全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

层间颗粒增韧HT3/QY8911的损伤阻抗和损伤容限

, PP. 167-172

Keywords: HT3/,Q,Y8911,层间颗粒增韧,损伤阻抗,损伤容限,准静态压痕力

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用热塑性颗粒对双马基体复合材料层合板HT3/QY8911进行层间增韧,制备未加入增韧颗粒的对比件和加入增韧颗粒的改性件。通过准静态压痕(QSI)实验和冲击后压缩实验,研究了层间增韧后HT3/QY8911的损伤阻抗和损伤容限特性。结果和分析表明,改性件在静压痕力下具有较高的分层起始载荷,或在相同载荷水平下具有较小的损伤面积。提出从分层起始点载荷大小和载荷下降程度两方面来衡量试件对准静压痕力的响应。在相同的静压痕力或单位厚度冲击能量下,层间增韧后的HT3/QY8911具有较深的凹坑,表明塑性变形较大的层间区域以凹坑为代价换取了较小的损伤面积,具有较高的损伤阻抗。在冲击后压缩面积相差不大的情况下,层间增韧件的冲击后压缩强度和压缩破坏应变显著增加。

References

[1]   Stevanovic D. Delamination properties of a vinyl-ester/ glassfibre composite toughened by particulate-modified interlayers[D] . Canberra : Department of Engineering , Aust ralianNational University , 2001.
[2]   Alt stadt V , Gert h D , Stangle M. Interlaminar crack growt h int hird2generation t hermoset prepreg system [J] . Pol ymer ,1993 , 34 (4) : 907 - 909.
[3]   Rechak S , Sun C T. Optimal use of adhesive layers in reducingimpact damage in composite laminates [J] . J ournal of Reinf orced Plastics and Composi tes , 1990 , 9 (6) :569 - 582.
[4]   Ishai O , Sela N. Interlaminar fracture toughness and toughening oflaminated composite materials : A review [J] . Composites ,1989 , 20 (5) : 423 435.
[5]   Groleau M R , Shi Y B , Yee A F , et al . Mode Ⅱf racture ofcomposites interlayered wit h nylon particles [J] . CompositesScience and Technology , 1996 , 56 (11) : 1223 - 1240.
[6]   Odagri N , Muraki T , Tobukuro K. Toughness improved highperformance torayca prepreg T800H/ 3900 series [A] . In :Carrillo G, Newell E D , Brown W D , et al , eds. Proceedings33rd International SAMPE Symposium [C] . Covina , CA : Society for t he Advancement of Material and Process Engineering , 1988. 272 - 283.
[7]   矫桂琼, 杨宝宁. 层间增韧复合材料研究[J] . 宇航材料工艺,2001 (4) : 36 - 39.Jiao G Q , Yang B N. A study on interleaved composites [J] .Aeros pace Materials & Technology , 2001 (4) : 36 - 39.高 峰, 等: 层间颗粒增韧HT3/ Q Y8911 的损伤阻抗和损伤容限?171 ?
[8]   宋 涛, 宁荣昌. 热塑/ 热固共混树脂胶膜对复合材料抗冲击损伤性能影响[J] . 玻璃钢/ 复合材料, 1998 (3) : 10 - 13.Song T , Ning R C. Effect of t he adhesive layer of t hermoplastic/ t hermoset blend on impact damage in composite laminates[J] . Fiber Reinf orced Plast ic/ Composites , 1998 (3) : 10 - 13.
[9]   National Materials Advisory Board. New Materials for Nextgeneration Commercial Transport [M] . Washington D C: National Academy Press , 1996. 37.
[10]  Greenhalgh E S , Hiley M J . The assessment of novel materials and processes for t he impact tolerant design of stiffenedcomposite aerospace st ructures [J] . Composites A , 2003 , 34(2) : 151 - 161.
[11]  Yang X , Shen Z , Yan Y, et al . New met hodology for evaluation toughness of composite laminates-investigation of damageresistance [J] . Chinese J ournal of Aeronautics , 2003 ,16 (2) :73 - 79.
[12]  ASTM D6264 - 98. Standard test met hod for measuring t hedamage resistance of a fiber-reinforced polymer-mat rixcomposite to a concent rated quasi-static indentation force
[13]  [S] .2004.
[14]  中国航空研究院. 复合材料飞机结构耐久性/ 损伤容限设计指南[M] . 北京: 航空工业出版社, 2001. 306 - 310.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133