张 明, 张云灿, 吕忆农. 相容性对PA66/POE共混材料形态、 微结构及力学性能的影响 [J]. 复合材料学报, 2005, 22(5): 113-119. Zhang Ming, Zhang Yuncan, Lü Yinong. Effects of miscibility on the morphology and microstructure and mechanical properties of PA66/POE blends [J]. Acta Materiae Compositae Sinica, 2005, 22(5): 113-119.
[2]
严 伟, 秦舒浩, 于 杰, 等. 有机蒙脱土对ABS-PA6共混物形态结构与力学性能的影响 [J]. 复合材料学报, 2010, 27(1): 37-41 . Yan Wei, Qin Shuhao, Yu Jie, et al. Effects of organic montmorillonite on morphology and mechanical properties of acrylonitrile-butadiene-styrene (ABS)-polyamide 6 (PA6) blends [J]. Acta Materiae Compositae Sinica, 2010, 27(1): 37-41.
[3]
王军祥, 顾明元, 朱真才, 等. 碳纤维和二硫化钼混杂增强尼龙复合材料的摩擦学性能研究 [J]. 复合材料学报, 2003, 20(2): 13-18. Wang Junxiang, Gu Mingyuan, Zhu Zhencai, et al. Tribological properties of hybrid carbon fiber and MoS2 reinforced polyamide 1010 composites [J]. Acta Materiae Compositae Sinica, 2003, 20(2): 13-18.
[4]
Zhang Xiaomin, Yin Zhihui, Na Tainhai, et al. Morphology, mechanical properties and interaction behaviour of PA1010/PP/PP-g -GMA ternary blends [J]. Polymer, 1997, 38(24): 5905-5912.
[5]
Yan Litang, Sheng Jing. Analysis of phase morphology and dynamics of immiscible PP/PA1010 blends and its partial-miscible blends during melt mixing from SEM pattern [J]. Polymer, 2006, 47(8): 2894-2903.
[6]
Zhang Xiaomin, Yin Jinghua. Interaction characterization of PA1010/PP blends using PP-g-AA as compatibilizer [J]. Polymer Engineering and Science, 1997, 37(1): 197-204.
[7]
杨风霞, 杜荣昵, 李 博, 等. POE-g-MAH反应性增容PA1010/PP 共混物的性能研究 [J]. 高分子学报, 2010(3): 366-371. Yang Fengxia, Du Rongni, Li Bo, et al. Properties of PA1010/PP blends modified by reactive compatibilization with POE-g-MAH [J]. Acta Polymer Sinica, 2010(3): 366-371.
[8]
Kusmono, Mohd Ishak Z A, Chow W S, et al. Compatibilizing effect of SEBS-g-MA on the mechanical properties of different types of OMMT filled polyamide 6/polypropylene nanocomposites [J]. Composites Part A, 2008, 39(12): 1802-1814.
[9]
Wang Cong, Su Juanxia, Li Jiang, et al. Phase morphology and toughing mechanism of polyamide 6/EPDM-g-MA blends obtained via dynamic packing injection molding [J]. Polymer, 2006, 47(9): 3197-3206.
[10]
Wang Yong, Xiao Yan, Zhang Qin, et al. The morphology and mechanical properties of dynamic packing injection molded PP/PS blends [J]. Polymer, 2003, 44(5): 1469-1480.
[11]
Li Jiang, Zhang Qin, Wang Cong, et al. Effect of compatibility on phase morphology and orientation of isotactic polypropylene (IPP) blends obtained by dynamic packing injection molding [J]. Chinese Journal of Polymer Science, 2006, 24(4): 379-387.
[12]
傅 强. 聚烯烃注射成型 [M]. 北京: 科学出版社, 2007: 2-4.
[13]
杨风霞, 杜荣昵, 罗 锋, 等. PTW对PA1010/PP共混物的增容作用 [J]. 高等学校化学学报, 2010, 31(1): 186-192. Yang Fengxia, Du Rongni, Luo Feng, et al. Compatibilization effect of PTW on polymer blends of PA1010/PP [J]. Chemical Journal of Chinese Universities, 2010, 31(1): 186-192.
[14]
陈广新, 刘景江. 尼龙1010分别与未接枝和接枝马来酸酐的高抗冲聚苯乙烯的共混体系研究 [J]. 高分子学报, 1999(5): 557-563. Chen Guangxin, Liu Jingjiang. Blends of polyamide 1010 with ungrafted and maleic anhydride grafted high impact polystyrene [J]. Acta Polymer Sinica, 1999(5): 557-563.
