田春雷, 皮爱国, 黄风雷.CFRP复合材料层合圆筒轴向压缩试验与数值模拟 [J].复合材料学报, 2013, 30(2): 159-164.Tian Chunlei, Pi Aiguo, Huang Fenglei.Experimental and numerical study on CFRP tubes under axial crushing [J].Acta Materiae Compositae Sinica, 2013, 30(2): 159-164.
[2]
王 巍, 陈 燕, 牟 娟.钎焊金刚石工具磨削CFRP的试验研究 [J].金刚石与磨料磨具工程, 2012, 32(1): 15-18.Wang Wei, Chen Yan, Mu Juan.Researches of hole quality during drilling of CFRP with brazed diamond core drill [J].Diamond & Abrasives Engineering, 2012, 32(1): 15-18.
[3]
李桂玉.叠层复合材料钻削加工缺陷产生机理及工艺参数优化 [D].济南: 山东大学, 2011.Li Guiyu.Research on defects generation mechanism and process optimization in drilling laminated composite [D].Jinan: Shandong University, 2011.
[4]
刘 畅, 王 焱.钛合金动态铣削力预测及其影响因素分析 [J].航空制造技术, 2010(22): 86-88.Liu Chang, Wang Yan.Dynamic cutting force prediction and analysis influence for milling titanium alloy [J].Aeronautical Manufacturing Technology, 2010(22): 86-88.
[5]
Zaghbani I, Chatelain J F, Songmene V.A comprehensive analysis of cutting forces during routing of multilayer carbon fiber-reinforced polymer laminates [J].Journal of Composite Materials, 2012, 46(16): 1955-1971.
[6]
Kalla D, Sheikh-Ahmad J, Twomey J.Prediction of cutting forces in helical end milling fiber reinforced polymers [J].International Journal of Machine Tools and Manufacture, 2010, 50(10): 882-891.
[7]
张厚江.单向碳纤维复合材料直角自由切削力的研究 [J].航空学报, 2005, 26(5): 604-609.Zhang Houjiang.Study on cutting force of unidirectional carbon fiber reinforced plastic under orthogonal cutting [J].Acta Aeronautica et Astronautica Sinica, 2005, 26(5): 604-609.
[8]
康永峰, 王文理, 王晓丽.碳纤维复合材料高速开槽铣削试验研究 [J].航空制造技术, 2010(22): 82-85.Kang Yongfeng, Wang Wenli, Wang Xiaoli.Experimental study on high-speed groove milling of CFRP [J].Aeronautical Manufacturing Technology, 2010(22): 82-85.
[9]
方海涛.铣削力建模及可转位铣刀动态特性研究 [D].武汉: 华中科技大学, 2012.Fang Haitao.Research of milling force modeling and dynamic characteristic of indexable milling cutter [D].Wuhan: Huazhong University of Science and Technology, 2012.
[10]
Karpat Y, Bahtiyar O, De er B.Milling force modelling of multidirectional carbon fiber reinforced polymer laminates [J].Procedia CIRP, 2012(1): 460-465.
