Bijsterbosch H, Gaymans R J. Impregnation of glass rovings with a polyamide melt. Part 1: Impregnation bath [J]. Composites Manufacturing, 1993, 4(2): 85-92.
[2]
李艳霞, 李 敏, 张佐光, 顾轶卓. L形复合材料层板热压工艺密实变形过程的数值模拟 [J]. 复合材料学报, 2008, 25(3): 78-83. Li Yanxia, Li Min, Zhang Zuoguang, Gu Yizhuo. Numerical simulation on resin flow of laminated composites in hot pressing process [J]. Acta Materiae Compositae Sinica, 2008, 25(3): 78-83.
[3]
张纪奎, 郦正能, 关志东, 程小全, 刘 涛. 复合材料层合板固化压实过程有限元数值模拟及影响因素分析 [J]. 复合材料学报, 2007, 24(2): 125-130. Zhang Jikui, Li Zhengneng, Guan Zhidong, Cheng Xiaoquan, Liu Tao. Compaction of laminated composites: Numerical simulation and analysis on influencing factors [J]. Acta Materiae Compositae Sinica, 2007, 24(2): 125-130.
[4]
Peltonen P, Lahteenkorva K, Paakkonen E J, Jarvela P K, Tormala P. The influence of melt impregnation parameters on the degree of impregnation of a polypropylene/glass fibre prepreg [J]. Journal of Thermoplastic Composite Materials, 1992, 5(4): 318-343.
[5]
Erickson W D. Belt selection and application for engineers [M]. New York: Marcel Dekker Inc, 1987.
[6]
Wilson S D R. Lateral spreading of fibre tows [J]. Journal of Engineering Mathematics, 1997, 32(1): 19-26.
[7]
Weustink T N. Development of a rapid thermoplastic impregnation device. [D]Netherlands: Delft University, 2008.
[8]
Bates P J, Kendall J, Taylor D, Cunningham M. Pressure build-up during melt impregnation [J]. Composites Science and Technology, 2001, 62(3): 379-384.
Gibson A G, M nson J A. Impregnation technology for thermoplastic matrix composites [J]. Composites Manufacturing, 1992, 3(4): 223-233.
[12]
Xian G, Pu H T, Yi X S, Pan Y. Parametric optmisation of pin-assisted-melt impregnation of glass fiber/polypropylene by taguchi method [J]. Journal of Composite Materials, 2006, 40(23): 2087-2097.
[13]
Chandler H W, Devlin B J, Gibson A G. A model for the continuous impregnation of fibre tows in resin baths with pins [J]. Plastics, Rubber and Composites Processing and Applications, 1992, 18(4): 215-220.
[14]
Gaymans R J, Wevers E. Impregnation of a glass fibre roving with a polypropylene melt in a pin assisted process [J]. Composites, Part A: Applied Science and Manufacturing, 1998, 29(5/6): 663-670.
[15]
Bates P J, Charrier J M. Effect of process parameters on melt impregnation of glass roving [J]. Journal of Thermoplastic Composite Materials, 1999, 12(4): 276-296.
