Paulmier T, Balat-Pichelin M, Le Quéau D. Structural modification of carbon-carbon composites under high temperature and ion irradiation [J]. Applied Surface Science,2005,243(1/4): 376 -393.
[2]
黄海明, 杜善义, 吴林志, 等. C/C复合材料烧蚀性能分析 [J]. 复合材料学报, 2001, 18(3): 76 -80. Huang Haiming, Du Shanyi, Wu Linzhi, et al. Analysis of ablation of C/C composites [J]. Acta Materiae Compositae Sinica, 2001, 18(3): 76 -80.
[3]
苏君明. C/C喉衬材料的研究与发展 [J]. 炭素科技, 2001, 1(1): 6 -11. Su Junming.Research and development of C/C composites for nozzles [J]. Carbon Science and Technology, 2001, 1(1): 6 -11.
[4]
陈林泉, 李岩芳, 侯 晓, 等. 喷管收敛段与喉部型面对喷管流量的影响 [J]. 固体火箭技术, 2002, 25(1): 10 -19. Chen Linquan, Li Yanfang, Hou Xiao, et al.Effects of nozzle contour in convergent section and throat on mass flow rate [J]. Journal of Solid Rocket Technology, 2002, 25(1): 10 -19.
[5]
Lee Young-Jae, Joo Hyeok Jong. Investigation on ablation behavior of CFRC composites prepared at different pressure [J]. Composites Part A, 2004, 35(11): 1285 -1290.
[6]
Zien T F. Thermal effects of particles on hypersonic ablation, AIAA-2001-2833 . Anaheim: AIAA, 2001.
[7]
Williams S D, Curry D M, Chao D C.Ablation analysis of the shuttle orbiter oxidation protected reinforced carbon-carbon, AIAA-94-2084 .Colorado Springs: AIAA, 1994.
[8]
Bunker Robert C, Prince Andrew. Hybrid rocket motor nozzle material predictions and results, AIAA-92-3591 . Nashville: AIAA, 1992.
[9]
刘建军, 苏君明, 陈长乐. 炭/炭复合材料烧蚀性能影响因素分析 [J]. 炭素, 2003(2): 15 -19. Liu Jianjun, Su Junming, Chen Changle. Study on factors affecting ablative performance of C/C composites [J]. Carbon, 2003(2): 15 -19.
[10]
Cho Bong-Hwan, Byung Il-Yoon. Microstructural interpretation of the effect of various matrices on the ablation performances of carbon fiber-reinforced composites [J]. Composites Science and Technology, 2001, 61(2): 271 -280.
[11]
冉宏星, 崔 红, 郝志彪,等.炭基体结构状态对C/C复合材料抗烧蚀性能的影响 [J]. 炭素, 2002(4): 20 -25. Ran Hongxing, Cui Hong, Hao Zhibiao,et al. Influence of carbon-matrix structure on antiablative performances of C/C composites [J]. Carbon, 2002(4): 20 -25.
[12]
崔 红, 苏君明, 李瑞珍,等. 添加难熔金属碳化物提高C/C复合材料抗烧蚀性能的研究 [J]. 西北工业大学学报, 2000, 18(4): 669 -673. Cui Hong, Su Junming, Li Ruizhen, et al. On improving anti-ablation property of multi-matrix C/C to withstand 3700 K [J]. Journal of Northwestern Polytechnical University, 2000,18(4): 669 -673.
