Culler A J, Crowell A R, McNamara J J. Studies on fluid-structural coupling for aerothermoelasticity in hypersonic flow [J]. AIAA Journal, 2010, 48(8): 1721-1738.
[2]
傅恒志. 未来航空发动机材料面临的挑战与发展趋向 [J]. 航空材料学报, 1998, 18(4): 52-61. Fu Hengzhi. Challenge and development trends to future areo engine materials [J]. Journal of Aeronautical Materials, 1998, 18(4): 52-61.
[3]
Soyris P, Foucault A, Parenteau J M, et al. C/SiC based rigid external thermal protection system for future reusable launch vehicles: Generic shingle, pre-X/FLPP anticipated development test studies //13th International Space Planes and Hypersonic Systems and Technologies Conference. Capua, Italy: AIAA, 2005.
[4]
Dorsey J T, Poteet C C, Chen R R, et al. Metallic thermal protection system technology development: Concepts, requirements and assessment overview //40th Aerospace Sciences Meeting & Exhibit. Reno, Nevada: AIAA, 2002.
[5]
杨亚政, 杨嘉陵, 方岱宁. 高超声速飞行器热防护材料与结构的研究进展 [J]. 应用数学和力学, 2008, 29(1): 47-56. Yang Yazheng, Yang Jialing, Fang Daining. Research progress on the thermal protection materials and structures in hypersonic vehicles [J]. Applied Mathematics and Mechanics, 2008, 29(1): 47-56.
[6]
李健芳. 新型耐高温多层隔热结构研究 . 哈尔滨: 哈尔滨工业大学, 2007: 2-3. Li Jianfang. Study on new-typed high-temperature endurable multilayer insulation . Harbin: Harbin Institute of Technology, 2007: 2-3.
[7]
李仲平, 卢子兴, 冯志海, 等. 高温炭化处理对三维五向碳/酚醛编织复合材料拉伸性能的影响 [J]. 复合材料学报, 2007, 24(2): 105-112. Li Zhongping , Lu Zixing , Feng Zhihai, et al. Effect of high temperature carbonization on the tensile properties of integrally-braided 5D carbon/phenolic composites [J]. Acta Materiae Compositae Sinica, 2007, 24(2): 105-112.
[8]
鞠 苏, 江大志, 杜 刚, 等. 超轻质全复合材料桁架结构的制备及弯曲特性 [J]. 复合材料学报, 2009, 26(3): 1-6. Ju Su , Jiang Dazhi, Du Gang, et al. Fabrication and flexural characteristics of ultra-light weight integral composite truss structure [J]. Acta Materiae Compositae Sinica, 2009, 26(3): 1-6.
[9]
徐 兴, 汪劲丰, 凌道盛, 等. 碳纤维酚醛树脂复合材料粘性系数的识别 [J]. 复合材料学报, 2002, 19(4): 1-2. Xu Xing, Wang Jinfeng, Ling daosheng, et al. Viscosity coefficients dentification of composites consisting of carbon fiber and resin [J]. Acta Materiae Compositae Sinica, 2002, 19(4): 1-2.
[10]
薛莹莹. 隔热材料导热系数预测及其在发动机排气管隔热中的应用 . 大连: 大连理工大学, 2006: 16-17. Xue Yingying. The estimate of thermal conductivity of thermal insulating materials and its application on the exhaust pipe of engine . Dalian: Dalian University of Technology, 2006: 16-17.
[11]
李光珠, 沈燕侠, 詹茂盛. 芳香族聚酰亚胺泡沫的隔热性能研究 [J]. 材料工程, 2009(7): 43-46. Li Guangzhu, Shen Yanxia, Zhan Maosheng. Study on performance of thermal insulation of aromatic polyimide foams [J]. Journal of Materials Engineering, 2009(7): 43-46.
[12]
胡利明, 高 芳, 陈 文. 氧化锆纤维及其制品 [J]. 人工晶体学报, 2009, 38(1): 265-270. Hu Liming, Gao Fang, Chen Wen. ZrO2 fiber and products [J]. Journal of Synthetic Crystals, 2009, 38(1): 265-270.
[13]
姜贵庆, 俞继军. 长时间气动加热飞行器的隔热机理 [J]. 宇航材料工艺, 2006(1): 27-29. Jiang Guiqing, Yu Jijun. Insulation mechanism of spacecraft with long time aero-heating [J]. Aerospace Materials and Technology, 2006(1): 27-29.
[14]
Morino Y, Yoshinaka T, Auweter-Kurtz M, et al. Erosion characteristics of SiC coated C/C materials in arc-heated high enthalpy air flow [J]. Acta Astronautica, 2002, 50(3): 149-158.
[15]
Tang Sufang, Deng Jingyi, Wang Shijun, et al. Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2-SiC composites [J]. Corrosion Science, 2009, 51(1): 54-61.
[16]
徐大军, 蔡国飙. 高超声速飞行器关键技术量化评估方法 [J]. 北京航空航天大学学报, 2010, 36(1): 110-113. Xu Dajun, Cai Guobiao. Quantificational evaluation method for key technologies of hypersonic vehicle [J]. Journal of Beijing University of Aeronautics and Astronautics, 2010, 36(1): 110-113.
[17]
张宗强, 匡松连, 尚 龙, 等. 树脂基复合材料长时间烧蚀防热的应用研究 [J]. 宇航材料工艺, 2007(6): 29-31. Zhang Zongqiang, Kuang Songlian, Shang Long, et al. Resin composites on long time ablation and thermal protection [J]. Aerospace Materials and Technology, 2007(6) : 29-31.
[18]
刘初平. 电弧风洞钝楔试验技术及其应用研究 . 长沙: 国防科学技术大学, 2004: 1-3. Liu Chuping. A study of blunted-wedge holder and its application in CARDC’s arc-heated wind tunnel . Changsha: National University of Defense Technology, 2004: 1-3.
[19]
徐 翔, 伍贻兆, 程克明, 等. 高超声速风洞气动布局设计 [J]. 南京航空航天大学学报, 2008, 40(2): 271-274. Xu Xiang, Wu Yizhao, Cheng Keming, et al. Aerodynamic configuration design of hypersonic wind tunnels [J]. Journal of Nanjing University of Aeronautics & Astronautics, 2008, 40(2): 271-274.
[20]
刘德英, 艾邦成, 俞继军. 材料长时间加热试验及隔热性能预测分析 [J]. 空气动力学学报, 2008, 26(z1): 106-110. Liu Deying, Ai Bangcheng, Yu Jijun. Long-time heating test and forecast analysis on heat insulation capability of material [J]. Acta Aerodynamica Sinica, 2008, 26(z1): 106-110.
[21]
Wu Haitang, Zhang Weigang. Fabrication and properties of ZrB2-SiC-BN machinable ceramics [J]. Journal of the European Ceramic Society, 2010, 30(4): 1035-1042.
