全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

穿孔损伤大小和方向对复合材料桨叶振动特性的影响

, PP. 151-155

Keywords: 复合材料,桨叶,穿孔损伤,振动特性,有限元

Full-Text   Cite this paper   Add to My Lib

Abstract:

通过建立的全桨叶有限元模型,研究了穿孔损伤的大小和方向对桨叶振动特性的影响。以桨叶根部z=50mm处矩形剖面和中部z=835mm处翼型剖面为研究对象,分别在前缘、翼盒和后缘模拟不同口径的穿孔损伤,得到振动特性与穿孔损伤大小的关系,并通过改变前缘的穿孔损伤方向,得到振动特性与穿孔损伤方向的关系。结果表明,穿孔损伤一般不会引起各阶振动模态的改变,但会使各阶振动频率发生变化。随着损伤口径的增大,各阶振动频率都降低。损伤发生在前缘和后缘,摆振频率降低最多,发生在翼盒,扭转频率降低最多。穿孔方向对各阶振动频率的影响不仅与损伤的位置和结构有关,还与损伤剖面的几何形状有关。对于根部矩形剖面,穿孔方向与剖面弦向夹角为75°和105°对摆振频率影响最大,对于中部翼型剖面,夹角接近0°(180°)对摆振频率影响最大。

References

[1]  杨乃宾, 倪先平.直升机复合材料结构设计 [M].北京: 国防工业出版社, 2008, 11. Yang Naibin, Ni Xianping.Helicopeter composite structure design [M].Beijing: National Defense Industry Press, 2008, 11.
[2]  Pawar P M, Ganguli R.On the effect of progressive damage on composite helicopter rotor system behavior [J].Composite Structures, 2006, 78(3): 410-423.
[3]  程小全, 王 飞, 胡仁伟, 江善元.含穿孔损伤复合材料桨叶结构的振动特性 [J].复合材料学报, 2010, 27(2): 117-122. Cheng Xiaoquan, Wang Fei, Hu Renwei, Jiang Shanyuan.Vibration performance of composite blade segment with a perforation damage [J].Acta Materiae Compositae Sinica, 2010, 27(2): 117-122.
[4]  Pawar Prashant M, Ganguli Ranjan.On the effect of matrix cracks in composite helicopter rotor blade [J].Composites Science and Technology, 2005, 65(3/4): 581-594.
[5]  Joseph Fries.The effect of helicopter main rotor blade damage on the rotor blade damage on the rotor disk (whole rotor) motion, ARL-TR-2241 . Australia: Australian Radiation Laboratory, 2000.
[6]  Joseph Fries.Black Hawk helicopter vibration analysis due to main rotor damage, directional constituents of the resultant vibrations, ARL-TR-2442 . Australia: Australian Radiation Laboratory, 2001.
[7]  Roy N, Ganguli R.Helicopter rotor blade frequency evolution with damage growth and signal processing [J].Journal of Sound and Vibration, 2005, 283(3-5): 821-851.
[8]  吉桂秀, 李娇颜, 陈浩然.多分层对复合材料层合板自振特性的影响 [J].复合材料学报, 2007, 24(4): 161-165. Ji Guixiu, Li Jiaoyan, Chen Haoran.Effect of multiple delaminations on free vibration characteristic for composite laminates [J].Acta Materiae Compositae Sinica, 2007, 24(4): 161-165.
[9]  冯振宇, 李顶河, 徐建新, 程小全.含多分层损伤平面编织层合板的振动特性 [J].复合材料学报, 2009, 26(4): 186-190. Feng Zhenyu, Li Dinghe, Xu Jianxin, Cheng Xiaoquan.Free vibration characteristic of plain woven fabric laminates with multiple delaminations [J].Acta Materiae Compoeitae Sinica, 2009, 26(4): 186-190.
[10]  王 轩, 李顶河, 冯振宇, 徐建新.含穿孔-多分层混合损伤平面编织层合板自振特性 [J].复合材料学报, 2009, 26(4): 191-196. Wang Xuan, Li Dinghe, Feng Zhenyu, Xu Jianxin.Free vibration characteristic of plain woven fabric laminates with multiple delaminations around a central hole [J].Acta Materiae Compoeitae Sinica, 2009, 26(4): 191-196.
[11]  王 飞, 王 军, 程小全.含损伤复合材料层合板振动特性研究 [J].失效分析与预防, 2008, 3(4): 12-17. Wang Fei, Wang Jun, Cheng Xiaoquan.Studies on vibration performance of composite laminates with damage [J].Failure Analysis and Prevention, 2008, 3(4): 12-17.
[12]  洪 明. 分层损伤复合材料层合板振动与声特性研究 .大连: 大连理工大学, 2004: 1-3. Hong Ming.Study on vibration and sound of composite laminated plate with delamination .Dalian: Dalian Institute of Technology, 2004: 1-3.
[13]  王 军, 冯国旭, 程小全, 汪源龙.穿孔损伤位置对复合材料桨叶振动特性的影响 [J].复合材料学报, 2011, 28(1): 143-150. Wang Jun, Feng Guoxu, Cheng Xiaoquan, Wang Yuanlong.Influence on composite blade vibration characteristics of perforation damage position [J].Acta Materiae Compoeitae Sinica, 2011, 28(1): 143-150.
[14]  谢元丕, 冯 刚.ANSYS三维实体单元与板壳单元的组合建模研究 [J].机械设计, 2009, 26(4): 5-7. Xie Yuanpi, Feng Gang.Study of ANSYS modelling on the combination of 3D entity unit and plate-shell unit [J].Journal of Machine Design, 2009, 26(4): 5-7.
[15]  刘湘一, 李文辉, 胡国才.复合材料桨叶固有特性计算与试验研究 [J].海军航空工程学院学报, 2009, 24(3): 245-247. Liu Xiangyi, Li Wenhui, Hu Guocai.Calculation and test for natural characteristic of composite rotor blade [J].Journal of Naval Aeronautical and Astronautical University, 2009, 24(3): 245-247.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133