全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

耐温布拉格光栅传感器用纳米蒙脱土改性环氧丙烯酸酯涂层的制备

, PP. 62-66

Keywords: 耐温涂层,纳米蒙脱土,环氧丙烯酸酯,FBG传感器,复合材料

Full-Text   Cite this paper   Add to My Lib

Abstract:

对纳米蒙脱土(OMMT)进行改性,用改性后的蒙脱土对环氧丙烯酸酯(EA)涂层进行改性,并对改性后的OMMT/EA涂层进行了力学性能和热性能测试。研究表明,加入质量分数2%改性蒙脱土的OMMT/EA涂层性能最好。OMMT的加入可提高涂层的拉伸性能、附着力和硬度,并有效提高EA涂层的玻璃化温度,降低其线性热膨胀系数。电镜和XRD分析表明,OMMT在OMMT/EA涂层中以单层片层均匀分布。将涂有该涂层的光纤布拉格光栅(FBG)传感器埋入复合材料中,经一定温度与压力成型后,与涂有未改性EA涂层的FBG传感器采集到的信号进行对比,发现改性后涂层可明显降低FBG传感器信号滞后现象。

References

[1]  邵洪峰, 张春熹. 传感用耐热光纤技术 [J]. 光电子·激光, 2004, 15(5): 251-253. Shao Hongfeng, Zhang Chunxi. Heat resistance optical fiber technology used as sensors [J]. Journal of Optoelectronics·Laser, 2004, 15(5): 251-253.
[2]  李 刚, 欧书方, 徐 剑. 石英光纤涂层材料 [J]. 涂料技术与文摘, 2008, 29(6): 2-5. Li Gang, Ou Shufang, Xu Jian. Introduction coating materials for silica optical fibers [J]. Coatings Technology & Abstract, 2008, 29(6): 2-5.
[3]  李智忠, 王 鑫, 杨华勇, 等. 光纤光栅二次涂敷封装温度特性的研究 [J]. 光电子·激光, 2006, 17(10): 1191-1195. Li Zhizhong, Wang Xin, Yang Huayong, et al. Study on the temperature characteristic of fiber grating with second coating [J]. Journal of Optoelectronics·Laser, 2006, 17(10): 1191-1195.
[4]  武湛君, 万里冰, 张博明, 等. 光纤光栅应变传感器监测复合材料层板疲劳过程 [J]. 复合材料学报, 2004, 21(6): 75-81. Wu Zhanjun, Wan Libing, Zhang Boming, et al. Fatigue process monitoring for composite laminates with fiber Bragg gratings [J]. Acta Materiae Compositae Sinica, 2004, 21(6): 75-81.
[5]  武湛君, 张博明, 王殿富, 等. 基于折射率变化的复合材料固化在线监测研究 [J]. 复合材料学报, 2002, 19(6), 87-91. Wu Zhanjun, Zhang Boming, Wang Dianfu, et al. In-situ monitoring of composite cure process with fiber optic refractive sensors [J]. Acta Materiae Compositae Sinica, 2002, 19(6), 87-91.
[6]  Shiue J, Matthewson M J, Stupak P R, Rondinella V V. Effects of silica nano particle addition to the secondary coating of dual-coated optical fibers [J]. Acta Materialia, 2006, 54(10): 2631-2636.
[7]  蔡春平, 高秀敏. 光纤涂料对光纤衰减的影响 [J]. 应用光学, 2001, 22(3): 20-24. Cai Chunping, Gao Xiumin. Effect of fiber coating on attenuation of fiber [J]. Journal of Applied Optics, 2001, 22(3): 20-24.
[8]  李 晗. UV固化改性环氧丙烯酸酯耐热光纤涂层的研究 . 武汉: 武汉理工大学, 2011. Li Han. Research on UV curable modified epoxy acrylate resin optical fiber coating of heat-resistant . Wuhan: Wuhan University of Technology, 2011.
[9]  申克静. 耐热性紫外光固化光纤涂料的制备 . 长春: 长春理工大学, 2006. Shen Kejing. Preparation of UV curing optical fibercoating with heat-resistance . Changchun: Changchun University of Technology, 2006.
[10]  McKie A D W, Addison R C, Jr. Laser-based ultrasonic inspection with a fiber-coupled scanning cassegrain system [J]. Ultrasonics, 2002, 40(10): 1037-1046.
[11]  徐 骏, 黄玮石, 王立斌. 紫外光固化光纤内层涂覆材料的合成研究 [J]. 涂料工业, 2004, 34(3): 22-25. Xu jun, Huang Weishi, Wang Libin. Development of UV-curing coatings for optical fiber [J]. Paint & Coatings Industry, 2004, 34(3): 22-25.
[12]  Glisic Branko, Inaudispie Daniele. Integration of long-gage fiber-optic sensor into a fiber-reinforced composite sensing tape [J]. International Symposium on Smart Structures and Materials. San Diego, USA: SPIE, 2003, 3: 2-6.
[13]  Ryczkowski J, Rayss J. Polymer protective coatings of optical fibres [J]. Vibrational Spectroscopy, 2000, 22(1/2): 95-100.
[14]  Wang Weizhi, Cheng Kexun. Synthesis and characterization of ultraviolet light-curable resin for optical fiber coating [J]. European Polymer Journal, 2003, 39(9): 1891-1897.
[15]  Masson F, Decker C, Andreb S, Andrieu X. UV-curable formulations for UV-transparent optical fiber coatings Ⅰ : Acrylic resins [J]. Progress in Organic Coatings, 2004, 49(1): 1-12.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133