全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

基于NCF技术的RTM成型复合材料T型接头高效制造与验证

, PP. 99-104

Keywords: 复合材料,T型接头,非屈曲经编织物(NCF),树脂传递模塑(RTM)

Full-Text   Cite this paper   Add to My Lib

Abstract:

选用多层非屈曲经编织物(NCF)作为增强体,提高了预成型体的铺覆效率及准确性,同时根据T型接头的结构特点将其组合成工字梁形式并依此设计成型模具,采用树脂传递模塑(RTM)成型工艺实现了复合材料T型接头的高效制造,并对其拉伸和压缩力学性能进行了试验研究。结果表明:T型接头拉伸破坏由孔边蒙皮纤维拉断和腹板分层拉脱造成;而压缩破坏则由腹板翻边分层屈曲和接头中部蒙皮纤维压断造成;T接头拉伸破坏载荷高于其压缩的破坏载荷。

References

[1]  章亚东, 段跃新, 左 璐, 等. 经编织物法制备连续纤维增强热塑性复合材料的微观形貌和浸润过程分析 [J]. 复合材料学报, 2004, 21(6): 63-69. Zhang Yadong, Duan Yuexin, Zuo Lu, et al. Analyses of microstructure and impregnation process of FRTP composites manufactured from warp-knitting fabric [J]. Acta Materiae Compositae Sinica, 2004, 21(6): 63-69.
[2]  Yu W R, Philip H, Andrew L. Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation [J]. Composites Part A, 2005, 36(8): 1079-1093.
[3]  Meyer B C, Katsiropoulos C V, Pantelakis S G. Hot forming behavior of non-crimp fabric PEEK/C thermoplastic composites [J]. Composite Structures, 2009, 90(2): 225-232.
[4]  Lee J S, Seok J H, Yu W R, et al. The effect of blank holder force on the stamp forming behavior of non-crimp fabric with a chain stitch [J]. Composites Science and Technology, 2007, 67(3/4): 357-366.
[5]  韩 帅, 段跃新, 李 超, 等. 不同针织结构经编碳纤维复合材料弯曲性能 [J]. 复合材料学报, 2011, 28(5): 52-57. Han Shuai, Duan yuexin, Li Chao, et al. Bending properties of non-crimp stitched carbon fabric reinforced composites of different knit patterns [J]. Acta Materiae Compositae Sinica, 2011, 28(5): 52-57.
[6]  梁志勇, 张佐光, 周金来. 多向无皱褶纤维织物及复合材料 [J]. 玻璃钢/复合材料, 1994(6): 17-21. Liang Zhiyong, Zhang Zuoguang, Zhou Jinlai. Multiaxial non-crimp fabrics and composites [J]. Fiber Reinforce Plastics/Composites, 1994(6): 17-21.
[7]  Toftegaard H, Lystrup A. Design and test of lightweight sandwich T-joint for naval ships [J]. Composites Part A, 2005, 36(8): 1055-1065.
[8]  Cartie D D R, Anno G D, Poulin E, et al. 3D reinforcement of stiffener-to-skin T-joints by Z-pinning and tufting [J]. Engineering Fracture Mechanics, 2006, 73(16): 2532-2540.
[9]  Shenoi R A, Hawkins G L. Influence of material and geometry variations on the behaviour of bonded tee connections in FRP ships [J]. Composites, 1992, 23(5): 335-345.
[10]  Phillips H J, Shenoi R A. Damage tolerance of laminated tee joints in FRP structures [J]. Composites Part A, 1998, 29(4): 465-478.
[11]  Rugg K L, Cox B N, Massabo R. Mixed mode delamination of polymer composite laminates reinforced through the thickness by z-fibers [J]. Composites Part A, 2002, 33(2): 177-190.
[12]  益小苏. 先进复合材料技术研究与发展 [M]. 北京: 国防工业出版社, 2006.
[13]  何海东, 贾玉玺, 丁妍羽, 等. 无弯曲纤维织物面内渗透率的结构相关性 [J]. 复合材料学报, 2011, 28(5): 70-76. He Haidong, Jia Yuxi, Ding Yanyu, et al. Structure-relationship of the in-plane permeability of non-crimped fabrics [J]. Acta Materiae Compositae Sinica, 2011, 28(5): 70-76.
[14]  马 立. RFI工艺成型碳NCF/环氧5228A复合材料研究 [J]. 玻璃钢/复合材料, 2008(1): 21-24. Ma Li. Study on carbon fiber NCF/epoxy 5228A composites formed by RFI process [J]. Fiber Reinforce Plastics/Composites, 2008(1): 21-24.
[15]  顾璐英, 蒋高明. 多轴向经编织物编织工艺探讨 [J]. 玻璃钢/复合材料, 2010(3): 76-80. Gu Luying, Jiang Gaoming. Knitting technology research of multi-axial warp-knitted fabric [J]. Fiber Reinforce Plastics/Composites, 2010(3): 76-80.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133