Koroglu S, Umurkan N, Kilic O.Experimental performance investigation of double-layer shields at power frequency magnetic shielding [C]//Power Quality and Supply Reliability Conference Proceedings.2008: 207-210.
[2]
杨益航, 王德志, 林高用, 等.磁屏Cu-Fe-Cu叠层材料的轧制复合 [J].复合材料学报, 2012, 29(4): 126-131.Yang Yihang, Wang Dezhi, Lin Gaoyong, et al.Cu-Fe-Cu laminated composite for electromagnetic shielding by roll-bonding [J].Acta Materiae Compositae Sinica, 2012, 29(4): 126-131.
[3]
Hassan E, Ismaeil M, Mohammed A.Shielding effectiveness of multi-layered cylindrical and spherical magnetic shells for static fields [C]//National Radio Science Conference.2009: 15-20.
[4]
武高辉, 陈 翔, 张 强, 等.一种特种合金薄壁构件的制备方法: 中国, ZL201010235117.X [P].2010-07-23.Wu Gaohui, Chen Xiang, Zhang Qiang, et al.A preparing method of specific-alloy-thin-wall-member: Chinese Patent, ZL201010235117.X [P].2010-07-23 .
[5]
陈 翔.铁镍梯度合金的地磁屏蔽行为研究 [D].哈尔滨: 哈尔滨工业大学, 2010.Chen Xiang.Study on magnetic shielding behavior of graded iron-nickel alloy [D].Harbin: Harbin Institute of Technology, 2010.
[6]
Wu Z, Kang P C, Wu G H, et al.The effect of interface modification on fracture behavior of tungsten fiber reinforced copper matrix composites [J].Materials Science and Engineering: A, 2012, 536: 45-48.
[7]
Wu Z, Kang P C, Wu G H, et al.Effect of heating process on fracture behaviors of Wf/Cu82Al10Fe4Ni4 composites [J].Journal of Materials Science, 2011, 46(16): 5541-5545.
[8]
武高辉, 吴 哲, 康鹏超, 等.一种钨丝或钨合金丝增强复合材料棒: 中国, ZL200910121355.5 [P].2012-07-13.Wu Gaohui, Wu Zhe, Kang Pengchao, et al.Tungsten wire or tungsten alloy wire reinforced composite rod: Chinese Patent, ZL200910121355.5 [P].2012-07-13.
[9]
中国科学院金属研究所.GB/T 17754-2012摩擦学术语 [S].北京: 中国标准出版社, 2013.Institute of Metal Research, Chinese Academy of Sciences.GB/T 17754-2012 Tribology terminology [S].Beijing: Standards Press of China, 2013.
广州机床研究所.自润滑材料国内外概况 [J].润滑与密封, 1979(2): 58-65.Guangzhou Institute of Machine Tool.An overview of self-lubricating materials [J].1979(2): 58-65.
[12]
霍生伟, 李长生, 唐 华, 等.NbSe2/Cu新型自润滑复合材料制备及其摩擦学性能 [J].复合材料学报, 2013, 30(4): 121-127.Huo Shengwei, Li Changsheng, Tang Hua, et al.Preparation and tribological properties of copper matrix solid self-lubricant composites reinforced with NbSe2 sheet [J].Acta Materiae Compositae Sinica, 2013, 30(4): 121-127.
[13]
杨威锋.固体自润滑材料及其研究趋势 [J].润滑与密封, 2007, 32(12): 118-120.Yang Weifeng.The development of solid self-lubricating materials [J].Lubrication Engineering, 2007, 32(12): 118-120.
[14]
修发贤.高体积率TiB2p/LY12的组织与机械性能 [D].哈尔滨: 哈尔滨工业大学, 2000.Xiu Faxian.Microstructure and mechanical properties of high volume fraction TiB2p/LY12 composite [D].Harbin: Harbin Institute of Technology, 2000.
[15]
Zhao M, Wu G H, Jiang L T, et al.Friction and wear properties of TiB2P/Al composite [J].Composites Part A: Applied Science and Manufacturing, 2006, 37(11): 1916-1921.
[16]
武高辉, 姜龙涛, 陈国钦, 等.金属基复合材料界面反应控制研究进展 [J].中国材料进展, 2012, 31(7): 51-58.Wu Gaohui, Jiang Longtao, Chen Guoqin, et al.Research progress on the control of interfacial reactions in metal matrix composites [J].Materials China, 2012, 31(7): 51-58.
[17]
田首夫.TiB2/Al复合材料的自润滑机理研究 [D].哈尔滨: 哈尔滨工业大学, 2013.Tian Shoufu.Study on self-lubrication mechanism for TiB2/Al composite [D].Harbin: Harbin Institute of Technology, 2013.
[18]
宋桂明, 孟庆昌, 王玉金, 等.TiC和ZrC颗粒增强钨基复合材料的烧蚀研究 [J].固体火箭技术, 2001, 24(2): 48-52.Song Guiming, Meng Qingchang, Wang Yujin, et al.Ablation of tungsten matrix composite reinforced by TiC and ZrC particles [J].Journal of Solid Rocket Technology, 2001, 24(2): 48-52.
[19]
张 勇, 何新波, 曲选辉, 等.超高温材料的研究进展及应用 [J].材料导报, 2007, 21(12): 60-64.Zhang Yong, He Xinbo, Qu Xuanhui, et al.Research progress and application of ultra high-temperature materials [J].Materials Review, 2007, 21(12): 60-64.
[20]
易法军.碳基复合材料超高温性能与烧蚀行为 [D].哈尔滨: 哈尔滨工业大学, 2001.Yi Fajun.Ultra high temperature properties and ablation behavior of carbon-based composites [D].Harbin: Harbin Institute of Technology, 2001.
[21]
Chen Z K, Xiong X.Ablation behaviors of carbon/carbon composites with C-SiC-TaC multi-interlayers [J].Applied Surface Science, 2009, 255(22): 9217-9223.
[22]
Bruneton E, Narcy B, Oberlin A.Carbon-carbon composite prepared by a rapid densification process I: synthesis and physico-chemical data [J].Carbon, 1997, 35(10-11): 1593-1598.
[23]
姜贵庆, 刘连元.高速气流传热与烧蚀热防护 [M].北京: 国防工业出版社, 2003: 4-7.Jiang Guiqing, Liu Lianyuan.Heat transfer of hypersonic gas and ablation thermal protection [M].Beijing: National Defence Industry Press, 2003: 4-7.
[24]
武高辉, 陈 苏, 白 雪, 等.Al-Mg/C耗散防热材料静态氧化模型 [J].稀有金属材料与工程, 2010, 39(1): 520-524 Wu Gaohui, Chen Su, Bai Xue, et al.Static oxidation model of Al-Mg/C dissipation thermal protection materials [J].Rare Metal Materials and Engineering, 2010, 39(1): 520-524 .
[25]
武高辉, 康鹏超, 张 强.基于新型防热机理的防热材料的设计与试验验证 [J].中国材料进展, 2012, 31(1): 56-60.Wu Gaohui, Kang Pengchao, Zhang Qiang.Design and experimental verification of thermal protective materials based on the new thermal protective mechanism [J].Materials China, 2012, 31(1): 56-60.
[26]
Li B Q, Kang P C, Gou H S, et al.Ablation mechanisms of interpenetrating Al20Si/graphite composites [J].Ceramics International, 2013, 39(5): 4819-4824.
[27]
武高辉, 陈 苏, 张 强, 等.一种真空压力浸渗制备金属基复合材料的方法: 中国, ZL200810064995.2 [P].2008-07-25. Wu Gaohui, Chen Su, Zhang Qiang, et al.A method of preparing metal matrix composites by vacuum squeeze casting: Chinese Patent, ZL200810064995.2 [P].2008-07-25.
[28]
李冰清.Al20Si/Gr耗散防热材料氧-乙炔和发动机燃烧室烧蚀性能研究 [D].哈尔滨: 哈尔滨工业大学, 2011.Li Bingqing.Research on the O2-C2H2 and ramjet combustor ablation resistance of Al20Si/Gr transpiring coolant materials [D].Harbin: Harbin Institute of Technology, 2011 .
[29]
Otsuka K, Ren X.Physical metallurgy of Ti-Ni-based shape memory alloys [J] .Progress in Materials Science, 2005, 50(5): 511-678.
[30]
Angioni S L, Meo M, Foreman A.Impact damage resistance and damage suppression properties of shape memory alloys in hybrid composites—a review [J].Smart Materials and Structures, 2011, 20(1): 013001.
[31]
Frenzel J, George E P, Dlouhy A, et al.Influence of Ni on martensitic phase transformations in NiTi shape memory alloys [J].Acta Materialia, 2010, 58(9): 3444-3458.
[32]
Hu J, Zhang Q, Liu Y, et al.Phase transformation behaviors of TiNi fibers embedded in an aluminum matrix [J].Journal of Alloys and Compounds, 2014, 589: 491-497
[33]
Koroglu S, Sergeant P, Umurkan N.Comparison of analytical finite element and neural network methods to study magnetic shielding [J].Simulation Modelling Practice and Theory, 2010, 18(2): 206-216.
