Cheng H F, Han F S. Compressive deformation behavior and energy absorbing characteristic of open cell aluminum foam filled with silicate rubber [J]. Scripta Materialia, 2003, 49(6): 586-586.
[2]
Cheng H F, Huang X M, Xue G X, et al. Compressive deformation behavior and energy absorption characteristic of aluminum foam with elastic filler [J]. Trans Nonferrous Met Soc China, 2004, 14(5): 928-933.
[3]
Gibson L J. Modelling the mechanical behavior of cellular materials [J]. Material Science and Engineering A, 1989, 110: 1-36.
[4]
Banhart J. Manufacture, characterisation and application of cellular metals and metal foams[J]. Progress in Materials Science, 2001, 46: 559-632.
[5]
卢子兴, 王建华. 增强聚氨酯泡沫塑料力学行为的研究[J]. 复合材料学报, 1999, 16(2): 39-45. Lu Zixing, Wang Jianhua. Investigation into mechanical behavior of two reinforced foam plastics [J]. Acta Materiae Compositae Sinica, 1999, 16(2): 39-45.
Wei J N, Cheng H F, Gong C L, et al. Grain boundary peak in a foamed Zn-A1 eutectoid alloy[J]. Chinese Physics Letters, 2002, 19(3): 381-384.
[9]
刘培生. 多孔材料引论[M]. 北京: 清华大学出版社, 2004: 98-208.
[10]
赵万年, 赵乃勤, 郭新权. 新型功能材料泡沫铝的研究进展[J]. 金属热处理, 2004, 29(6): 7-11. Zhao Wannian, Zhao Naiqin, Guo Xinquan. Study progress for new type functional materials of foam aluminum [J]. Heat Treatment of Metals, 2004, 29(6): 7-11.
[11]
蒲怀强. 泡沫铝材料的工程应用研究 . 重庆: 重庆大学, 2005.
[12]
黄小清, 刘逸平, 汤立群, 胡玲玲, 张 红. 基于相对即时密度的泡沫铝材料力学性能研究[J]. 实验力学, 2004, 19(2): 170-177. Huang Xiaoqing, Liu Yiping, Tang Liqun, Hu Lingling, Zhang Hong. An experimental study on the mechanic behaviors of aluminum foam based on the relative current density[J]. Journal of Experimental Mechanics, 2004, 19(2): 170-177.
[13]
于英华, 杨春红. 泡沫铝夹芯结构的研究现状及发展方向 [J]. 机械工程师, 2006(3): 43-45. Yu Yinghua, Yang Chunhong. Study on the structure filled with aluminlum foam and its developing tendency [J]. Mechanical Engineer, 2006(3): 43-45.
[14]
梁晓军, 朱勇刚, 陈 峰, 等. 泡沫铝芯三明治板的粉末冶金制备及其板/芯界面研究 [J]. 材料科学与工程学报, 2005, 23(1): 77-80. Liang Xiaojun, Zhu Yonggang, Chen Feng, et al. Research on preparation of aluminium foam sandwich by powder metallurgical method and face plate／foam core interfacial microstructure [J]. Journal of Materials Science and Engineering, 2005, 23(1): 77-80.
[15]
Conde Y, Pollien A, Morternsen A. Functional grading of metal foam cores for yield-limited lightweight sandwich beams[J] . Scripta Mater, 2006, 54: 539-542.
