赵渠森, 赵攀峰. 真空辅助成型工艺(VARI)研究 [J]. 纤维复合材料, 2002(1): 42-46. Zhao Qusen, Zhao Panfeng. A study of VARI [J]. Fiber Composites, 2002(1): 42-46.
[2]
Brouwer W D, Herpt van E C F C, Labordus M. Vacuum injection moulding for large structural applications [J]. Composites, Part A: Applied Science and Manufacturing, 2003, 34(6): 551-558.
[3]
陶积柏, 王绍凯, 李 敏, 顾轶卓, 张佐光, 李志远. 三维夹芯层连织物复合材料真空辅助成型工艺影响因素 [J]. 复合材料学报, 2010, 27(4): 81-86. Tao Jibai, Wang Shaokai, Li Min, Gu Yizhuo, Zhang Zuoguang, Li Zhiyuan. Influence factors of vacuum assisted resin transfer molding proeess for 3D spacer fabric composites [J]. Acta Materiae Compositae Sinica, 2010, 27(4): 81-86.
[4]
刘 相, 洪晓斌, 谢 凯. 低温固化双酚F型环氧树脂体系的化学流变模型 [J]. 复合材料学报, 2009, 26(2): 85-89. Liu Xiang, Hong Xiaobin, Xie Kai. Chemo-rheological model of low temperature curing bisphenol-F epoxy resin system [J]. Acta Materiae Compositae Sinica, 2009, 26(2): 85-89.
[5]
Bender D, Schuster J, Heider D. Flow rate control during vacuum-assisted resin transfer molding (VARTM) processing [J]. Composites Science and Technology, 2006, 66(13): 2265-2271.
[6]
杨金水, 肖加余, 曾竟成, 彭超义. 真空导入模塑工艺树脂流动行为研究进展 [J]. 宇航材料工艺, 2010(1): 5-8. Yang Jinshui, Xiao Jiayu, Zeng Jingcheng, Peng Chaoyi. Review on resin flow behavior in vacuum infusion molding process [J]. Aerospace Materials & Technology, 2010(1): 5-8.
[7]
Modi D, Correia N, Johnson M, Long A, Rudd C, Robitaille F. Active control of the vacuum infusion process [J]. Composites, Part A: Applied Science and Manufacturing, 2007, 38(5): 1271-1287.
[8]
Yenilmez B, Murat Sozer E. Compaction of E-glass fabric preforms in the vacuum infusion process, A: Characterization experiments [J]. Composites, Part A: Applied Science and Manufacturing, 2009, 40(4): 499-510.
[9]
Williams C D, Grove S M, Summerscales J. The compression response of fibre-reinforced plastic plates during manufacture by the resin infusion under flexible tooling method [J]. Composites, Part A: Applied Science and Manufacturing, 1998, 29(1/2): 111-114.
[10]
Hammami A, Gebart B R. Analysis of the vacuum infusion molding process [J]. Polymer Composites, 2000, 21(1): 28-40.
[11]
Modi D, Johnson M, Long A, Rudd C. Analysis of pressure profile and flow progression in the vacuum infusion process [J]. Composites Science and Technology, 2009, 69(9): 1458-1464.
[12]
Yenilmez B, Senan M, Sozer E M. Variation of part thickness and compaction pressure in vacuum infusion process [J]. Composites Science and Technology, 2009, 69(11/12): 1710-1719.
[13]
Grimsley B W, Pascal H, Song X L, Cano R J, Loos A C, Byron P R. Flow and compaction during the vacuum assisted resin transfer moulding process [J]. International SAMPE Technology Conference, 2001, 33: 140-153.
[14]
Dave R, Kardos J L, Dudukovic M P. A model for resin flow during composite processing: Part 1-General mathematical development [J]. Polymer Composites, 1987, 8(1): 29-38.
