Everage A E. Theory of stratified bicomponent flow of polymer melts. II. interface motion in transient flow [J]. Transactions of the Society of Rheology, 1975, 19(4): 509-522.
[2]
Lee J, Allen J S, Gupta M. Observations of liquid-liquid encapsulation in coextrusion of inelastic Newtonian fluids[C]//69th Annual Technical Conference of the Society of Plastics Engineers, 2011: 1360-1366.
[3]
Dooley J, Hyun K S, Hughes K. An experimental study on the effect of polymer viscoelasticity on layer rearrangement in coextruded structures [J]. Polymer Engineering and Science, 1998, 38(7): 1060-1071.
[4]
Huntington B A, Chabert E, Rahal S, et al. Distortion of interfaces in a multilayer polymer coextrusion feedblock[J]. International Polymer Processing, 2013, 28(3): 274-280.
[5]
周国发, 胡全连. 聚合物多相分层充模流动成型的粘性包围形成机理数值分析[J]. 中国塑料, 2003, 28(8): 60-65. Zhou Guofa, Hu Quanlian. Numerical analysis of initiating mechanism of viscous encapsulation in polymer multiphase-multilayer cavity filling flow molding[J]. China Plastics, 2003, 28(8): 60-65.
[6]
Yue P, Zhou C, Dooley J, et al. Elastic encapsulation in bicomponent stratified flow of viscoelastic fluids [J]. Journal of Rheology, 2008, 52(4): 1027-1042.
[7]
Borzacchiello D. Three-dimensional numerical simulation of encapsulation in polymer coextrusion[D]. Saint Etienne: Jean Monnet University, 2012.
[8]
Borzacchiello D, Leriche E, Blottière B, et al. Three-dimensional finite volume computation of viscoelastic fluid encapsulation by phase-field modeling[J]. Journal of Non-Newtonian Fluid Mechanics, 2013, 200: 52-64.
[9]
Rajagopalan D, Arrmstrong R C, Brown R A. Finite element methods for calculation of steady viscoelastic flow using constitutive equations with a Newtonian viscosity [J]. Journal of Non-Newtonian Fluid Mechanics, 1990, 36(1): 159-192.
[10]
Avino G D, Maffettonne P L, Hulsen M A, et al. Numerical simulation of planar elongational flow of concentrated rigid particle suspensions in a viscoelastic fluid [J]. Journal of Non-Newtonian Fluid Mechanics, 2008, 150(2-3): 65-79.
[11]
周国发, 孙 懋. 聚合物全三维非稳态非等温多相分层流动成型过程的理论模型和数值模拟 [J]. 机械工程学报, 2004, 40(9): 16-24. Zhou Guofa, Sun Mao. 3D-dimensional unsteady non-isothermal theoretical model and simulation of polymer multiphase-multilayer flow molding[J]. Journal of Mechanical Engineering, 2004, 40(9): 16-24.
[12]
周文彦, 周国发. 聚合物多层气辅共挤精密成型机制的数值分析 [J]. 复合材料学报, 2009, 26(3): 90-98. Zhou Wenyan, Zhou Guofa. Numerical investigation on the mechanism of polymer multilayer gas assisted co-extrusion precision molding process [J]. Acta Materiae Compositae Sinica, 2009, 26(3): 90-98.
[13]
Bhatara G. A computational study of the effects of viscoelasticity on the interfacial dynamics of free surface displacement flows [D]. Stanford: Stanford University, 2004.
[14]
Holmes L T, Fávero J L, Osswald T A. Modeling viscoelastic secondary flows in three-dimensional noncircular ducts [J]. Polymer Engineering and Science, 2012, 52(8):1715-1723.
[15]
Yue P T, Dooley J, Feng J J. A general criterion for viscoelastic secondary flow in pipes of noncircular cross section [J]. Journal of Rheology, 2008, 52(1): 315-332.
[16]
Debbaut B, Avalosse T, Dooley J, et al. On the development of secondary motions in straight channels induced by the second normal stress difference: experiments and simulations[J]. Journal of Non-Newtonian Fluid Mechanics, 1997, 69(2-3): 255-271.
[17]
Xue S C, Phan Thien N, Tanner R I. Numerical study of secondary flows of viscoelastic fluid in straight pipes by an implicit finite volume method [J]. Journal of Non-Newtonian Fluid Mechanics, 1995, 59(2-3): 191-213.
[18]
Hashemabadi S H, Etemad S G. Effect of rounded corners on the secondary flow of viscoelastic fluids through non-circular ducts [J]. International Journal of Heat and Mass Transfer, 2006, 49(11-12): 1986-1990.
