Ko F K, Du G W. Processing of textile preforms [M]//Gutowski T G, ed. Advanced Composites Manufacturing. New York: John Wiley & Sons Inc, 1997: 182-187.
[2]
Vaidya U K, Hosur M V, Earl D, Jeelani S. Impact response of integrated hollow core sandwich composite panels [J]. Compos Part A, 2000, 31(8): 761-772.
[3]
Tien W S, Yu H P. Low velocity impact responses of hollow core sandwich laminate and interply hybrid laminate [J]. Compos Struct, 2004, 64(8): 189-198.
[4]
Dasgupta A, Agarwal R K, Bhandarkar S M, Three-dimensional modeling of woven-fabric composites for effective thermo-mechanical and thermal properties [J]. Compo Sci Technol, 1996, 56(3): 209-223.
[5]
高爱君, 李 敏, 王绍凯, 张佐光. 三维间隔连体织物复合材料力学性能 [J]. 复合材料学报, 2008, 25(2): 87-93. Gao Aijun, Li Min, Wang Shaokai, Zhang Zuoguang. Experimental study on the mechanical characteristics of 3D spacer fabric composites [J]. Acta Materiae Compositae Sinica, 2008, 25(2): 87-93.
[6]
周光明, 钟志珊, 张立泉, 匡 宁. 整体中空夹层复合材料力学性能的实验研究 [J]. 南京航空航天大学学报, 2007, 39(1): 11-15. Zhou Guangming, Zhong Zhishan, Zhang Liquan, Kuang Ning. Experimental investigation on mechanical properties of hollow integrated sandwich composites [J]. Journal of Nanjing University of Aeronautics & Astronauties, 2007, 39(1): 11-15.
[7]
Vuure A W, Ivens J A, Verpoest I. Mechanical properties of composite panels based on woven sandwich fabric performs [J]. Composites Part A, 2000, 31(7): 671-680.
[8]
Hosur M V, Abdullah M, Jeelani S. Manufacturing and low-velocity impact characterization of hollow integrated core sandwich composites with hybrid face sheets [J]. Composite Structures, 2004, 65(1): 103-115.
[9]
杨振宇, 卢子兴, 刘振国, 李仲平. 三维四向编织复合材料力学性能的有限元分析 [J]. 复合材料学报, 2005, 22(5): 155-161. Yang Zhenyu, Lu Zixing, Liu Zhenguo, Li Zhongping. Finite element analysis of the mechanical properties of 3D braided composites [J]. Acta Materiae Compositae Sinica, 2005, 22(5): 155-161.
[10]
黄桥平, 赵桂平, 李 杰. 碳纤维/环氧树脂复合材料动态拉伸试验研究与损伤分析 [J]. 复合材料学报, 2009, 26(6): 143-149. Huang Qiaoping, Zhao Guiping, Li Jie. Experimental study on carbon fiber/epoxy laminates under dynamic tensile and their damage analysis [J]. Acta Materiae Compositae Sinica, 2009, 26(6): 143-149.
[11]
邹 健, 程小全, 陈 浩, 邵世纲. 二维织物增强层合板高速冲击后拉伸性能模拟 [J]. 北京航空航天大学学报, 2008, 34(6): 638-642. Zou Jian, Cheng Xiaoquan, Chen Hao, Shao Shigang. Tensile properties simulation of two-dimensional woven reinforced composite laminates after high velocity impact [J]. Journal of Beijing University of Aeronautics and Astronautics, 2008, 34(6): 638-642.
[12]
姚秀冬, 周 叮, 刘伟庆. 复合材料夹层板芯层内树脂柱对性能的影响 [J]. 材料科学与工程学报, 2009, 27(6): 937-941. Yao Xiudong, Zhou Ding, Liu Weiqing. Effects of resinic columns on composited sandwich plates [J]. Journal of Materials Science & Engineering, 2009, 27(6): 937-941.
[13]
周 亮, 唐予远, 聂建斌. 多胞织物结构复合材料静态弯曲性能与有限元分析 [J]. 天津工业大学学报, 2008, 27(5): 4-7. Zhou Liang, Tang Yuyuan, Nie Jianbin. Experimental and FEM calculation of 3D glass/polyester resin cellular woven composite under quasi-static three-point bending [J]. Journal of Tianjing Polytechnic University, 2008, 27(5): 4-7.
