金明生.模具自由曲面气囊抛光机理及工艺研究 [D].杭州: 浙江工业大学, 2009.Jin Minsheng.Gasbag polishing mechanism and process on free-form surface mould [D].Hangzhou: Zhejiang University of Technology, 2009.
[2]
丁金福, 李 伟, 虞付进.模具自由曲面抛光过程的分析与研究 [J].模具工业, 2006, 32(9): 66-69.Ding Jinfu, Li Wei, Yu Fujin.Analysis and research on polishing process for free-form surface of die & mould [J].Die&Mould Industry, 2006, 32(9): 66-69.
[3]
李德群, 张宜生.模具企业数字技术的现状与发展 [J].CAD/CAM与制造业信息化, 2003, 7(1): 10-15.Li Dequn, Zhang Yisheng.The development and status of mold manufacturing technology [J].Digital Manufacturing Industry, 2003, 7(1): 10-15.
[4]
Ji S M, Jin M S, Zhang L.Design of spinning-inflated-gasbag polishing tool and it's automated system for free-form mould [J].WSEAS Transactions on Systems, 2006, 5(6): 1448-1454.
[5]
计时鸣, 金明生, 张 宪.应用于模具自由曲面的新型气囊抛光技术 [J].机械工程学报, 2007, 43(8): 2-6.Ji Shiming, Jin Mingsheng, Zhang Xian.Novel gasbag polishing technique for free-form mold [J].Chinese Journal of Mechanical Engineering, 2007, 43(8): 2-6.
[6]
许亚敏.软固结磨粒气压砂轮的光整加工技术与实验研究 [D].杭州: 浙江工业大学, 2009.Xu Yamin.Finishing technique of pressure grinding wheel with softness fixed abrasive and experimental study [D].Hangzhou: Zhejiang University of Technology, 2009.
[7]
Lee S H, Wang S, Pharr G M, et al.Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis [J].Composites Part A: Applied Science and Manufacturing, 2007, 38(6): 1517-1524.
[8]
张慧慧, 郭利伟, 邵惠丽.炭黑填充Lyocell纤维的制备及其应用于炭纤维原丝的研究初探 [J].新型炭材料, 2004, 19(3): 172-178.Zhang Huihui, Guo Liwei, Shao Huili.Study for carbon-fiber strand from the preparation of black carbon filled Lyocell fiber [J].New Carbon Materials, 2004, 19(3): 172-178.
[9]
吴友平, 贾清秀, 刘 力.橡胶增强的理论研究 [J].合成橡胶工业, 2004, 27(1): 1-5.Wu Youping, Jia Qingxiu, Liu Li.Theoretical study of the rubber reinforcement [J].China Synthetic Rubber Industry, 2004, 27(1): 1-5.
[10]
宋 华.短纤维增强PVC复合材料力学性能研究 [D].上海: 东华大学, 2003.Song Hua.Mechanical behaviors of the short fiber reinforced PVC composite [D].Shanghai: Dong Hua University, 2003.
[11]
宋 娜.单向纤维复合材料拉伸破坏机制和强度研究 [D].南京: 南京航空航天大学, 2008.Song Na.On tensile failure mechanism and strength of unidirectional fiber reinforced composite materials [D].Nanjing: Nanjing University of Aeronautics and Astronautics, 2008.
[12]
张立群, 金日光.短纤维橡胶复合材料强度的理论研究Ⅰ纵向拉伸强度的理论预测 [J].复合材料学报, 1998, 15(4): 89-96.Zhang Liqun, Jin Riguang.The theoretical study of short fiber-rubber composite material for the prediction about longitudinal tensile strength [J].Acta Materiae Compositae Sinica, 1998, 15(4): 89-96.
[13]
中华人民共和国国家质量监督检验检疫总局.GB/T 528-2009硫化橡胶或热塑性橡胶拉伸应力应变性能的测定 [S].北京: 中国标准出版社, 2009.General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China.GB/T 528-2009 Rubber, vulcanized or thermoplastic-Determination of tensile stress-strain properties [S].Beijing: Standards Press of China, 2009.
[14]
孙开俊, 顾伯勤, 周剑锋.单向短纤维增强复合材料纵向弹性模量预测 [J].南京工业大学学报: 自然科学版, 2011, 33(2): 85-88.Sun Kaijun, Gu Boqin, Zhou Jianfeng.Prediction of lontudinal elastic modulus of unidirectional short-fiber-reinforced composites [J].Journal of Nanjing University of Technology: Natural Science Edition, 2011, 33(2): 85-88.
[15]
丁洁瑾.软固结磨粒气压砂轮的优化设计及性能实验 [D].杭州: 浙江工业大学, 2012.Ding Jiejin.Optimal design and experimental research of pressure grinding wheel with soft abrasive consolidation [D].Hangzhou: Zhejiang University of Technology, 2012.
[16]
曾 晰.软固结磨粒气压砂轮设计方法及材料去除特性研究 [D].杭州: 浙江工业大学, 2013.Zeng Xi.Research on machining mechanism of softness consolidation abrasives finishing method [D].Hangzhou: Zhejiang University of Technology, 2013.
