Biliba K, Arsene M A, Quensanga A. Sugar cane bagasse fibre reinforced cement composites, Part Ⅰ : Influence of the botanical components of bagasse on the setting of bagasse/cement composite [J]. Cement Concrete Compos, 2003, 25: 91 -96.
[2]
Paiva J M F, Frollini E. Sugarcane bagasse reinforced phenolic and lignophenolic composites [J]. J Appl Polym Sci, 2002, 83: 880 -888.
[3]
Hassan M L, Rowell R M, Fadl N A, et al. Thermoplasticization of bagasse, Ⅰ : Preparation and characterization of esterified bagasse fibers [J]. J Appl Polym Sci, 2000, 76: 561 -574.
[4]
Cao Y, Shibata S, Fukumoto I. Mechanical properties of biodegradable composites reinforced with bagasse fiber before and after alkali treatments [J]. Composites Part A, 2006, 37(3): 423 -429.
[5]
Cao Y, Shibata S, Fukumoto I. Fabrication and flexural properties of bagasse fibre reinforced biodegradable composites [J]. J Macromol Sci Part B: Phys, 2006, 45(4): 463 -474.
[6]
曹 勇, 柴田信一. 甘蔗渣的碱处理对其纤维增强全降解复合材料的影响 [J]. 复合材料学报, 2006, 23(3): 60 -66. Cao Yong, Shibata S. Effect of alkali treated bagasse fibres on fibre-reinforced biodegradable composites [J]. Acta Materiae Compositae Sinica, 2006, 23(3): 60 -66.
[7]
曹 勇, 陈鹤梅. 甘蔗渣纤维增强可降解复合材料的制备与弯曲模量的预测 [J]. 高分子材料科学与工程, 2006, 22(4): 188 -191. Cao Yong, Chen Hemei. Prediction of flexural modulus and preparation of bagasse fibre-reinforced biodegradable composites [J]. Polymer Materials Science & Engineering, 2006, 22(4), 188 -191.
[8]
刘容德. 注射工艺对聚丙烯性能的影响 [J]. 塑料科技, 2002(6): 27 -30. Liu Derong. Influence of injection process on properties of polypropylene [J]. Plastics Science and Technology, 2002(6): 27 -30.
[9]
曹民干. 注射工艺条件对PP成型收缩率的关系 [J]. 工程塑料应用, 2002, 30(1): 21 -23. Cao Mingan. Relation between the injection conditions and shrinkage for PP process [J]. Engineering Plastics Application, 2002, 30(1): 21 -23.
[10]
Hassan M L, Nada A M A. Utilization of lignocellulosic fibers in molded polyester composites [J]. J Appl Polym Sci, 2003, 87(4): 653 -660.
[11]
Saheb D N, Jog J P. Advanced natural fiber polymer composites: A review [J]. Adv Polym Tech, 1999, 18(4), 351 -363.
