康炘蒙, 程小全, 郦正能, 等.SiCP/Al复合材料的拉伸性能 [J].复合材料学报, 2009, 26(4): 83-88.Kang Xinmeng, Cheng Xiaoquan, Li Zhengneng, et al.Tensile mechanical properties of SiCP/Al composites [J].Acta Materiae Compositae Sinica, 2009, 26(4): 83-88.
[2]
Guel I E, Gallardo C C, Ruiz M D C, et al.Graphite nanoparticle dispersion in 7075 aluminum alloy by means of mechanical alloying [J].Journal of Alloys and Compounds, 2009, 483(1): 173-177.
[3]
Chakraborty S P, Banerjee S, Sharma I G, et al.Studies on the synthesis and characterization of a molybdenum-based alloy [J].Journal of Alloys and Compounds, 2009, 477(1): 256-261.
[4]
Samuel A M, Gauthier J, Samuel F H.Microstructural aspects of the dissolution and melting of Al2Cu phase in Al-Si alloys during solution heat treatment [J].Metallurgical and Materials Transactions A, 1996, 27(7): 1785-1798.
[5]
赵文贵.PrxOy 对铸造Al-Cu合金组织和性能的影响规律及机制 [D].长春: 吉林大学, 2009: 45.Zhao Wengui.Laws and mechanisms for the effects of PrxOy on the microstructures and properties of the cast Al-Cu alloys [D].Changchun: Jilin University, 2009: 45.
[6]
Liu G, Zhang G J, Ding X D, et al.Modeling the strengthening response to aging process of heat-treatable aluminum alloys containing plate/disc-or rod/needle-shaped precipitates [J].Materials Science and Engineering: A, 2003, 344(1): 113-124.
[7]
Kim J K, Jeong H G, Hong S I, et al.Effect of aging treatment on heavily deformed microstructure of a 6061 aluminum alloy after equal channel angular pressing [J].Scripta Materialia, 2001, 45(8): 901-907.
[8]
Fogagnolo J B, Amador D, Ruiz-Navas E M, et al.Solid solution in Al-4.5wt%Cu produced by mechanical alloying [J].Materials Science and Engineering: A, 2006, 433(1): 45-49.
[9]
张孜昭, 许晓嫦, 刘志义, 等.强变形诱导形成的Al-Cu合金过饱和固溶体在继续变形时的再析出行为 [J].中国有色金属学报, 2009, 19(11): 1962-1968.Zhang Zizhao, Xu Xiaochang, Liu Zhiyi, et al.Re-precipitate behavior of supersaturated solid solution of Al-Cu alloy caused by severe plastic deformation during subsequent deformation [J].The Chinese Journal of Nonferrous Metals, 2009, 19(11): 1962-1968.
[10]
Yan N, Geng D L, Hong Z Y, et al.Rapid solidification of acoustically levitated Al-Cu-Si eutectic alloy under laser irradiation [J].Chinese Science Bulletin, 2011, 56(9): 912-918.
[11]
Omori M.Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS) [J].Materials Science and Engineering: A, 2000, 287(2): 183-188.
[12]
Gu J, Gu S, Xue L, et al.Microstructure and mechanical properties of in-situ Al13Fe4/Al composites prepared by mechanical alloying and spark plasma sintering [J].Materials Science and Engineering: A, 2012, 558: 684-691.
[13]
刘向兵, 贾成厂, 王富祥, 等.热压与放电等离子体烧结两种工艺制备Al2O3/Cu复合材料[J].复合材料学报, 2007, 24(4): 76-81.Liu Xiangbing, Jia Chengchang, Wang Fuxiang, et al.Al2O3/Cu composite fabricated by hot pressing and spark plasma sintering [J].Acta Materiae Compositae Sinica, 2007, 24(4): 76-81.
Cullity B D, Stock S R.Elements of X-ray diffraction [M].3rd ed.New York: Prentice-Hall Inc, 2001: 167-171.
[16]
Xi S, Zuo K, Li X, et al.Study on the solid solubility extension of Mo in Cu by mechanical alloying Cu with amorphous Cr (Mo) [J].Acta Materialia, 2008, 56(20): 6050-6060.
