Luo J T, Zhao S J, Zhang C X. Microstructure of aluminum/copper clad composite fabricated by casting-cold extrusion forming [J]. Journal of Central South University of Technology, 2011, 18(4): 1013-1017.
[2]
徐 岩, 骆俊廷, 贾建波. 低压压铸-冷挤压法制备铜包铝线的研究 [J]. 中国机械工程, 2009, 20(22): 2755-2758. Xu Yan, Luo Junting, Jia Jianbo. Study on the fabrication of aluminum/copper clad composite by low-pressure compression casting-cold extrusion technology [J]. China Mechanical Engineering, 2009, 20(22): 2755-2758.
[3]
徐高磊, 张迎晖, 林木法, 等. 铜铝复合材料的研究与应用 [J]. 有色金属加工, 2008, 37(4): 6-9. Xu Gaolei, Zhang Yinghui, Lin Mufa, et al. Overview of research and applications of copper/aluminum clad materials [J]. Nonferrous Metals Processing, 2008, 37(4): 6-9.
[4]
Li X B, Zu G Y, Ding M M, et al. Interfacial microstructure and mechanical properties of Cu/Al clad sheet fabricated by asymmetrical roll bonding and annealing [J].Materials Science and Engineering, 2011, 529 (25): 485-491.
[5]
吴永福, 刘新华, 谢建新. 矩形断面铜包铝连铸坯轧制成形导电扁排的工艺及性能 [J]. 北京科技大学学报, 2012, 34(11): 1301-1307. Wu Yongfu, Liu Xinhua, Xie Jianxin. Rolling process and properties copper cladding aluminum flat bars using continuous casting bars with the rectangle section [J]. Journal of University of Science and Technology Beijing, 2012, 34(11): 1301-1307.
[6]
刘 理. 铜/铝复合板轧制工艺与理论研究 [D]. 沈阳: 东北大学, 2006. Liu Li. Research on rolling process and theory of Cu/A1 rolling clad sheet [D]. Shenyang: Northeastern University, 2006.
[7]
李宝绵, 许光明, 崔建忠. 对称复合板冷轧变形模式的上限分析 [J]. 复合材料学报, 2004, 21(3): 120-123. Li Baomian, Xu Guangming, Cui Jianzhong. An upper bound analysis of the deformation mode of cold sandwich rolling [J].Acta Materiae Compositae Sinica, 2004, 21(3): 120-123.
[8]
王小红, 唐 荻, 许荣昌, 等. 铝-铜轧制复合工艺及界面结合机理 [J]. 有色金属, 2007, 59(1): 21-24. Wang Xiaohong, Tang Di, Xu Rongchang, et al. Al-Cu compound and bonding mechanism by rolling process [J]. Nonferrous Metals, 2007, 59(1): 21-24.
[9]
Robert U. The effect of rolling direction on the creep process of Al–Cu bimetallic sheet [J]. Materials & Design, 2013, 49: 693-700.
[10]
段小勇. 金属压力加工理论基础 [M]. 北京: 冶金工业出版社, 2004: 205-215. Duan Xiaoyong. Theoretical basis of metal pressure processing [M]. Beijing: Metallurgical Industry Press, 2004: 205-215.
