Lorca J L, Orera V M. Directionally solidified eutectic ceramic oxides [J]. Progress in Materials Science, 2006, 51(6): 711-809.
[2]
吴 江, 赵忠民, 张 龙, 等. 燃烧合成原位增韧氧化铝基复合陶瓷的显微结构与力学性能 [J]. 军械工程学院学报, 2007, 19(4): 67-71. Wu Jiang, Zhao Zhongmin, Zhang Long, et al. Microstructures and mechanical properties for in-situ toughening alumina matrix composite ceramics fabricated by combustion synthesis [J]. Journal of Ordnance Engineering College, 2007, 19(4): 67-71.
[3]
宋亚林, 赵忠民, 张 龙, 等. 超重力对燃烧合成Al2O3/ZrO2(4Y)的影响 [J]. 稀有金属材料与工程, 2009, 38(A02): 94-97. Song Yalin, Zhao Zhongmin, Zhang Long, et al. Influences of high gravity on Al2O3/ZrO2(4Y) prepared by combustion synthesis [J]. Rare Metal Materials and Engineering, 2009, 38(A02): 94-97.
[4]
Michael L P, Hugh A B. Pressureless sintering of particle-reinforced metal-ceramic composites for functionally graded materials: Part I. Porosity reduction models [J]. Acta Materialia, 2006, 54(6): 1457-1465.
[5]
李 斌, 许庆彦, 李旭东, 等. Al-Si/SiCp复合材料微观组织模拟及颗粒分布均匀性定量预测 [J]. 机械工程学报, 2007, 43(1): 202-207. Li Bin, Xu Qingyan, Li Xudong, et al. Microstructure simulation of Al-Si/SiCp composites and quantitative assessment of paticle distribution homogeneity [J]. Journal of Mechanical Engineering, 2007, 43(1): 202-207.
[6]
Tsuji T, Ito A, Tanaka T. Multi-scale structure of clustering particles [J]. Powder Technology, 2008, 179(3): 115-125.
[7]
Zhang T Q, Wang Y J, Zhou Y, et al. Effect of particle clustering on the effective modulus of ZrC/W composites [J]. International Journal of Refractory Metals & Hard Materials, 2009, 27(1): 14-19.
[8]
Dorey R A, Yeomans J A, Smith P A. Effect of pore clustering on the mechanical properties of ceramics [J]. Journal of the European Ceramic Society, 2002, 22(4): 403-409.
[9]
薛侃时, 王 滨, 李 晋, 等. 高锰奥氏体超低温钢低温脆断机制的研究 [J]. 机械工程学报, 1998, 34(5): 1-6. Xue Kanshi, Wang Bin, Li Jin, et al. Study on low temperature brittle fracture of high manganese austenitic cryogenic steels [J]. Journal of Mechanical Engineering, 1998, 34(5): 1-6.
[10]
Li G Q, Zhao Y, Pang S S. Analytical modeling of particle size and cluster effects on particulate-filled composite [J]. Materials Science and Engineering, 1999, 271(1-2): 43-52.
[11]
Estevez R, Maire E, Franciosi P, et al. Effect of particle clustering on the strengthening versus damage rivalry in particulate reinforced elastic plastic materials: A 3-D analysis from a self-consistent modeling [J]. European Journal of Mechanics A-Solids, 1999, 18(5): 785-804.
[12]
付云伟, 刘协权, 倪新华, 等. 含固有缺陷复合材料有效弹性性能预报 [J]. 机械工程学报, 2012, 48(16): 46-51. Fu Yunwei, Liu Xiequan, Ni Xinhua, et al. Effective elastic property prediction of ceramic composite with inherent defect [J]. Journal of Mechanical Engineering, 2012, 48(16): 46-51.
[13]
王志平, 程涛涛, 丁坤英. 颗粒致密度对WC-10Co-4Cr涂层性能的影响 [J]. 机械工程学报, 2011, 47(24): 63-68. Wang Zhiping, Cheng Taotao, Ding Kunying. Effect of particle-density on the performance of WC-10Co-4Cr coating [J]. Journal of Mechanical Engineering, 2011, 47(24): 63-68.
[14]
Zheng Q S, Du D X. An explicit and universally applicable estimate for the effective properties of multiphase composites which accounts for inclusion distribution [J]. Journal of the Mechanics and Physics of Solids, 2001, 49(11): 2765-2788.
[15]
马义德. 脉冲耦合神经网络与数字图像处理 [M]. 北京: 科学出版社, 2008: 190-200. Ma Yide. Pulse coupled neural network and digital image processing [M]. Beijing: Science Press, 2008: 190-200.
[16]
Mura T. Micromechanics of defects in solids [M]. 2nd ed. Lancaster: Martinus Nijhoff Publishers, 1987: 196.
