王荣国, 武卫莉, 古万里.复合材料概论 [M].哈尔滨: 哈尔滨工业大学出版社, 2001: 11-12.Wang Rongguo, Wu Weili, Gu Wanli.Introduction of composite materials [M].Harbin: Harbin Institute of Technology Press, 2001: 11-12.
[2]
张厚江.碳纤维复合材料(CFRP)钻削加工技术的研究 [D].北京: 北京航空航天大学, 1998.Zhang Houjiang.Study on the drilling technology of CFRP [D].Beihang University, 1998.
[3]
Ozden I, Elaheh G.Delamination and wear in drilling of carbon-fiber reinforced plastic composites using multilayer TiAlN/TiN PVD-coated tungsten carbide tools [J].Journal of Reinforced Plastics and Composites, 2012, 31(10): 717- 727.
[4]
代汉达, 高印寒, 刘耀辉, 等.Al2O3f+Cf/ZL109 混杂复合材料钻削加工性的研究 [J].复合材料学报, 2004, 21(1): 141-145.Dai Handa, Gao Yinhan, Liu Yaohui, et al.Investigation on drilling machinability of Al2O3f+Cf/L109 hybrid composites [J].Acta Materiae Compositae Sinica, 2004, 21(1): 141-145.
[5]
Whinnem E, Lipczynski G, Eriksson I.Development of orbital drilling for the Boein787 [J].SAE International Journal of Aerospace, 2008, 1(1): 811-816.
[6]
Wang Y N.Orbital drilling of aerospace materials [C]//SAE Aerospace Manufacturing and Automated Fastening Conference and Exhibition.2007, 1(1): 3814-3822
[7]
朱春燕, 蒋红宇, 张烘洲.飞机装配铣削制孔和钻孔技术对比分析 [J].南京航空航天大学学报, 2012, 44(增刊1): 37- 41.Zhu Chunyan, Jiang Hongyu, Zhang Hongzhou.Comparing analysis of milling and drilling holes for aircraft assembly [J].Journal of Nanjing University of Aeronautics & Astronautics, 2012, 44(Suppl.1): 37-41.
[8]
王 奔, 高 航, 毕铭智, 等.C/E复合材料螺旋铣削制孔方法抑制缺陷产生的机理 [J].机械工程学报, 2012, 48(15): 173-181.Wang Ben, Gao Hang, Bi Mingzhi, et al.Mechanism of reduction of damage during orbital drilling of C/E composites [J].Journal of Mechanical Engineering, 2012, 48(15): 173-181.
[9]
Denkena B, Boehnke D, Dege J H.Helical milling of CFRP/titanium layer compounds [J].CIRP Journal of Manufacturing Science and Technology, 2008, 1(2): 64- 69.
[10]
Schulz H, Abele E, 何 宁.高速加工理论与应用 [M].北京: 科学出版社, 2010: 302-303.Schulz H, Abele E, He Ning.The high speed machining fundamentals and application [M].Beijing: Science Press, 2010: 302-303.
[11]
陈 魁.试验设计与分析 [M].北京: 清华大学出版社, 2005: 254-256.Chen Kui.Experiment design and analysis [M].Beijing: Tsinghua University Press, 2005: 254-256.
[12]
李云雁, 胡传荣.试验设计与数据处理 [M].北京: 化学工业出版社, 2005: 125-127.Li Yunyan, Hu Chuanrong.Experiment design and data processing [M].Beijing: Chemical Industry Press, 2005: 125-127.
[13]
张厚江, 陈五一, 陈鼎昌.碳纤维复合材料(CFRP)钻孔出口缺陷研究 [J].机械工程学报, 2004, 40(7): 150-155.Zhang Houjiang, Chen Wuyi, Chen Dingchang.Investigation of the exit defects in drilling carbon fiber-reinforced plastic plates [J].Chinese Journal of Mechanical Engineering, 2004, 40(7): 150-155.
[14]
张厚江, 陈五一, 陈鼎昌.声学显微镜用于碳纤维复合材料钻孔分层检测的研究 [J].复合材料学报, 1998, 15(3): 62-65.Zhang Houjiang, Chen Wuyi, Chen Dingchang.Examination of drilling delamination of CFRP using a scanning acoustic microscope [J].Acta Materiae Compositae Sinica, 1998, 15(3): 62-65.
