全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

石墨烯/氰酸酯-环氧树脂复合材料的制备和性能

, PP. 1154-1159

Keywords: 氰酸酯,环氧树脂,复合材料,石墨烯,氧化石墨烯

Full-Text   Cite this paper   Add to My Lib

Abstract:

为优化石墨烯/氰酸酯(CE)复合材料的制备工艺并提高其韧性,制备了对苯二胺(PPD)功能化的氧化石墨烯(GO-PPD),分别以GO和GO-PPD为添加物,以CE和环氧树脂(质量比为7:3)共混物为基体树脂制备了GO/CE-环氧树脂和GO-PPD/CE-环氧树脂复合材料。采用红外和拉曼光谱表征GO和GO-PPD的结构,并研究了二者在溶剂中的溶解性。GO-PPD在乙醇等低沸点和低毒性的有机溶剂中表现出稳定的溶解性,与GO相比,GO-PPD明显改善了复合材料制备的工艺性。性能研究表明,GO和GO-PPD的加入均会降低基体树脂的固化温度,明显提高其力学性能和热性能,使基体树脂的介电常数和介电损耗显著增大,但仍然基本保持良好的耐湿热性和耐腐蚀性。石墨烯表面的化学性质影响石墨烯/CE-环氧树脂复合材料的综合性能,与GO相比,GO-PPD的加入能更明显提高复合材料的力学性能和耐热性。

References

[1]  Liang G, Ren P, Zhang Z, et al.Effect of the epoxy molecular weight on the properties of a cyanate ester/epoxy resin system [J].Journal of Applied Polymer Science, 2006, 101(3): 1744-1750.
[2]  Zeng M, Lu C, Wang B, et al.Free volume hole size of cyanate ester resin/epoxy resin interpenetrating networks and its correlations with physical properties [J].Radiation Physics and Chemistry, 2010, 79(9): 966-975.
[3]  Liang G, Zhang M.Enhancement of processability of cyanate ester resin via copolymerization with epoxy resin [J].Journal of Applied Polymer Science, 2002, 86(9): 2377-2381.
[4]  Lin Y, Song M, Stone C A, et al.A comprehensive study on the curing kinetics and network formation of cyanate ester resin/clay nanocomposites [J].Thermochimica Acta, 2013, 552: 77-86.
[5]  赫玉欣, 张 丽, 朱伸兵, 等.碳纳米管的表面改性对环氧树脂低温(77 K)冲击性能及热膨胀系数的影响 [J].复合材料学报, 2012, 29(4): 56-62.Hao Yuxin, Zhang Li, Zhu Shenbing, et al.Effects of functionalized MWCNTs on the impact strength at cryogenic temperature (77 K) and coefficient of thermal expansion of MWCNTs/epoxy resin [J].Acta Materiae Compositae Sinica, 2012, 29(4): 56-62.
[6]  刘 夏, 杨庆生.三维网络碳纳米管增强环氧树脂复合材料的细观力学 [J].复合材料学报, 2013, 30(3): 173-178.Liu Xia, Yang Qingsheng.Microscopic mechanical behavior of reticulate carbon nanotube reinforced epoxy composites [J].Acta Materiae Compositae Sinica, 2013, 30(3): 173-178.
[7]  Zaman I, Phan T T, Kuan H C, et al.Epoxy/graphene platelets nanocomposites with two levels of interface strength [J].Polymer, 2011, 52(7): 1603-1611.
[8]  Song P, Cao Z, Cai Y, et al.Fabrication of exfoliated graphene-based polypropylene nanocomposites with enhanced mechanical and thermal properties [J].Polymer, 2011, 52(18): 4001-4010.
[9]  Kuilla T, Bhadra S, Yao D, et al.Recent advances in graphene based polymer composites [J].Progress in Polymer Science, 2010, 35(11): 1350-1375.
[10]  Wang X, Jin J, Song M.Cyanate ester resin/graphene nanocomposite: Curing dynamics and network formation [J].European Polymer Journal, 2012, 48(6): 1034-1041.
[11]  Lin Q, Qu L, Lü Q, et al.Preparation and properties of graphene oxide nanosheets/cyanate ester resin composites [J].Polymer Testing, 2013, 32(2): 330-337.
[12]  蒋一鸣, 林气浪, 杨友结, 等.氰酸脂树脂/氧化石墨纳米复合材料的制备及特征 [J].高分子材料科学与工程, 2012, 28(3): 134-136.Jiang Yiming, Lin Qilang, Yang Youjie, et al.Preparation and properties of graphene oxide nanosheets/cyanateester resin composites [J].Polymer Materials Science & Engieering, 2012, 28(3): 134-136.
[13]  Hummers W S, Offeman R E.Preparation of graphitic oxide [J].Journal of American Chemistry Society, 1958, 80(6): 1339.
[14]  中国建筑材料联合会.GB/T 2567-2008 树脂浇铸体性能试验方法 [S].北京: 中国标准出版社, 2008.China Building Materials Federation.GB/T 2567-2008 Testing methods of the performance of resin casting body performance [S].Beijing: Standards Press of China, 2008.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133