全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

环氧树脂改性双环戊二烯型氰酸酯树脂固化反应性

, PP. 55-60

Keywords: 双环戊二烯型氰酸酯树脂,环氧树脂,固化反应性

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用凝胶试验、FTIR和DSC等手段研究了环氧E-51与双环戊二烯型氰酸酯(DCPDCE)共聚体系的固化反应性以及阶梯固化过程中—OCN基、三嗪环、唑啉、噁唑啉酮的变化情况。结果表明,环氧树脂既能够催化氰酸酯本身三聚成环反应,又对氰酸酯三聚成环反应有稀释作用。当环氧树脂含量(环氧占混合物总量的质量百分比)大于5wt%时,催化效果增加不明显,稀释作用加强;当环氧树脂含量约为25wt%时,以上两种作用效果基本平衡,改性体系的固化反应活性和纯DCPDCE相当。阶梯固化时,低温阶段(160~180℃)主要发生生成三嗪环和唑啉的反应,高温阶段(200~220℃)主要发生三嗪环和唑啉向噁唑啉酮的转化反应。另外,—OCN基的低温转化率随着环氧树脂含量的增大而提高,固化树脂的最终结构组成和环氧树脂的含量有关。

References

[1]  王结良, 梁囯正, 赵 雯, 等. 液体端羧基丁腈橡胶增韧改性氰酸酯树脂 [J]. 复合材料学报, 2005, 22(1): 1 -5. Wang Jieliang, Liang Guozheng, Zhao Wen, et al. Cyanate esters modified by carboxyl-terminated liquid butadiene-acrylonitrile [J]. Acta Materiae Compositae Sinica, 2005, 22(1): 1 -5.
[2]  Martin M D, Ormaetxea M, Harismendy I, Remiro P M, Mondragon I. Cure chemo-rheology of mixtures based on epoxy resins and ester cyanates [J]. European Polymer Journal, 1999, 35(1): 57 -68.
[3]  朱兴松, 刘丽丽, 程子霞, 等. 环氧树脂与氰酸酯共固化反应的研究 [J]. 纤维复合材料, 2001, 8(3): 8 -10. Zhu Xingsong, Liu Lili, Cheng Zixia, et al. Study on co-curing system of epoxy resin and cyanate ester [J]. Fiber Composites, 2001, 8(3): 8 -10.
[4]  任鹏刚, 梁国正, 杨洁颖, 等. 环氧改性氰酸酯复合材料工艺性研究 [J]. 宇航材料工艺, 2003(5): 26 -34. Ren Penggang, Liang Guozheng, Yang Jieying, et al. Laying properties of composite with modified cyanate ester [J]. Aerospace Materials & Technology, 2003(5): 26 -34.
[5]  Nair C P R, Mathew D, Ninan K N. Cyanate ester resins, recent developments [J]. Advances in Polymer Science, 2001, 155: 1 -99.
[6]  王结良, 梁国正, 赵 雯, 等. 高频印刷线路板覆铜板用树脂基体的研究进展 [J]. 中国塑料, 2004, 18(3): 6 -10. Wang Jieliang, Liang Guozheng, Zhao Wen, et al. Advances of some substrate materials used in high frequency printed circuit boards [J]. China Plastics, 2004, 18(3): 6 -10.
[7]  Chang Jer-Yuan, Hong Jin-Long. Polycyanurates modified with hydroxyl-terminated or cyanated poly (ether sulfone) [J]. Polymer, 2001, 42(4): 1525 -1532.
[8]  Suman N John, Kathi John, Tammishetti Shekharam. Thermoplastic modification of monomeric and partially polymerized bisphenol a dicyanate ester [J]. European Polymer Journal, 2005, 41(12): 2963-2972.
[9]  Tao Qingsheng, Gan Wenjun, Yu Yingfeng, et al. Viscoelastic effects on the phase separation in thermoplastics modified cyanate ester resin [J]. Polymer, 2004, 45(10): 3505 -3510.
[10]  Hamerton I, Herman H, Mudhar A K, et al. Multivariate analysis of spectra of cyanate ester/bismaleimide blends and correlations with properties [J]. Polymer, 2002, 43(11): 3381 -3386.
[11]  Lin Rong-Hsien, Lu Wei-Hua, Lina Chih-Wei. Cure reactions in the blend of cyanate ester with maleimide [J]. Polymer, 2004, 45(13): 4423 -4435.
[12]  李文峰. 改进的卤化氰-酚法合成氰酸酯研究 . 西安: 西北工业大学, 2004: 89 -91.
[13]  Bartonlomeo P, Chailan J F, Vernet J L. Curing of cyanate ester resin: A novel approach based on FTIR spectroscopy and comparison with other techniques [J]. European Polymer Journal, 2001, 4(37): 659 -670.
[14]  Grenier-Loustalot M F, Grenier P. A study of the mechanisms and kinetics of the molten state reaction of non-catalyzed cyanate and epoxy-cyanate systems [J]. European Polymer Journal, 1995, 11(31): 1139 -1153.
[15]  陈 平, 程子霞, 朱兴松, 等. 环氧树脂与氰酸酯共固化产物性能的研究 [J]. 复合材料学报, 2001, 18(3): 10 -13. Chen Ping, Cheng Zixia, Zhu Xingsong, et al. Study on the properties of cured compound in cyanate ester/epoxy co-curing system [J]. Acta Materiae Compositae Sinica, 2001, 18(3): 10 -13.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133