Garlotta D. A literature review of poly (lactic acid) [J]. Journal of Polymer and the Environment, 2001, 9(2): 63-84.
[3]
Mehta R, Kumar V, Bhunia H, et al. Synthesis of poly (lactic acid): a review [J]. Journal of Macromolecular Science, Part C: Polymer Reviews, 2005, 45(4): 325-349.
[4]
Wang H, Sun X Z, Seib P. Strengthening blends of poly (lactic acid) and starch with methylenediphenyl diisocyanate [J]. Journal of Applied Polymer Science, 2001, 82(7): 1761-1767.
[5]
Zhang J F, Sun X Z. Mechanical properties of poly(lactic acid)/starch composites compatibilized by maleicanhydride[J]. Biomacromolecules, 2004, 5(4): 1446-1451.
[6]
Wang N, Yu J G, Ma X F. Preparation and characterization of thermoplastic starch/PLA blends by one-step reactive extrusion [J]. Polymer International, 2007, 56(11): 1440-1447.
[7]
何东保, 李 青. 直链淀粉和MAH酯的合成及性能研究[J]. 武汉大学学报: 理学版, 2003, 49(2): 193-196. He Dongbao, Li Qing. Study on synthesis of amylose maleic ester and its properties [J]. Journal of Wuhan University: Natural Science Edition, 2003, 49(2): 193-196.
[8]
Huang L, Xiao C M, Chen B X. A novel starch-based adsorbent for removing toxic Hg(II) and Pb(II) ions from aqueous solution [J]. Journal of Hazardous Materials, 2011, 192(2): 832-836.
[9]
王金玲. 淀粉酯化及酯化淀粉/PCL共混物性能研究 [D]. 武汉: 华中农业大学, 2006. Wang Jinling. Study on esterifilation of starch and esterified starch/PCL blends [D]. Wuhan: Huazhong Agricultural University, 2006.
[10]
Xing G X, Zhang S F, Ju B Z, et al. Microwave-assisted synthesis of starch maleate by dry method [J]. Starch/Starke, 2006, 58(9): 464-467.
[11]
Zuo Y F, Gu J Y, Yang L, et al. Synthesis and characterization of maleic anhydride esterified cornstarch by the dry method [J]. International Journal of Biological Macromolecules, 2013, 62: 241-247.
[12]
国家质量技术监督局. GB/T 3682—2000热塑性塑料熔体质量流动速率和熔体体积流动速率的测定 [S]. 北京: 中国标准出版社, 2000. China State Bureau of Quality and Technical Supervision. GB/T 3682-2000 Determination of the melt mass-flow rate (MFT) and the melt volume-flow rate (MVT) of thermoplastics [S]. Beijing: Standards Press of China, 2000.
[13]
American Society for Testing and Materials International. ASTM D4440-08 Standard test method for plastics: dynamic mechanical properties melt rheology[S]. New York: ASTM International, 2008.
[14]
中华人民共和国国家质量监督检验检疫总局. GB/T 1040-1992塑料拉伸性能试验方法 [S]. 北京: 中国标准出版社, 1992. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. GB/T 1040-1992 Plastics-determination of tensile properties [S]. Beijing: Standards Press of China, 1992.
[15]
中华人民共和国国家质量监督检验检疫总局. GB/T 9341-2008塑料弯曲性能的测定 [S]. 北京: 中国标准出版社, 2008. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. GB/T 9341-2008 Plastics-determination of flexural properties[S]. Beijing: Standards Press of China, 2008.
[16]
中华人民共和国国家质量监督检验检疫总局. GB/T 1034-2008塑料吸水性的测定 [S]. 北京: 中国标准出版社, 2008. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. GB/T 1034-2008 Plastics-determination of water absorption [S]. Beijing: Standards Press of China, 2008.
[17]
Dontulwar J R, Borikar D K, Gogte B B. An esteric polymer synthesis and its characterization using starch, glycerol and maleic anhydride as precursor [J]. Carbohydrate Polymers, 2006, 65(2): 207-210.
[18]
Ma X F, Chang P R, Yu J G, et al. Preparation and properties of biodegradable poly (propylene carbonate)/thermoplastic dried starch composites [J]. Carbohydrate Polymers, 2008, 71(2): 229-234.
[19]
由英才, 朱常英, 焦京亮, 等. 淀粉/DL-丙交酯接枝共聚物的合成和生物降解性能研究 [J]. 高分子学报, 2000, 12(6): 746-750. You Yingcai, Zhu Changying, Jiao Jingliang, et al. Study on synthesis and biodegradability of starch/DL-lactide grafting copolymer [J]. Acta Polymerica Sinica, 2000, 12(6): 746-750.
[20]
Sagar A D, Merril E W. Properties of fatty-acid esters of starch [J]. Journal of Applied Polymer Science, 1995, 58(9): 1647-1652.
[21]
涂克华, 王利群, 王焱冰. 淀粉接枝共聚物在淀粉/PLA共混体系中的作用 [J]. 高分子材料科学与工程, 2002, 18(5): 108-114. Tu Kehua, Wang Liqun, Wang Yanbing. The role of starch graft copolymers in starch/PLA blends [J]. Polymer Materials Science and Engineering, 2002, 18(5): 108-114.
[22]
Tsuji H, Ikada Y. Blends of crystalline and amorphous poly (lactide). III. Hydrolysis of solution-cast blend films [J]. Journal Applied Polymer Science, 1997, 63(7): 855-863.
[23]
Maiti S N, Hassan M R. Melt rheological properties of polypropylene–wood flour composites [J]. Journal of Applied Polymer Science, 1989, 37(7): 2019-2032.
[24]
王全华, 付中玉. 熔融指数对聚丙烯熔体流动性及纤维强度的影响 [J]. 北京服装学院学报, 2004, 24(4): 27-31. Wang Quanhua, Fu Zhongyu. The influence of melt index on flowing behavior of polypropylene and the tenacity of the produced fibers [J]. Journal of Beijing Institute of Clothing Technology, 2004, 24(4): 27-31.
[25]
费传军, 赵 谦, 周昌玉, 等. 聚丙烯熔融指数对GMT 力学性能的影响 [J]. 玻璃纤维, 2007(2): 10-15. Fei Chuanjun, Zhao Qian, Zhou Changyu, et al. Effect of PP melt index on the mechanical properties of GMT [J]. Fiber Glass, 2007(2): 10-15.
[26]
徐配弦. 高聚物流变学及其应用 [M]. 北京: 化学工业出版社, 2003: 8-11. Xun Peixuan. Polymer rheology and applications [M]. Beijing: Chemistry Industry Press, 2003: 8-11.
[27]
Cassagnau P, Melis F. Non-linear viscoelastic behaviour and modulus recovery in silica filled polymers [J]. Polymer, 2003, 44(21): 6607-6615.
[28]
舒文艺, 金日光. CPE 对PVC/PP 体系流变性能的影响 [J]. 高分子材料科学与工程, 1992, 3(3): 57-60. Shu Wenyi, Jin Riguang. The influences of CPE on the rheological property of PVC/PP blends [J]. Polymer Materials Science and Engineering, 1992, 3(3): 57-60.
[29]
樊国栋, 陈春兰, 刘香云, 等. 聚乙二醇改性PLA的合成与性能表征 [J]. 功能材料, 2010, 41(2): 238-240. Fan Guodong, Chen Chunlan, Liu Xiangyun, et al. Synthesis and characterization of poly(ethyleneglyeol) modified poly(lactide) [J]. Journal of Functional Materials, 2010, 41(2): 238-240.
[30]
Klug H P, Alezander L E. X-ray diffraction procedures for poly-crystalline and amorphous material [M]. New York: Wily-Interscience, 1974: 74-89.
