]
Aymerich F, Pani C, Priolo P. Damage response of stitched cross-ply laminates under impact loadings [J]. Engineering Fracture Mechanics, 2007, 74(4): 500-514.
[5]
Aymerich F, Priolo P. Characterization of fracture modes in stitched and unstitched cross-ply laminates subjected to low-velocity impact and compression after impact loading [J]. International Journal of Impact Engineering, 2008, 35(7): 591-608.
[6]
毛春见, 许希武, 郑 达. 缝合复合材料层板低速冲击及冲击后压缩实验研究 [J]. 复合材料学报, 2012, 29(2): 160-166. Mao Chunjian, Xu Xiwu, Zheng Da. Experimental investigation of stitched laminates subjected to low-velocity impact and compression after impact [J]. Acta Materiae Compositae Sinica, 2012, 29(2): 160-166.
[7]
Liu D. Delamination resistance in stitched and unstitched composite plates subjected to impact loading [J]. Journal of Reinforced Plastics and Composites, 1990, 9(1): 59-69.
[8]
Lopresto V, Melito V, Leone C, et al. Effect of stitches on the impact behaviour of graphite/epoxy composites [J]. Composites Science and Technology, 2006, 66(2): 206-214.
[9]
Hashin Z. Fatigue failure criteria for unidirectional fiber composites[J]. ASME, Transactions, Journal of Applied Mechanics, 1981, 48: 846-852.
[10]
Camanho P P, Matthews F L. A progressive damage model for mechanically fastened joints in composite laminates [J]. Journal of Composite Materials, 1999, 33(24): 2248-2280.
[11]
Pedro P C, Carlos G D. Mixed-mode decohesion finite elements for the simulation of delamination in composite Materals,NASA/TM-2002-211737 [R]. Washington:NASA, 2002.
[12]
陈 蔚, 沈宝华, 王彬彬, 等. 缝纫增强复合材料冲击损伤与冲击后压缩破坏研究 [J]. 航空材料学报, 1997, 17(4): 49-53. Chen Wei, Shen Baohua, Wang Binbin, et al. Investigation on the impact damage and post impact compression of stitched composites [J]. Journal of Aeronautical Materials, 1997, 17(4):49-53.
[13]
Rong M Z, Zhang M Q, Liu Y, et al. Effect of stitching on in-plane and interlaminar properties of sisal/epoxy laminates[J]. Journal of Composite Materials, 2002, 36(12): 1505-1526.
[14]
Dransfield K, Baillie C, Mai Y W. Improving the delamination resistance of CFRP by stitching: a review [J]. Composites Science and Technology, 1994, 50(3): 305-317.
[15]
程小全, 郦正能, 寇长河. 缝合复合材料可用性——一般层合板的基本性能 [J]. 复合材料学报, 2004, 21(4):71-76. Cheng Xiaoquan, Li Zhengneng, Kou Changhe. Properties of stitched composite laminates-the principal properties of general laminates[J]. Acta Materiae Compositae Sinica, 2004, 21(4): 71-76.
[16]
李 晨, 许希武. 缝合复合材料层板三维纤维弯曲模型及压缩强度预报 [J]. 复合材料学报, 2006, 23(6): 179-185. Li Chen, Xu Xiwu. 3D fiber waviness model and prediction of compressive strength of stitched laminates [J]. Acta Materiae Compositae Sinica, 2006, 23(6): 179-185.
[17]
陈 纲, 桂良进, 郦正能, 等. 缝纫层合板低速冲击损伤有限元分析 [J]. 航空学报, 2002, 23(1): 55-58. Chen Gang, Gui Liangjin, Li Zhengneng, et al. Finite element analysis of low-velocity impact damage of stitched laminates [J]. Acta Aeronautica et Astronautica Sinica, 2002, 23(1): 55-58.
