全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

载气对C/C复合材料CVI热解炭显微结构的影响

, PP. 87-92

Keywords: 热梯度CVI,C/C复合材料,热解炭,显微结构

Full-Text   Cite this paper   Add to My Lib

Abstract:

在1000℃,0.5kPa丙烯分压条件下,以N2、H2为载气和无载气情况下于热梯度CVI炉中制备了C/C复合材料,研究了载气特别是氢气对材料基体热解炭显微结构的影响。通过偏光显微镜测定材料不同区域CVI热解炭的消光角,分析热解炭显微结构在试样中的分布规律。结果表明:N2在CVI过程中充当惰性角色,不影响热解炭的显微结构;H2可以调节热解炭沉积时的微环境气氛,更有利于得到粗糙层结构热解炭。试样增密延长炭源气滞留时间,引起带状结构热解炭中显微结构的突变。借助氢气作为载气,可以实现对C/C复合材料中热解炭显微结构的更优控制。

References

[1]  汤中华,邹志强,熊 杰.用CVI增密技术制备航空刹车用C/C复合材料[J].中南工业大学学报,2002,33 (4):380-384.
[2]  邹志强,熊 杰,汤中华,等.用于盘形多孔性工件增密的化学气相沉积的方法及装置 .中国专利,00114790.0.2000-07-18.
[3]  McAllister P, Hendricks J F, Wolf E E. The influence of carbon fiber belts and composites by pyrolytic carbon deposition from propylene[J]. Carbon, 1990, 28 (4):579-588.
[4]  Benzinger W,Hüttinger K J.Chemistry and kinetics of chemical vapour infiltration of pyrocarbon Ⅵ : Mechanical and structure properties of infiltrated carbon fiber felt[J]. Carbon, 1999, 37:1311-1322.
[5]  于 澍,刘根山,李溪滨,等.不同C/C复合材料飞机刹车盘基本性能的对比分析[J].复合材料学报,2003,20(3):35-40.
[6]  Lieberman M L, Pierson H O. Effect of gas phase conditions on resultant matrix pyrocarbons in carbon/carbon composites[J]. Carbon, 1974, 12:233-241.
[7]  张福勤,黄启忠,黄伯云,等.C/C复合材料结构显微激光喇曼光谱研究[J].复合材料学报,2003,20 ( 3):113-117.
[8]  Pierson H O, Lieberman M L. The chemical vapor deposition of carbon on carbon fibers[J]. Carbon, 1973, 11:177-187.
[9]  Antes J, Hu Z, Zhang W, et al. Chemistry and kinetics of chemical vapour deposition of pyrocarbon Ⅶ : Confirmation of the influence of the substrate surface area/reactor volume ratio[J]. Carbon, 1999,37:2031-2039.
[10]  刘文川,董林清.化学气相沉积碳-碳复合材料工艺参数、结构性能的研究[J].电磁技术,1981 (1):17-29.
[11]  邹志强,汤中华,熊 杰.用热梯度式CVD增密技术制造C/C复合刹车盘[J].新型炭材料,2000,15 (2):22-27.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133