范玉青, 张丽华. 超大型复合材料机体部件应用技术的新进展: 飞机制造技术的新跨越 [J]. 航空学报, 2009, 30(3): 534-543. Fan Yuqing, Zhang Lihua. New development of extra large composite aircraft components application technology: Advance of aircraft manufacture technology [J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(3): 534-543.
[3]
益小苏, 许亚洪, 唐邦铭, 等. 复合材料结构-功能一体化技术与吸能结构的研究 [J]. 材料工程, 2004(9): 3-8. Yi Xiaosu, Xu Yahong, Tang Bangming, et al. Study on energy absorption behavior of composite tubes and integrated manufacturing of composite structure [J]. Journal of Materials Engineering, 2004(9): 3-8.
[4]
Dexter H B. Development of textile reinforced composites for aircraft structures //4th International Symposium for Textile Composites. Kyoto: Kyoto Institute of Technology, 1998: 12-14.
[5]
Qi B, Raju J, Kruckenberg T, et al. A resin film infusion process for manufacture of advanced composite structures [J]. Composite Structures, 1999, 47: 471-476.
[6]
Teufel P, Maxwell M, Gardiner R. Low cost composite manufacturing method for a general aviation aircraft wing // AIAA/ICAS International Air and Space Symposium and Exposition—The Next 100 Year. Ohio: Dayton, 2003: 1-10.
[7]
刘兵山, 燕 瑛, 钱 卫, 等. 复合材料机翼盒段的设计、 模态分析和试验 [J]. 北京航空航天大学学报, 2003, 29(11): 1026-1028. Liu Bingshan, Yan Ying, Qian Wei, et al. Design, modal analysis and tests of composites wing box [J]. Journal of Beijing University of Aeronautics and Astronautics, 2003, 29(11): 1026-1028.
[8]
段跃新, 孙玉敏, 张佐光. RTM工艺工字梁构件的模拟与实验研究 [J]. 航空学报, 2006, 27(6): 1223-1228. Duan Yuexin, Sun Yumin, Zhang Zuoguang. Study on simulation and experimentation of H wallboard for RTM processing [J]. Acta Aeronautica et Astronautica Sinica, 2006, 27(6): 1223-1228.
[9]
邱婧婧, 段跃新, 梁志勇. RTM工艺参数对树脂充模过程影响的模拟与实验研究 [J]. 复合材料学报, 2004, 21(6): 70-74. Qiu Jingjing, Duan Yuexin, Liang Zhiyong. Computer simulation and actual experiments of RTM mold filling process affected by processing parameters [J]. Acta Materiae Compositae Sinica, 2004, 21(6): 70-74.
[10]
姚福军, 段跃新, 肇 研. RTM 工艺树脂注射温度优化 [J].复合材料学报, 2007, 24(3): 105-108. Yao Fujun, Duan Yuexin, Zhao Yan. Optimization of resin injection temperature for RTM process [J]. Acta Materiae Compositae Sinica, 2007, 24(3): 105-108.
[11]
吴晓青, 李嘉禄. 基于单向流动研究三维编织预制件的渗透型 [J]. 复合材料学报, 2007, 24(3): 116-120. Wu Xiaoqing, Li Jialu. Permeability of 3D braided preform based on unidirectional flow measurement [J]. Acta Materiae Compositae Sinica, 2007, 24(3): 116-120.
[12]
戴福洪, 张博明, 杜善义, 等. 复杂形状三维薄壁构件RTM制造工艺注模过程模拟 [J]. 复合材料学报, 2004, 21(2): 87-91. Dai Fuhong, Zhang Boming, Du Shanyi, et al. Simulation of mould filling in RTM process for 3D complex shape thin shell parts [J]. Acta Materiae Compositae Sinica, 2004, 21(2): 87-91.
[13]
戴福洪, 张博明, 杜善义. RTM工艺注模过程边缘效应模拟分析 [J]. 复合材料学报, 2004, 21(2): 161-167. Dai Fuhong, Zhang Boming, Du Shanyi. Simulation analysis of edge effects during mould filling in RTM process [J]. Acta Materiae Compositae Sinica, 2004, 21(2): 161-167.
[14]
戴福洪, 张博明, 杜善义, 等. 厚截面构件RTM注射工艺树脂流动过程模拟 [J]. 复合材料学报, 2004, 21(3): 6-10. Dai Fuhong, Zhang Boming, Du Shanyi, et al. Resin flow simulation in RTM process for thick section parts [J]. Acta Materiae Compositae Sinica, 2004, 21(3): 6-10.
[15]
白江波, 熊峻江, 程 序, 等. RTM成型复合材料T型接头工艺参数优化与力学性能实验研究 [J]. 复合材料学报, 2009, 26(3): 13-14. Bai Jiangbo, Xiong Junjiang, Cheng Xu, et al. Processing parameter optimization and experimental investigation on mechanical properties for RTM composite T-joint [J]. Acta Materiae Compositae Sinica, 2009, 26(3): 13-14.
[16]
Timothy G G. Advanced composites manufacturing [M]. New York: John Wiley & Sons, Inc., 1997: 426-438.
