全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

数值模拟在金属基复合材料铸造性能研究上的应用

, PP. 89-94

Keywords: 金属基复合材料,颗粒增强,铸造性能,数值分析,二次开发

Full-Text   Cite this paper   Add to My Lib

Abstract:

研究了添加增强颗粒对复合材料铸造性能的影响。根据体积分数与各热物性参数之间的函ProCAST的数据库进行二次开发,建立了金属基复合材料的物性参数数据库,从而得到增强颗粒的合金成分对金属基复合材料的铸造性能的影响关系。以金属型重力铸造摩托车车轮为实际对象,研究为5%的Al2O3颗粒增强铝基复合材料Al2O3/A356.2的铸造性能。计算结果表明:加入颗粒后熔体粘度明显增加,导致复合材料流动性降低,轮辐、轮辋薄壁处均出现了收缩缺陷。通过在合金含量允许的范围内量ω(Si)=7.5%可以延长浇注温度到液相线温度的时间,同时降低结晶温度间隔,缩短固液共存时间潜热,从而提高熔体的流动性,增加补缩能力,使轮辐、轮辋薄壁位置的缩松、缩孔明显减少、消失。

References

[1]  [ 1 ] Pelleg J , Ashkenazi D. The influence of t hird element on t he interface reactions in metal composites : Al graphite system [J ] . Mater Sci Eng A , 2000 , 281 (1/ 2) : 239-247.
[2]  [ 2 ] Chen J K, Beraun J E. A simple model for interfacial phase growt h in metal mat rix composites [ J ] . Composites Part A ,2000 , 31 (7) : 727-731.
[3]  [ 3 ] 谢贤清 , 张 荻 , 刘金水. TiC/ Za43 复合材料的组织及热膨胀性能研究 [J ] . 热加工工艺 , 2001 (3) : 8-10.
[4]  Xie Xianqing , Zhang Di , Liu Jinshui . Study on microst ructure and t hermal expansion properties of TiC particulate reinforced ZA43 mat rix composite [ J ] . Hot Working Technology ,2001 (3) : 8-10.
[5]  [ 4 ] Orlave A. Sub grain size in view of composite model of dislocation st ructure [J ] . Mater Sci Eng A , 2001 , 297 (1/ 2) :281-285.
[6]  [ 5 ] Shangguan D , Ahuja S , Stefanescu D M. An analytical model for t he interaction between an insoluble particle and an advancing solid/ liquid interface [J ] . Metallurgical and Materials Transactions A , 1992 : 23 (2) : 669-680.
[7]  [ 6 ] Ravi K R , Pillai R M , Amaranat han K 2 R , Pai B C , Chakraborty M. Fluidity of aluminium alloys and composites : A review [J ] . Journal of Alloys and Composites , 2008 , 456(1/ 2) : 201-210.
[8]  [ 7 ] 赵玉涛 , 戴起勋 , 陈 刚. 金属基复合材料 [M] . 北京: 机械工业出版社 , 2007 : 22.
[9]  Zhao Yutao , Dai Qixun , Chen Gang. Metal mat rix composites [M] . Beijing : China Machine Press , 2007 : 22.
[10]  [ 8 ] 苏大为 , 赵玉涛 , 王雷刚. 前处理软件与 ProCAST的接口连接方式 [J ] . 特种铸造及有色合金 , 2007 , 27 (5) : 348-350.
[11]  Su Dawei , Zhao Yutao , Wang Leigang. Interface mode of preprocess sof tware and ProCAST sof tware [ J ] . Special Casting & Nonferrous Alloys , 2007 , 27 (5) : 348-350.
[12]  [ 9 ] 苏大为 , 赵玉涛. 低压铸造铝合金轮毂充型和凝固过程模拟分析 [J ] . 特种铸造及有色合金 , 2007 , 27 (9) : 682- 684.
[13]  Su Dawei , Zhao Yutao. Simulation of filling and solidification of aluminum alloy wheel in low pressure die casting [ J ] .Special Casting & Nonferrous Alloys , 2007 , 27 (9) : 682-684.
[14]  [ 10 ] Su Dawei , Zhao Yutao. Produces low pressure die casting aluminum alloy wheel aided by computer simulation [C] ∥The 5t h Sino-Korean Conference on Advanced Manufacturing Technology. Guangzhou : Key Laboratory for Advanced Materials of Ministly of Education , Tsinghua University & Sout h China University of Technology , 2007 : 48-54. [ 11 ] 罗启全. 铝合金熔炼与铸造 [M] . 广州: 广东科技出版社 ,2002 : 8-9.
[15]  Luo Qi2 quan. Smelting and foundry of aluminum [ M ] .Guangzhou : Guangdong Science & Technology Press , 2002 :8-9.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133