二维编织复合材料圆柱曲板屈曲性能试验与有限元分析
Test and finite element analysis of buckling performance for 2D textile composite cylindrical curved panels

DOI: 10.13801/j.cnki.fhclxb.20141021.005

Keywords: 编织材料,屈曲,试验,有限元分析,模态
weaving material,buckling,test,finite element analysis,mode

Full-Text   Cite this paper   Add to My Lib

Abstract:

References

[1]	Zhang P, Gui L J, Fan Z J. Experimental investigation on the energy absorption characteristic of braided composite circular tubes subjected to quasi-static axial compression[J]. Acta Materiae Compositae Sinica, 2007,24(1): 146-150(in Chinese). 张平,桂良进,范子杰. 编织复合材料圆管准静态轴向压缩吸能特性的试验研究[J]. 复合材料学报, 2007,24(1): 146-150.
[2]	Zhang C, Xu X W, Guo S X. Microstructure model and finite element analysis of mechanical properties of 2D 1×1 biaxial braided composites[J]. Acta Materiae Compositae Sinica, 2011, 28(6): 215-222(in Chinese). 张超, 许希武, 郭树祥. 二维二轴1×1编织复合材料细观结构模型及力学性能有限元分析[J]. 复合材料学报, 2011, 28(6): 215-222.
[3]	Gu B H, Xu J Y. Finite element calculation of a 3-d braided composite under ballistic penetration at quasi-microstructure hierarchy[J]. Acta Materiae Compositae Sinica, 2004, 21(3): 84-90(in Chinese). 顾伯洪, 徐静怡. 三维编织复合材料弹道侵彻准细观层次有限元计算[J]. 复合材料学报, 2004, 21(3): 84-90.
[4]	Li Z M. Buckling analysis of three dimensional braided composite cylindrical shells under axial compression[J]. Structure & Environment Engineering, 2007, 34(4): 14-21(in Chinese). 李志敏. 三维编织复合材料圆柱壳轴压下的屈曲分析[J]. 强度与环境, 2007, 34(4): 14-21.
[5]	Shen H S. Buckling and postbuckling of moderately thick plates[J]. Applied Mathematics and Mechanics, 1990, 11(4): 341-350(in Chinese). 沈惠申. 中厚板的弹性屈曲和后屈曲[J]. 应用数学和力学, 1990, 11(4): 341-350.
[6]	Yang D S, Liao Y, Huang Y. The stability analysis for orthotropic thin plates[J]. Engineering Mechanics, 2002, 19(3): 55-58(in Chinese). 杨端生, 廖瑛, 黄炎. 正交异性矩形薄板的稳定性分析[J]. 工程力学, 2002, 19(3): 55-58.
[7]	American Society for Testing and Materials International. ASTM D3039/D3039M - 14 Standard test method for tensile properties of polymer matrix composite materials[S]. West Conshohocken: ASTM International, 2014.
[8]	American Society for Testing and Materials International. ASTM D7264/D7264M-07 Standard test method for flexural properties of polymer matrix composite materials[S]. West Conshohocken: ASTM International, 2014.
[9]	American Society for Testing and Materials International. ASTM D2344/D2344M-13 Standard test method for short-beam strength of polymer matrix composite materials and their laminates[S]. West Conshohocken: ASTM International, 2014.
[10]	Du S Y.Advanced composite materials and aerospace engineering[J].Acta Materiae Compositae Sinica, 2007, 24(1): 1-12(in Chinese). 杜善义.先进复合材料与航空航天[J].复合材料学报, 2007, 24(1): 1-12.
[11]	Lu Z X, Yang Z Y, Li Z P. Development of investigation into mechanical behaviour of three dimensional braided composites[J]. Acta Materiae Compositae Sinica, 2004, 21(2): 1-7(in Chinese). 卢子兴, 杨振宇, 李仲平. 三维编织复合材料力学行为研究进展[J]. 复合材料学报, 2004, 21(2): 1-7.
[12]	Li J, Jiao G Q, Wang B, et al. A non-linear damage constitutive model for 2D woven C/SiC composite material and its application[J]. Acta Materiae Compositae Sinica, 2013, 30(1): 165-171(in Chinese). 李俊, 矫桂琼, 王波, 等. 二维编织 C/SiC 复合材料非线性损伤本构模型与应用[J]. 复合材料学报, 2013, 30(1): 165-171.
[13]	Li M, Chen X H, Wang H. Evaluating the mechanical behavior of 2D woven fabric composite by domain decomposition method[J]. Acta Materiae Compositae Sinica, 2012, 29(6): 197-205(in Chinese). 李明, 陈秀华, 汪海. 二维平纹机织复合材料弹性性能预测的域分解方法[J]. 复合材料学报, 2012, 29(6): 197-205.
[14]	Xu J Y, Gu B H. Damage pattern and failure mode of 3-d braided composites under ballistic impact[J]. Journal of Ballistics, 2002,14(2):39-43(in Chinese). 徐静怡, 顾伯洪. 编织复合材料弹道冲击破坏形态及模式[J]. 弹道学报, 2002, 14(2): 39-43.
[15]	Wang L P, Yan Y. Micro analysis and experimental study of the elastic properties of braided composites structure[J]. Acta Materiae Compositae Sinica, 2004, 21(4): 152-156(in Chinese). 王立朋, 燕瑛. 编织复合材料弹性性能的细观分析及试验研究[J]. 复合材料学报, 2004, 21(4): 152-156.
[16]	He H. Stability analysis of braid composite cylindrical shell [D]. Changsha: National University of Defense Technology, 2003(in Chinese). 何煌. 编织复合材料圆柱壳的稳定性分析[D]. 长沙: 国防科学技术大学, 2003.
[17]	Jones R M. Buckling of circular cylindrical shells with multiple orthotropic layers and eccentric stiffeners [J]. AIAA Journal,1968,6(12):2301-2305.
[18]	Almroth B O. Influence of edge conditions on the stability of axially compressed cylindrical shells[J]. AIAA Journal,1966,4(1):134-140.
[19]	Li Z M, Shen H S. Buckling of 3D braided composite cylindrical shells under external pressures[J]. Chinese Journal of Solid Mechanics, 2008, 29(1):52-58(in Chinese). 李志敏, 沈惠申. 三维编织复合材料圆柱壳在外压作用下的屈曲分析[J]. 固体力学学报, 2008, 29(1): 52-58.

Full-Text