Mkaddem A, El Mansori M. Finite element analysis when machining UGF-reinforced PMCs plates chip formation crack propagation and induced damage [J]. Materials & Design, 2009, 30(8): 3295-3302.
[2]
全燕鸣, 叶邦彦. 复合材料的切削加工表面结构与表面粗糙度 [J]. 复合材料学报, 2001, 18(4):128-132. Quan Yanming, Ye Bangyan. Machined surface texture and roughness of composites [J]. Acta Materiae Composite Sinica, 2001, 18(4): 128-132.
[3]
Arola D, Ramulu M. Orthogonal cutting of fiber-reinforced composites: A finite element analysis [J]. International Journal of Mechanical Sciences, 1997, 39(5): 597-613.
[4]
Ramesh M V, Seetharamu K N, Ganesan N, et al. Analysis of machining of FRPs using FEM [J]. International Journal Machine Tools and Manufacture, 1998, 38(12): 1531-1549.
[5]
Mahdi M, Zhang L C. An adaptive three dimensional finite element algorithm for the orthogonal cutting of composite materials [J]. Journal of Materials Processing Technology, 2001, 113(1): 368-372.
[6]
Mahdi M, Zhang L C. A finite element model for the orthogonal cutting of fiber reinforced composite materials [J]. Journal of Materials Processing Technology, 2001, 113(1): 373-377.
[7]
Iliescu D, Gehin D, Iordanoff I, et al. A discrete element method for the simulation of CFRP cutting [J]. Composite Science and Technology, 2010, 70(1): 79-80.
[8]
Wern C W, Ramulu M. Influence of fiber on the cutting stress stated in machining idealized glass fiber composite [J]. Journal of Strain Analysis, 1997, 32(1): 19-26.
[9]
Mkaddem A, Demirci I, Mansori M E. A micro-macro combined approach using FEM for modeling of machining of FRP composites: Cutting forces analysis [J]. Composites Science and Technology, 2008, 68(15): 3123-3127.
[10]
罗 靓, 沈 真, 杨胜春, 等. 碳纤维增强树脂基复合材料层合板低速冲击性能试验研究 [J]. 复合材料学报, 2008, 25(3): 20-24. Luo Liang, Shen Zhen, Yang Shengchun, et al. Experimental study on low-velocity impact performance of carbon fiber reinforced composite laminates [J]. Acta Materiae Composite Sinica, 2008, 25(3): 20-24.
Soldani X, Santiuste C, Miguélez H, et al. Influence of tool geometry and numerical parameters when modeling orthogonal cutting of LFRP composites [J]. Composites Part A: Applied Science and Manufacturing, 2011, 42(9): 1205-1216.
[13]
Hashin Z, Rotem A. A fatigue criterion for fiber-reinforced materials [J]. Journal of Composite Materials,1973,7(6):448-464.
[14]
Hashin Z. Failure criteria for unidirectional fiber composites [J]. Journal of Applied Mechanics, 1980, 7(4): 329-334.
[15]
Rao G, Mahajana P, Bhatnagar N. Three-dimensional macro-mechanical finite element model for machining of unidirectional fiber reinforced polymer composites [J]. Materials Science and Engineering, 2008, 498(1-2):142-149.
[16]
Rentsch R, Pecat O, Brinksmeier E. Macro and micro process modeling of the cutting of carbon fiber reinforced plastics using FEM [J]. Procedia Engineering, 2011, 10: 1823-1828.
[17]
Santiuste C, Soldani X, Miguélez M H. Machining FEM model of long fiber composites for aeronautical components [J]. Components Structures, 2010, 92(3): 691-698.
