van Rijswijka K, Lindstedta S, Vlasveldb D P N, et al.Reactive processing of anionic polyamide-6 for application infiber composites: A comparitive study with melt processed polyamides and nanocomposites [J].Polymer Testing, 2006, 25(7): 873-887.
[2]
Subramanian C, Deshpande S B, Senthilvelan S.Effect of reinforced fiber length on the damping performance of thermoplastic composites [J].Advanced Composite Materials, 2011, 20(4): 319-335.
[3]
Chollakup R, Tantatherdtam R, Ujjin S, et al.Pineapple leaf fiber reinforced thermoplastic composites: effects of fiber length and fiber content on their characteristics [J].Journal of Applied Polymer Science, 2011, 119(4): 1952-1960.
[4]
杨铨铨, 梁基照.连续纤维增强热塑性复合材料的制备与成型 [J].塑料科技, 2007, 35(6): 34-40.Yang Quanquan, Liang Jizhao.Preparation and forming of continuous fiber reinforced thermoplastic plastics composites [J].Plastic Science and Technology, 2007, 35(6): 34-40.
[5]
van Rijswijk K, Bersee H E N.Reactive processing of textile fiber-reinforced thermoplastic composites-An overview [J].Composites Part A: Applied Science and Manufacturing, 2007, 38(3): 666-681.
[6]
张翼鹏, 颜 春, 阮春寅, 等.原位聚合法制备连续玻璃纤维增强聚环状对苯二甲酸丁二醇酯复合材料及其性能 [J].复合材料学报, 2012, 29(4): 29-35.Zhang Yipeng, Yan Chun, Ruan Chunyin, et al.Preparation and properties of continuous fiber reinforced PCBT composites by in-situ polymerization [J].Acta Materiae Compositae Sinica, 2012, 29(4): 29-35.
[7]
van Rijswijk K, van Geenen A A, Bersee H E N.Textile fiber-reinforced anionic polyamide-6 composites.Part II: Investigation on interfacial bond formation by short beam shear test [J].Composites Part A: Applied Science and Manufacturing, 2009, 40(8): 1033-1043.
[8]
Brouwer W D, van Herpt E C F C, Labordus M.Vacuum injection moulding for large structural applications [J].Composites Part A: Applied Science and Manufacturing, 2003, 34(6): 551-558.
[9]
van Rijswijk K, Teuwen J J E, Bersee H E N, et al.Textile fiber-reinforced anionic polyamide-6 composites.Part I: The vacuum infusion process [J].Composites Part A: Applied Science and Manufacturing, 2009, 40(1): 1-10.
[10]
van Rijswijk K, Joncas S, Bersee H E N, et al.Sustainable vacuum-infused thermoplastic composites for MW-size wind turbine blades-preliminary design and manufacturing issues [J].Journal of Solar Energy Engineering, 2005, 127(4): 570-580.
[11]
Pillay S, Vaidya U K, Janowski G M.Liquid molding of carbon fabric-reinforced nylon matrix composite laminates [J].Journal of Thermoplastic Composite Materials, 2005, 18(6): 509-527.
[12]
Zheng L Y, Wang Y L, Wan Y Z, et al.Preparation and properties of in situ polymerized fiber-reinforced nylon composites [J].Journal of Materials Science Letters, 2002, 21(13): 987-989.
[13]
van Rijswijk K, Bersee H E N, Jager W F, et al.Optimisation of anionic polyamide-6 for vacuum infusion of thermoplastic composites: choice of activator and initiator [J].Composites Part A: Applied Science and Manufacturing, 2006, 37(6): 949-956.
[14]
van Rijswijk K, Bersee H E N, Beukers A, et al.Optimisation of anionic polyamide-6 for vacuum infusion of thermoplastic composites: Influence of polymerisation temperature on matrix properties [J].Polymer Testing, 2006, 25(3): 392-404.
[15]
van Rijswijk K.Thermoplastic composite wind turbine blades—Vacuum infusion technology for anionic polyamide-6 composites [D].Delft: Delft University of Technology, 2007.
[16]
Yan C, Li H Z, Zhang X Q, et al.Preparation and properties of continuous glass fiber reinforced anionic polyamide-6 thermoplastic composites [J].Materials & Design, 2013, 46: 688-695.
Cartledge H C Y, Baillie C A.Studies of microstructural and mechanical properties of nylon/glass composite.Part I: The effect of thermal processing on crystallinity, transcrystallinity and crystal phases [J].Journal of Materials Science, 1999, 34(20): 5099-5111.
[19]
American Society for Testing and Materials International.ASTM D3039/D3039M-00 Standard test method for tensile properties of polymer matrix composite materials [S].West Conshohocken, United States: American Society for Testing and Materials International, 2000.
[20]
American Society for Testing and Materials International.ASTM D7264/D7264M-07 Standard test method for flexural properties of polymer matrix composite materials [S].West Conshohocken, United States: American Society for Testing and Materials International, 2007.
[21]
American Society for Testing and Materials International.ASTM D2344/D2344M-00 Standard test method for short-beam strength of polymer matrix composite materials and their laminates [S].West Conshohocken, United States: American Society for Testing and Materials International, 2000.
[22]
Wicks Jr Z W.Blocked isocyanates [J].Progress in Organic Coatings, 1975, 3(1): 733-799.
[23]
Mateva R, Delev O, Kaschcieva E.Structure of poly(ε-caprolactam) obtained in anionic bulk polymerization [J].Journal of Applied Polymer Science, 1995, 58(13): 2333-2343.
