Kuroshima Y, Kondo Y, Okada S. Development of vitrified diamond grinding wheel for engineering ceramics [J]. J Ceram Soc Jpn, 1985, 93(9): 587-589.
[2]
Tanaka T, Ikawan, Ueno N. A ceramic aspect of vitrified bond for diamond grinding wheel [J]. Bull Jpn Soc Prec Eng 1985, 19(3): 221-223.
[3]
Kuan H L, Shih F P, Shun T L. Sintering parameters and wear performances of vitrified bond diamond grinding wheels [J]. International Journal of Refractory Metals & Hard Materials, 2007, 25(1): 25-31.
[4]
李志宏, 袁启明, 杨正方. 陶瓷结合立方氮化硼磨削工具材料制备研究 [J]. 复合材料学报, 2003, 20(5): 39-43. Li Zhihong, Yuan Qiming, Yang Zhengfang. Study on manufacturing technology of vitrified bond CBN grinding tools [J]. Acta Materiae Compositae Sinica, 2003, 20(5): 39-43.
[5]
Sabri L, Mansori M E. Process variability in honing of cylinder liner with vitrified bonded diamond tools [J]. Surface & Coatings Technology, 2009, 204(6/7): 1046-1050.
[6]
Kopac J, Krajnik P. High-performance grinding—A review [J]. Journal of Materials Processing Technology, 2006, 175(1-3): 278-284.
[7]
Jackson M J, Barlow N, mills B. The effect of bond composition on the strength of partially-bonded vitrified ceramic abrasives [J]. Journal of Materials Science Letters, 1994, 13(17): 1287-1289.
[8]
Wang P F, Li Z H, Li J, et al. Effect of ZnO on the interfacial bonding between Na2O-B2O3-SiO2 vitrified bond and diamond [J]. Solid State Sciences, 2009, 11(8): 1427-1432.
[9]
Hou Y G, Qiao G Y, Shang Y, et al. Effects of nano-AlN and sintering atmosphere on microstructure and properties of vitrified bond [J]. Composites: Part B, 2011, 42(4): 756-762.
[10]
王志起, 万 隆, 胡伟达, 等. Ti对陶瓷结合剂及金刚石磨具性能的影响 [J]. 金刚石与磨料磨具工程, 2011, 31(2): 50-54. Wang Zhiqi, Wan Long, Hu Weida, et al. Effect of titanium on the properties of vitrified bond and diamond grinding tool [J]. Diamond & Abrasives Engineering, 2011, 31(2): 50-54.
[11]
Zhang X H, Wang Y H, Zang J B, et al. Improvement of thermal stability of diamond by adding Ti powder during sintering of diamond/borosilicate glass composites [J]. Journal of the European Ceramic Society, 2011, 31(10): 1897-1903.
[12]
侯永改, 王改民, 荆运杰. 金属及合金粉对低温陶瓷结合剂性能影响 [J]. 中国陶瓷, 2002, 38(4): 13-15. Hou Yonggai, Wang Gaimin, Jing Yunjie. Effect of metal and alloy on the property of the bond [J]. China Ceramics, 2002, 38(4): 13-15.
[13]
关 岩, 徐晓伟, 杨 亮. 超硬CBN磨具用陶瓷/金属复合结合剂的研究 [J]. 人工晶体学报, 2009, 38s: 186-190. Guan Yan, Xu Xiaowei, Yang Liang. Research on ceramic/metal compound bond used in super hard CBN abrasive tools [J]. Journal of Synthetic Crystals, 2009, 38s: 186-190.
[14]
王双喜, 刘雪敬, 耿 彪, 等. 金属结合剂金刚石磨具的研究进展 [J]. 金刚石与磨料磨具工程, 2006, 15(4): 71-75. Wang Shuangxi, Liu Xuejing, Geng Biao, et al. Development of metal bonded diamond abrasive tools [J]. Diamond & Abrasives Engineering, 2006, 15(4): 71-75.
[15]
程一兵, 许 超, 潘素瑛, 等. Fe3+在钠硅酸盐玻璃中结构效应的研究 [J]. 硅酸盐学报, 1984, 12(4): 396-403. Cheng Yibing, Xu Chao, Pan Suying, et al. Investigation on structural effect of Fe3+ in sodium silicate glasses [J]. Journal of the Chinese Ceramic Society, 1984, 12(4): 396-403.
[16]
许育东, 刘 宁, 石 敏, 等. 纳米增强金属陶瓷的组织及热冲击性能 [J]. 复合材料学报, 2006, 23(5): 44-50. Xu Yudong, Liu Ning, Shi Min, et al. Microstructural characteristics and thermal shock resistance of nano-powder reinforcing cermets [J]. Acta Materiae Compositae Sinica, 2006, 23(5): 44-50.
